Billet Aluminum Upper Dogbone Mount Insert, Volkswagen & Audi MQB and MQB EVO
Part number: 034-509-1035
Not listed by the manufacturer for your selected vehicle: Volkswagen Passat B6 (2006-2010) 3.6L VR6 FSI
€55.98
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
This upper dogbone mount insert is required when running an aftermarket dogbone mount together with a lower dogbone mount insert on Volkswagen & Audi MQB and MQB EVO vehicles. It prevents bending forces from acting on the dogbone mount arm during violent drivetrain events such as burn-out induced wheel-hop, which can otherwise cause the arm to bend or fail. This insert is now included as standard in every spherical MQB dogbone mount we sell.
Description
Function and Background
The upper dogbone mount insert is required for Volkswagen and Audi vehicles built on the MQB and MQB EVO platforms when an aftermarket dogbone mount is used together with a lower dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs that induce wheel-hop, causes the upper and lower dogbone mount pucks to exert a bending moment on the dogbone mount arm, which can bend or fail the arm. When this failure occurs, the bottom of the engine is left unconstrained, and the engine can cause damage to other components in the engine bay. The upper dogbone mount insert eliminates these bending forces, allowing the dogbone mount to perform as designed during these violent events.
An aftermarket billet spherical dogbone mount combined with a dogbone mount insert dramatically improves the feel and responsiveness of the drivetrain during spirited driving. However, this combination of modifications, coupled with the design constraints of the MQB dogbone mount pucks, reveals a scenario that applies forces to the dogbone mount arm that it was not designed for.
The lower dogbone mount insert limits compliance of the lower dogbone mount puck by filling large voids in the puck. During normal and spirited driving, this reduction in compliance results in a more direct transitional response of the drivetrain to accelerative and decelerative forces. The driver feels more direct throttle response through the drivetrain without introducing a significant amount of NVH.
However, violent drivetrain shocks, such as burn-out induced wheel-hop, introduce additional forces that can cause damage to the billet spherical dogbone mount arm. In these violent events, the lower puck motion is limited by the dogbone insert, but the upper puck is unconstrained and free to move forward.
This means the entire puck assembly rotates forward at an angle towards the front of the car. Because the dogbone mount arm is clamped into the puck assembly, this rotation generates a bending moment on the dogbone mount arm that it was not designed for.
Testing has shown that regardless of arm design and material used, the arm cannot be made strong enough to withstand this bending moment. Arms manufactured from 6061 aluminum, 7075 aluminum, and stainless steel were tested, with very similar results across all materials. The dogbone mount arm showed signs of bending after just two burn-out induced wheel-hop events, with complete failure occurring in as few as four events. Other brands' spherical dogbone mounts are expected to show similar failure patterns.
Based on this testing, the Billet Upper Dogbone Mount Insert was developed to resolve the issue. The insert fits into the front void of the upper dogbone mount puck, limiting the forward motion of the upper puck to match the limited forward motion of the lower puck when the lower insert is installed. Together, the upper and lower inserts eliminate rotation inside the puck assembly during extreme drivetrain shocks, keeping the forces acting on the dogbone arm in the direction it was designed for. Subsequent testing with both inserts installed showed no signs of bending or stress in the dogbone mount arm.
- Shipping weight
- 0 kg
–
Audi (7)
Seat (1)
Volkswagen (8)
- Golf R & R32 Mk8 (2022-2024)
- Golf R & R32 Mk7/Mk7.5 Golf R (2015-2019)
- Golf R & R32 Mk8.5 (2025+)
- Golf/GTI/Rabbit Mk8 (2022-2024) 2.0T Gen 4
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 1.8T Gen3
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0 TDI
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0T Gen3
- Golf/GTI/Rabbit Mk8.5 (2025+) 2.0 TFSI
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com





