2-Piece Floating Rear Brake Rotor Upgrade Kit for G20 BMW M340i & A90/A91 Toyota Supra
Part number: 034-301-2018
€1,268.11
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete 345x24mm rear brake rotor upgrade kit for the G20 BMW M340i and A90/A91 Toyota Supra. The 2-piece floating design works seamlessly with the factory rear calipers and uses 36 curved cooling vanes along with a lightweight construction to deliver increased thermal capacity for hard street and track driving.
Description
Product Description
The 345x24mm 2-piece floating rear brake rotor upgrade kit is designed to work seamlessly with the factory rear calipers found on the G20 BMW M340i and A90/A91 Toyota Supra.
Weighing approximately 16.9 lbs, the lightweight design retains proper thermal mass in the rotor rings to adequately capture heat, while 36 enhanced directionally curved vanes force cool air through the rotor to dissipate heat.
The central hat of the rotor is made from 6061-T6 aircraft-specification aluminum. The disc itself is constructed from a proprietary metal alloy capable of withstanding high braking temperatures while holding its form during hard street use and extended track sessions. The 36 directionally curved cooling vanes are profiled specifically to improve heat dissipation compared to the OE rotor vane design.
The rotor face features J-Slot slots, which increase braking surface area compared to drilled rotors, clean the pad and rotor surface of contaminants, and allow hot pad outgassing—all while reducing overall braking noise compared to traditional slotted rotors. This J-Slot design also improves upon OEM drilled rotors, which are prone to cracking after repeated abuse.
Thanks to its true 2-piece design, the rotor and hat are connected via a floating mount system using high-strength alloy steel bobbins. These pins carry the braking loads while allowing axial and radial float between hat and disc, enabling safe expansion and contraction from heat. The 2-piece design also reduces long-term repair costs, as only the rotor rings need to be replaced if worn.
These 2-piece rotors have been thoroughly tested in high-intensity motorsport events and are proven to significantly improve braking performance and thermal headroom, making them a suitable replacement rotor for the G20 BMW M340i or A90/A91 Toyota Supra in extreme street and track use.
Features
- Lightweight construction (16.9 lb rotor vs. 18.6 lb OE BMW rotor)
- Floating, 2-piece design
- Aerospace-grade aluminum hats
- CM-250 special alloy rotor rings
- J-slotted friction face
- OEM fitment and functionality
- 36 curved vanes force cooling air through the brake disc
- Floating bobbin mounting system
- Replaceable rotor rings
- Lower long-term maintenance cost
Please note: Type III hard anodizing of aluminum is a functional surface coating process. While color consistency is always targeted, slight color variations may occur from batch to batch due to the nature of the anodizing process.
NVH Level: None – Low
NVH measures how much noise, vibration, and harshness is transmitted into the vehicle cabin. Based on user feedback, these 2-piece brake rotors transfer none to low amounts of noise into the cabin. NVH levels are relative to the brake pad installed with the rotor—different pads produce different resonances when passing over the slots, which can sometimes result in a slight whirring noise. These sounds are a direct result of the braking performance improvements: the J-slots release gas from under the brake pad, and the high-density directional cooling vanes move substantial air, both of which produce audible air movement. Installation of other suspension components can also affect perceived NVH. Since NVH is subjective, actual experience may differ from the stated rating.
- Rotor Diameter
- 345 mm
- Rotor Thickness
- 24 mm
- Weight
- 16.9 lbs (~7.7 kg)
- Hat Material
- 6061-T6 Aluminium
- Rotor Ring Material
- CM-250 Speziallegierung
- Number of Cooling Vanes
- 36
- Design
- 2-teilig, schwimmend gelagert
- Friction Face
- J-Slot
- Shipping weight
- 18.8 kg
–
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ Sway Bar Kit, BMW F2X/F3X Chassis034-402-1024/25/34€399.19 – €895.713 variants
Motor Mount, Street Density, BMW F2X/F3X & F87 M2034-509-5040€284.78
Billet Aluminum Rear Differential Insert Kit, BMW F2X/F3X Chassis034-505-2026€139.96
Billet Aluminum Rear Subframe Insert Kit, BMW F2x/F3x Chassis034-601-0052€286.00






