84mm Throttle Body System, 4M Audi Q7 3.0TFSI
Part number: 034-108-1912
Not listed by the manufacturer for your selected vehicle: BMW 2 Series F2X (2014-2020) B48 2.0L
€864.07
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Throttle body upgrade for the supercharged 3.0 TFSI in the 4M Audi Q7, consisting of a VDO 84mm throttle body, a cast and machined aluminum adapter, and a silicone intake hose replacing the factory accordion hose. The system noticeably increases airflow over the stock throttle body and is designed to connect directly to the factory air box.
Description
Product Description
This throttle body system was developed to improve airflow beyond the factory throttle body on the supercharged 3.0 TFSI engine in the 4M Audi Q7. At its core is a VDO 84mm throttle body, mated to a cast and machined aluminum adapter that provides a smooth transition between the larger throttle body bore and the supercharger inlet.
The factory accordion throttle body inlet hose is replaced with an upgraded silicone hose, further reducing restriction in the intake path and altering supercharger sound. Testing showed a 39% increase in flow over the OE throttle body right out of the box. The throttle body adapter and gasket can also be port-matched to the supercharger during supercharger porting for additional airflow gains.
This kit is designed to connect directly to the factory air box. Testing showed that the OEM air filter already offers massive flow capability (over 2000 CFM, supporting roughly 1000hp), so an aftermarket filter provides no additional flow gain. For this reason, no aftermarket air filter is included, and use with the OEM air filter and air box is recommended.
Installation Effort
Installation is rated as MILD.
Required Software Calibration
Compatible Dynamic+ Tuning software is required to safely run this throttle body system. Files supporting this hardware are included with the tuning purchase for all supported stages and fuel octanes; simply select the file designated for this throttle body upgrade.
Before performing a throttle body alignment via the diagnostic toolbox (Toolbox → Engine → Throttle Body Alignment), ensure the following prerequisites are met:
- No stored faults in the ECU
- Battery voltage of at least 11.5 volts
- Throttle in resting/idle position (do not press the accelerator pedal)
- Throttle body clean and free of dirt and carbon deposits
- Coolant temperature between 5 and 95 degrees Celsius
Intake Hose Design
The silicone hose was developed using CAD software and 3D scanning technology to optimize the cross-sectional area within the factory space constraints, resulting in smooth transitions for optimal airflow to the throttle body.
Flow Comparison
| Configuration | Flow |
|---|---|
| OE | 448 CFM |
| Upgrade System | 620 CFM (+39%) |
Features
- Cast and machined A356 aluminum throttle body adapter
- Upgrade to a VDO 84mm throttle body
- Improved flow where the stock throttle body becomes restrictive
- Significant flow increase for upgraded throttle body, hose, and OE filter versus OE throttle body, hose, and filter
- OEM BMW V8 throttle body for reliability and long-lasting performance
- Smooth transition from the larger throttle body to the supercharger inlet
- Throttle body adapter and gasket can be port-matched to the supercharger during supercharger porting for additional flow
- Wire-reinforced, multi-ply silicone hose maintaining a smooth inside surface for optimal flow
- Nylon breather tube connection nipple
Notice
This product is intended for racing use and for vehicles not registered for on-highway use, and is not legal for use on highway or street vehicles.
- Throttle Body Diameter
- 84 mm
- Adapter Material
- A356-Aluminium, gegossen und gefräst
- OE Flow
- 448 CFM
- Upgrade Flow
- 620 CFM
- Flow Increase
- 39%
- Replaces OE Part Number
- 06E 129 616 D
- Shipping weight
- 3.2 kg
- 06E 129 616 D
- 84mm VDO throttle body
- Throttle body adapter
- Silicone hose
- Wiring harness adapter
- Adapter-to-supercharger gasket
- All necessary hardware
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Billet CREC Supercharger Clutch Delete Kit034-145-2019-STL/TI€284.78 – €840.952 variants
Handling Packages, 4M/4M.5 Q7/SQ7 & 4M8 Q8/SQ8034-4ZZ-0033/34/35/36€295.73 – €8,654.08100 variants
Motor Mount, Street Density, B9/B9.5 Audi S4/S5/SQ5 3.0 TFSI, RS4/RS5 2.9 TFSI, & 4M/4M.5 Q7 3.0 TFSI034-509-5041€584.16
2-Piece Floating Front Brake Rotor Upgrade Kit for Audi B9/B9.5 RS5 & 4M/4M.5 Q7/Q8034-301-1010€1,773.17
2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi C8 S6/S7, D5 A8/S8, & 4M/4M.5 Q7/SQ7/Q8/SQ8034-301-2014€1,209.69



