Adjustable MQB Solid Rear Sway Bar Upgrade for Audi RS3 8V/8V.5/8Y & Audi TTRS 8S
Part number: 034-402-1015
Not listed by the manufacturer for your selected vehicle: BMW 5 Series F90 (2017-2023) S63 4.4L
€453.94
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
This adjustable, solid rear sway bar for the 8V/8V.5/8Y Audi RS3 and 8S Audi TTRS noticeably improves handling dynamics and balance on these MQB-platform vehicles. Designed as a bolt-in replacement for the hollow factory rear sway bar, it significantly reduces body roll and understeer without compromising ride comfort. Machined from a single piece of solid spring steel, it is over 50% stiffer than the factory unit, allowing the car to corner flatter while remaining adjustable toward oversteer when desired. Maintenance-free, Teflon-lined bushings ensure quiet operation without regular greasing.
Description
Product Description
This adjustable, solid rear sway bar for the Audi 8V/8V.5/8Y RS3 and Audi 8S TTRS is machined from a single piece of high-quality spring steel measuring 0.938 inch in diameter for maximum rigidity. It is designed to counteract understeer while reducing body roll under hard cornering.
This component was extensively tested on the street and track using development vehicles (a 2018 Audi RS3 and a 2018 Audi TTRS) as well as multiple enthusiast-owned Audi MQB vehicles. It substantially reduces understeer and body roll on 8V Audi RS3 and 8S Audi TTRS vehicles without compromising on-street comfort.
The rear sway bar is engineered to work effectively alongside the stock front sway bar, meaning no front upgrade is required. While a stiffer front bar can improve turn-in feel, it tends to increase the platform's tendency to understeer. With the stock front bar paired with this upgraded rear bar, body roll is virtually eliminated while turn-in and off-throttle oversteer are greatly improved.
These sway bar kits feature maintenance-free polyurethane bushings with a Teflon and polyester liner, designed to improve sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also extends bushing service life. Since no additional lubrication is required, the bushings provide long-lasting, reliable performance without regular maintenance. They are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are backed by a limited lifetime warranty covering material cracking, separation of the Teflon liner from the polyurethane bushing, and squeaking under normal street or track conditions.
This RS3/TTRS-spec rear sway bar also fits the MK7/MK8 Volkswagen Golf R and the 8V/8Y Audi A3/S3, providing even greater body roll reduction and rigidity on those platforms.
Features
- Machined from high-quality, solid 0.938" diameter spring steel
- Two adjustment positions based on driver preference
- Black powdercoat finish for protection from the elements
- Billet CNC aluminum brackets with clear anodizing for corrosion protection
- Locating collars prevent side-to-side movement of the sway bar
- Greaseless, maintenance-free Teflon-lined polyurethane bushings
- Teflon and polyester composite liner virtually eliminates noise, vibration, and harshness (NVH)
- Improves sway bar response speed
- Extended service life
- No additional lubricant needed, and none should be added
- Hydrophobic and waterproof, unaffected even in the wettest environments
- Not chemically reactive, unaffected by common automotive chemicals
- Heat resistant, can operate continuously up to 500°F, well above typical operating temperatures
- Limited lifetime warranty covering manufacturing defects:
- Material cracking
- Separation of Teflon liner from polyurethane bushing
- Squeaking under normal street/track conditions
What's Included
- Adjustable solid rear sway bar for Audi 8V RS3 and Audi TTRS
- Teflon-lined polyurethane sway bar bushings
- Billet aluminum sway bar brackets
- Sway bar bracket installation hardware kit
Sway Bar Rate Data
- Soft setting: 81% rate increase vs. factory hollow Audi RS3/TTRS rear sway bar (21.7mm x 3.0mm)
- Stiff setting: 102% rate increase vs. factory hollow Audi RS3/TTRS rear sway bar (21.7mm x 3.0mm)
Recommended Alignment
The following alignment specifications were used for track driving on the RS3 development vehicle and are optimized for a very "loose" handling character with a lively rear end that tends toward oversteer. Caution should be exercised with these specs, as they can cause the car to over-rotate and spin, particularly during throttle-lift conditions while cornering:
- Front (Tires: 265/35-18 Michelin Sport Cup 2)
- Camber: -3.0 degrees each side (with 034-601-1013 camber mounts)
- Caster: 7.1 degrees (not adjustable)
- Toe: 0.6mm toe-in each side
- Rear (Tires: 245/40-18 Michelin Sport Cup 2)
- Camber: -1.5 degrees each side
- Toe: 0.8mm toe-in each side
The development vehicle was also equipped with front and rear sway bars and the complete spherical motorsport-line suspension components.
