Billet Aluminum Upper Dogbone Mount Insert, MkV/MkVI Volkswagen Golf/GTI/R/Jetta/GLI and 8P Audi A3/S3 & 8J Audi TT/TTS/TTRS
Part number: 034-509-1040
€48.68
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Upper dogbone mount insert (patent pending, US Design Patent D886,689 S) for MkV/MkVI Volkswagen Golf/GTI/R/Jetta/GLI as well as 8P Audi A3 and 8J Audi TT/TTS/TTRS, recommended for use with any dogbone mount and lower dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs with wheel-hop, places a bending moment on the dogbone mount arm that can bend or break it. This insert eliminates that bending force, allowing the dogbone mount to perform reliably even under extreme loads. NVH level: low to medium.
Description
The upper dogbone mount insert is recommended for all MkV/MkVI Volkswagen Golf/GTI/R/Jetta/GLI as well as 8P Audi A3 and 8J Audi TT/TTS/TTRS fitted with a dogbone mount and a lower dogbone mount insert. When using the OEM dogbone mount together with a lower insert, installation of the upper insert is strongly recommended.
Aggressive driving that causes violent drivetrain movement, such as burn-outs that induce wheel-hop, places a bending moment on the dogbone mount arm via the upper and lower dogbone mounts, causing the arm to bend and, in some cases, fail. When this failure occurs, the bottom of the engine is left unconstrained and can cause damage to surrounding components in the engine bay. The upper dogbone mount insert eliminates these bending forces, allowing the dogbone mount to perform as designed even during these violent events.
Kit Includes
- Upper Dogbone Mount Insert
- Lower Dogbone Mount Insert Spacer
Features
- CNC-machined upper insert from 6061 billet aluminum
- Clear anodized finish for corrosion resistance
- Water-jet cut aluminum lower insert spacer
- Spacer ensures upper and lower inserts don't touch or vibrate against each other
- Eliminates the bending moment in the dogbone mount arm
- Ensures even compression of upper and lower dogbone mount pucks
- Reduces wear on the lower dogbone mount puck
Combining a dogbone mount with a lower dogbone mount insert significantly improves drivetrain feel and responsiveness during spirited driving. However, this combination introduces forces on the dogbone mount arm that it was not originally designed to handle, and these forces have been known to break OEM dogbone mounts. While billet aluminum aftermarket dogbone mounts are considerably stronger than OEM parts and resist this bending force better, adding the upper insert removes the bending force entirely while evenly distributing load across both the upper and lower dogbone mount pucks, reducing excessive wear on the lower puck.
The lower dogbone mount insert limits compliance of the lower puck by filling large voids within it. During normal and spirited driving, this reduced compliance results in a more direct transitional response of the drivetrain to acceleration and deceleration forces, giving a more direct feel without introducing significant NVH.
However, violent drivetrain shocks, such as burn-out induced wheel-hop, introduce additional forces that can damage the dogbone mount arm. During these events, the lower puck's motion is limited by the lower insert, but the upper puck remains unconstrained and is free to move forward.
This allows the entire puck assembly to rotate forward toward the front of the vehicle. Because the dogbone mount arm is clamped into the puck assembly, this rotation generates a bending moment on the arm that it was not designed to withstand.
The billet upper dogbone mount insert was developed to address this issue. It fits into the front void of the upper dogbone mount puck, limiting the forward motion of the upper puck to match the limited motion of the lower puck when the lower insert is installed. Together, the upper and lower inserts eliminate rotation within the puck assembly during extreme drivetrain shocks, keeping forces on the dogbone arm aligned with its intended design direction. Subsequent testing showed no signs of bending or stress on the dogbone mount arm when both inserts were installed.
NVH Level: Low - Medium
NVH refers to the amount of noise, vibration, and harshness transmitted into the vehicle cabin. Based on user feedback, this insert transfers low to medium levels of NVH. No NVH is noticeable at idle, and some light NVH may occur on initial takeoff in drive or reverse. NVH perception is subjective, so experiences may vary. If NVH levels seem higher than expected, the installation should be checked to ensure no components are making unintended contact.
- Material (upper insert)
- 6061 Billet-Aluminium, CNC-gefertigt
- Finish
- Klar eloxiert
- Manufacturing (lower spacer)
- Wasserstrahlgeschnittenes Aluminium
- Shipping weight
- 0 kg
–
Audi (10)
Volkswagen (30)
- CC B7 (2009-2015) 2.0 TSI
- CC B7 (2009-2015) 3.6L VR6 FSI
- EOS Mk5 (2006-2016) 2.0 TSI
- EOS Mk5 (2006-2016) 2.0T FSI
- EOS Mk5 (2006-2016) 3.2L VR6 24V
- Golf R & R32 Mk6 Golf R (2012-2013)
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TDI
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TSI
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.5L
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0 TSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0T FSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.5L
- Jetta/GLI Mk6 (2011-2018) 1.4 TSI
- Jetta/GLI Mk6 (2011-2018) 1.8T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.0 TDI
- Jetta/GLI Mk6 (2011-2018) 2.0 TSI
- Jetta/GLI Mk6 (2011-2018) 2.0L 8V
- Jetta/GLI Mk6 (2011-2018) 2.0T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.5L
- Jetta/GLI Mk5 (2005-2010) 2.0 TDI
- Jetta/GLI Mk5 (2005-2010) 2.0 TSI
- Jetta/GLI Mk5 (2005-2010) 2.0T FSI
- Jetta/GLI Mk5 (2005-2010) 2.5L
- Passat B6 (2006-2010) 2.0 TSI
- Passat B6 (2006-2010) 2.0T FSI
- Passat B6 (2006-2010) 3.6L VR6 FSI
- Tiguan Mk1.5 (2012-2017) 2.0 TDI
- Tiguan Mk1.5 (2012-2017) 2.0 TSI
- Tiguan Mk1 (2009-2011) 2.0 TDI
- Tiguan Mk1 (2009-2011) 2.0 TSI
- Upper Dogbone Mount Insert
- Lower Dogbone Mount Insert Spacer
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com







