Germany

← Back to catalogue

2-Piece Floating Rear Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-2026
  • 2-Piece Floating Rear Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-2026
  • 2-Piece Floating Rear Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-2026
  • 2-Piece Floating Rear Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-2026
  • 2-Piece Floating Rear Brake Rotor Upgrade for Audi C8 RS6 & RS7 034-301-2026

2-Piece Floating Rear Brake Rotor Upgrade for Audi C8 RS6 & RS7

Part number: 034-301-2026

Not listed by the manufacturer for your selected vehicle: BMW 2 Series F87 (2016-2021) S55 3.0L

€1,754.90

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

370x30mm floating 2-piece rear brake rotor serving as a direct replacement for the Audi C8 RS6 & RS7, engineered to work with the factory rear calipers. At roughly 22.7lbs per rotor, it cuts rotational weight by 2lbs per corner versus the 24.7lb factory rotor, while 72 directionally curved vanes drive effective cooling airflow. NVH level: none-low, installation effort: mild.

Description

Product Description

This 370x30mm 2-piece floating brake rotor is a complete replacement for the rear brake rotors on the Audi C8 RS6 & RS7, designed to work seamlessly with the factory rear calipers. Upgrading to these rotors increases braking performance in street, track, and HPDE driving conditions by keeping the brakes cool and effective during sustained use.

At roughly 22.7lbs, each rotor reduces rotational weight by 2lbs per corner compared to the 24.7lb factory rotor. Despite the weight reduction, the rotor ring retains sufficient thermal mass to properly absorb heat, while 72 directionally curved vanes force cool air through the rotor to aid heat dissipation.

The central hat is machined from 6061-T6 aircraft-specification aluminum. The rotor ring is produced from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its shape. From the factory, the same straight-vaned rotor design is used on both sides of the C8 RS6 & RS7 rear axle. These rotors instead use 72 directionally curved vanes to actively drive cooling air through the disc and are unique to the left and right sides, providing a significant increase in cooling efficiency over the factory design.

The friction face features J-slots that clear the pad surface of contaminants and allow hot pad outgassing, while producing less noise than a traditionally slotted rotor.

The hat and rotor ring are joined by a floating mount system using high-strength alloy steel bobbins. These pins carry the braking loads while allowing axial and radial float between the hat and disc, permitting safe expansion and contraction under heat.

Temperature-Indicating Paint Marks

The rotors feature paint marks on the rotor edge that change color at specific temperature thresholds, giving a quick visual reference for heat exposure during aggressive street driving, autocross, or track use:

  • Green → White at 478°C (892°F)
  • Orange → Yellow at 571°C (1060°F)
  • Red → White at 640°C (1184°F)

If the red paint turns white throughout, the rotors are consistently operating beyond their intended temperature range, which may indicate the need for lower-friction brake pads or improved cooling.

Comparison to Factory Rotor

FeatureStock C8 RS6/RS7 Rotor2-Piece Floating Rotor
Rotor DesignSemi-floating 2-pieceFloating 2-piece
Internal Vane DesignIncorrect directional vanes72 directional curved vanes
Cooling EfficiencyModerateVery high
Rotor MaterialOEM cast ironCM-250 special alloy
Hat ConstructionIntegrated iron hat6061-T6 aerospace aluminum hat
Weight24.7lb22.7lb
Heat ResistanceGoodMaximum
Warping ResistanceModerateVery high
Friction Face DesignOEM drilled faceJ-slotted friction face
Pad Degassing & Debris RemovalModerateExcellent
Floating HardwareNoYes – floating bobbin system
Replaceable Rotor RingsNoYes
Long-Term Maintenance CostHigher – full rotor replacementLower – replaceable ring only
Street DrivingSuitableWell suited
Spirited / Canyon DrivingLimitedWell suited
Autocross / HPDELimitedWell suited
Frequent Track UseNot idealDesigned for it
Best ForDaily driving & occasional spirited useHigh-performance street & track driving

Features

  • Lightweight construction: 22.7lbs vs. 24.7lb OE rotor
  • Floating, 2-piece design
  • 6061-T6 billet aerospace-grade aluminum hat
  • CM-250 special alloy rotor ring
  • J-slotted friction face
  • OEM fitment and functionality retained
  • Temperature-indicating paint marks on rotor edge:
    • Green changes to white at 478°C (892°F)
    • Orange changes to yellow at 571°C (1060°F)
    • Red changes to white at 640°C (1184°F)
      • If the red paint turns white throughout, the rotors are running too hot
  • 72 curved vanes force cooling air through the brake disc (OE rotors use incorrectly directed vanes)
  • Floating bobbin mounting system
  • Replaceable rotor rings
  • Lower long-term maintenance cost

OE Part Interchange

  • 4K0 615 601 A

Please note: Type III hard anodizing of aluminum is considered a functional surface coating process. While color consistency is always the goal, color variations may occur from batch to batch due to the nature of the anodizing process.

Diameter x Thickness
370 x 30 mm
Weight per Rotor
ca. 22,7 lbs
Hat Material
6061-T6 Aluminium
Rotor Ring Material
CM-250 Speziallegierung
Number of Cooling Vanes
72
Design
2-teilig, schwimmend gelagert
Shipping weight
23.1 kg

–

  • 370x30 left rotor
  • 370x30 right rotor
  • Installation and break-in instruction sheets
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products