Germany

← Back to catalogue

2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-1026
  • 2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-1026
  • 2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-1026
  • 2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-1026
  • 2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-1026
  • 2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-1026
  • 2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-1026

2-Piece Floating Front Brake Rotor Upgrade for Audi C8 RS6 & RS7

Part number: 034-301-1026

Not listed by the manufacturer for your selected vehicle: Audi RS3 8Y (2022-2024) 2.5 TFSI EVO

€2,034.82

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

420x40mm complete replacement brake rotor engineered to work with the factory front calipers on the Audi C8 RS6 & RS7. At roughly 45.3lbs per rotor, it sheds about 2.4lbs versus the factory 47.7lb rotor while retaining sufficient thermal mass in the ring and using 72 directionally curved vanes for strong airflow and heat dissipation. NVH Level: None-Low. Installation Effort: Mild.

Description

Product Description

This 420x40mm brake rotor is a complete replacement designed to work seamlessly with the factory front calipers on the Audi C8 RS6 & RS7. Upgrading the front rotors improves overall braking performance for street, track, and HPDE driving, keeping the brakes cool and strong throughout extended use.

Weighing approximately 45.3lbs, each rotor reduces rotational weight by about 2.4lbs per corner compared to the factory 47.7lb rotor. Despite the weight reduction, the rotor ring retains sufficient thermal mass to properly absorb heat, while 72 directionally curved vanes force cooling air through the rotor to dissipate heat effectively.

The central hat is machined from 6061-T6 aircraft-specification aluminum. The rotor ring is manufactured from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its form.

The friction face features J-slots that clean the pad and rotor surface of contaminants and allow hot pad outgassing, while reducing overall braking noise compared to traditionally slotted rotors.

The rotor and hat are connected via a floating mount system using high-strength alloy steel bobbins. These pins carry the braking load while allowing axial and radial float between the hat and disc, enabling safe expansion and contraction under heat.

Temperature-Indicating Paint Marks

Paint marks on the rotor edge provide a quick visual reference for heat exposure during aggressive street driving, autocross, or track use. The paint changes color at specific temperature thresholds:

  • Green → White at 478°C (892°F)
  • Orange → Yellow at 571°C (1060°F)
  • Red → White at 640°C (1184°F)

If the red paint turns white throughout, the rotors are consistently operating beyond their intended temperature range, which may indicate the need for lower-friction brake pads or improved cooling.

Comparison to Factory Rotor

FeatureStock C8 RS6/RS7 Rotor2-Piece Floating Rotor
Rotor DesignSemi-Floating 2-Piece RotorFloating 2-Piece Rotor
Internal Vane DesignNon-Directional Vanes72 Directional Curved Vanes
Cooling EfficiencyModerateVery High
Rotor MaterialOEM Cast IronCM-250 Special Alloy
Hat ConstructionIntegrated Iron Hat6061-T6 Aerospace Aluminum Hat
Weight24.7lb OE Rotor22.7lb Lightweight Rotor
Heat ResistanceGoodMaximum
Warping ResistanceModerateVery High
Friction Face DesignOEM Drilled FaceJ-Slotted Friction Face
Pad Degassing & Debris RemovalModerateExcellent
Floating HardwareNoYes – Floating Bobbin System
Replaceable Rotor RingsNoYes
Long-Term Maintenance CostHigher – full rotor replacementLower – ring replacement only
Street Driving✓✓✓✓✓
Spirited / Canyon Driving✓✓✓✓
Autocross / HPDELimited✓✓✓
Frequent Track UseNot IdealDesigned For It
Best ForDaily Driving & Occasional Spirited UseHigh-Performance Street & Track Driving

Features

  • Lightweight construction (approx. 22.7lb rotor vs. 24.7lb OE Audi rotor)
  • Floating, 2-piece design
  • 6061-T6 billet aluminum hats
  • Aerospace-grade aluminum hats
  • CM-250 special alloy rotor rings
  • J-slotted friction face
  • OEM fitment and functionality
  • Temperature-indicating paint marks on rotor edge:
    • Green changes to white at 478°C (892°F)
    • Orange changes to yellow at 571°C (1060°F)
    • Red changes to white at 640°C (1184°F)
      • If the red paint turns white throughout, the rotors are running too hot.
  • 72 curved vanes force cooling air through the rotor (OE rotors use non-directional vanes)
  • Floating bobbin mounting system
  • Replaceable rotor rings
  • Lower long-term maintenance cost

OE Part Interchange

  • 4K0 615 301 Q
  • 4K0 615 301 R
  • 4K0 615 301 S

What's Included

  • 420x40 Left Rotor
  • 420x40 Right Rotor
  • Installation and Break-In Instruction Sheet

Note: Type III hard anodizing of aluminum is a functional surface coating process. While color consistency is always the goal, slight variations may occur from batch to batch due to the nature of the anodizing process.

Diameter x Thickness
420 x 40 mm
Weight per Rotor
ca. 45,3 lbs / 20,5 kg
Weight Savings per Rotor
ca. 2,4 lbs / 1,1 kg gegenüber Serie (47,7 lbs)
Hat Material
6061-T6 Aluminium (Luftfahrtqualität)
Rotor Ring Material
CM-250 Speziallegierung
Cooling Vanes
72 gerichtete, gebogene Kühlrippen
Friction Face Design
J-Schlitze
Mounting System
Schwimmende Lagerung mit Stahl-Bolzen
Shipping weight
43.3 kg

–

  • 420x40 Left Rotor
  • 420x40 Right Rotor
  • Installation and Break-In Instruction Sheet
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products