Installation Notes
For maximum effectiveness, we recommend also installing spherical MQB rear sway bar end links.
On lowered vehicles, always check clearances throughout the full range of suspension travel to identify possible interference. Using matched suspension components designed and tested to work together is recommended.
NVH Level: None to Low
NVH refers to the amount of noise, vibration, and harshness transmitted into the vehicle cabin. Based on user feedback, these sway bars transmit none to low amounts of NVH into the cabin. The sway bar bushings should be lubricated on average every six months for proper upkeep, or sooner if noise develops. As NVH perception is subjective, individual experiences may vary from this rating.
- Material
- Federstahl / Spring steel
- Diameter
- 23,8 mm (0,938")
- Bushing heat resistance
- bis 260 °C (500 °F)
- Rate increase (soft)
- 81% gegenüber Serie / vs. factory
- Rate increase (stiff)
- 102% gegenüber Serie / vs. factory
- Factory sway bar (reference)
- 21,7 mm x 3,0 mm, hohl / hollow
- Shipping weight
- 6.6 kg
–
Audi (14)
- A3 8V/8V.5 (2015-2020) 1.8 TFSI
- A3 8V/8V.5 (2015-2020) 2.0 TDI
- A3 8V/8V.5 (2015-2020) 2.0 TFSI
- RS3 8Y (2022-2024) 2.5 TFSI EVO
- RS3 8V.5 (2017-2020)
- RS3 8V.5 (2017-2020) 2.5 TFSI EVO
- RS3 8V (2015-2017) 2.5 TFSI
- RS3 8Y.5 (2025+) 2.5 TFSI
- S3 8V/8V.5 (2015-2020) 2.0 TFSI
- SQ2 MQB (2017-2021) 2.0T
- SQ2
- TT 8S (2016-2023) 2.0T Gen 3
- TTRS 8S (2016-2022) 2.5 TFSI EVO
- TTS 8S (2016-2023) 2.0T Gen 3
Seat (4)
Skoda (4)
Volkswagen (1)
- Adjustable solid rear sway bar for Audi 8V RS3 and Audi TTRS
- Teflon-lined polyurethane sway bar bushings
- Billet aluminum sway bar brackets
- Sway bar bracket installation hardware kit
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Res-X Racing Midpipes, 8V.5 Audi RS3 & 8S Audi TTRS034-105-7048€407.71
Billet Aluminum Rear Subframe Mount Inserts, Volkswagen & Audi MQB and MQB EVO AWD034-601-0032€187.43
Sway Bar End Link Pair, Motorsport, Front, Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-402-4002€399.19
Control Arm Pair, Density Line, Rear Upper Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-401-1053€608.49
Related products
Sway Bar Grease, 3oz034-911-0002€17.04
Grease Gun for Sway Bar Kits034-910-0014€40.16
Rebuild Kit, Adjustable Solid Rear Sway Bar, 0.9375"034-402-Z019€35.30
Sway Bar Teflon Bushing Rebuild & Upgrade Kit, 23.8mm Audi Rear034-402-Z065€36.51
Spherical Motorsport Rear Sway Bar End Links, Volkswagen & Audi MQB & MQB EVO034-402-4019€378.49



