1-Piece, Pinned & Unpinned Crank Hub w/ Crank Bolt Capture Plate, BMW N55 & S55
Part number: 034-113-Z015
€996.72
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The factory multi-piece crank hub on BMW N55 and S55 engines is a known weak point that can cause catastrophic timing drift or engine failure under high power. This 1-Piece Pinned/Unpinned Crank Hub with Crank Bolt Capture Plate replaces the OE multi-piece design with a motorsport-grade solution that eliminates slip and secures long-term reliability under high load.
Description
A Permanent Fix for the Factory Crank Hub Problem
The factory crank hub used in BMW's N55 and S55 engines is a well-known weak point, particularly as power levels increase. The OEM design uses three individual sprocketed pieces that drive the timing chains off the crankshaft. None of these sprockets are mechanically linked together or to the crankshaft; they rely only on friction washers and the clamping force of the crank bolt to stay aligned.
Under higher horsepower, rapid throttle transitions, hard launches, or even completely stock operation, the friction surfaces can slip. When this happens, the timing components rotate out of alignment, causing the engine to fall out of mechanical timing. This can quickly lead to bent valves, piston-to-valve contact, or catastrophic engine failure.
A True Mechanical Solution Instead of More Friction
The 1-Piece Pinned Crank Hub replaces the entire multi-piece factory stack with a single CNC-machined billet EN36 steel unit. By combining all timing sprockets into one rigid body, every driven timing component remains physically linked, eliminating the possibility of internal hub slip.
You can configure the hub in the way that best suits your build:
Unpinned Installation
The hub can be installed in an unpinned configuration using the factory crankshaft with no drilling required. This setup works seamlessly with the included Crank Bolt Capture Plate, which locks the crank bolt in position and prevents any chance of bolt movement.
Pinned Installation (Recommended for Heavy Abuse/High Power)
For those who want maximum mechanical security, the hub can also be installed in a 4-pin configuration, physically interlocking it with the crankshaft. One of the key advantages of this Crank Hub is that it eliminates the need for a separate hub version — you can choose pinned or unpinned using the same part. To ensure safe and accurate drilling, the kit includes a carbide drill bit and a dedicated drill guide and alignment jig. Most competing kits only provide a high-strength steel drill bit, which wears quickly when cutting into the crankshaft.
Crank Bolt Capture Plate: The Second Layer of Defense
Machined from 6061-T6 billet aluminum and anodized for long-lasting protection, the Capture Plate surrounds and locks the OE crank bolt in place, preventing any possibility of bolt walk-out. Paired with the 1-Piece Hub, this configuration eliminates both crank bolt and crank hub slip, protecting against the most common N55/S55 timing failures.
Elongated mounting slots allow the Capture Plate to be used with both OE and aftermarket crank hubs, ensuring a precise and secure installation.
Built to Protect Your Engine, No Matter the Power Level
From aggressively tuned street builds to fully track-prepped cars, this 1-Piece Pinned Crank Hub and Capture Plate system is engineered to be a definitive solution for securing the crank hub, delivering reliability and confidence under any power level.
1-Piece Crank Hub Features
- 1-Piece CNC-Machined Hub, Installable In 4-Pin Or Unpinned Configuration
- Prevents Crank Hub Slip And Failure On High-Power Engines
- Billet EN36 Steel, Heat-Treated With 0.75 mm Case Hardening
- High-Strength Design Built For Extreme Power And Abuse
- Optional Precision Dowels Mechanically Lock Hub To Crank (Crank Drilling Required)
- Complete Installation Kit: Jig, Guide, Locating Bolt, And Carbide Drill Bit
- Includes New OE Crank Bolt
Crank Bolt Capture Plate Features
- Machined From 6061-T6 Billet Aluminum
- Anodized For Durability And Long-Lasting Finish
- Surrounds And Locks OE Crank Bolt, Preventing Loosening
- Fits Aftermarket Or OE Crank Hub With Elongated Slots For Secure Install
- Prevents 3-Piece Crank Hub Slip On S55 And N55 Engines
- Installs With Engine In-Situ By Dropping Radiator For Access
- Crank Hub Material
- Billet EN36-Stahl, wärmebehandelt
- Case Hardening
- 0,75 mm
- Capture Plate Material
- 6061-T6 Billet-Aluminium, eloxiert
- Installation Configuration
- Gestiftet (4-Pin) oder ungestiftet
- Shipping weight
- 1.2 kg
–
BMW (15)
- 3 Series F80 (2015-2018) S55 3.0L
- 3 Series F3X (2012-2019) N55 3.0L
- 3 Series E9X (2006-2013) N55 3.0L
- 4 Series F82/F83 (2015-2020) S55 3.0L
- 4 Series F3X (2012-2019) N55 3.0L
- 5 Series F07/F10/F11 (2009-2017) N55 3.0L
- 6 Series F06/F12/F13 (2011-2018) N55 3.0L
- 7 Series F01/F02 (2012-2015) N55 3.0L
- X1 Series E84 (2009-2015) N55 3.0L
- X3 Series F25 (2010-2017) N55 3.0L
- X4 Series F26 (2014-2018) N55 3.0L
- X5 Series F15 (2014-2018) N55 3.0L
- X5 Series E70 (2006-2013) N55 3.0L
- X6 Series F16 (2014-2019) N55 3.0L
- X6 Series E71 (2008-2014) N55 3.0L
- 1-Piece CNC-Machined Crank Hub
- Crank Bolt Capture Plate
- New OE Crank Bolt
- Drill Jig And Guide
- Locating Bolt
- Carbide Drill Bit
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com











