Billet Spherical Dogbone Mount Performance Pack with Dogbone Pucks, Volkswagen & Audi MQB and MQB EVO with 7-Speed DSG
Part number: 034-509-1045
Fits your vehicle: Volkswagen Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0 TDI
€578.08
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete package covering the dogbone mount for Volkswagen & Audi MQB and MQB EVO models with 7-speed DSG. Includes the billet spherical dogbone mount, upper and lower dogbone mount inserts, dogbone mount pucks, and all new hardware.
Description
Product Description
This performance pack bundles all components related to the dogbone mount for Volkswagen & Audi MQB and MQB EVO models equipped with a 7-speed DSG transmission. Included in the kit are the billet spherical dogbone mount, the upper dogbone mount insert, the lower dogbone mount insert, the dogbone mount pucks, and all new hardware.
NVH Level: Medium
NVH describes the amount of noise, vibration, and harshness transmitted into the cabin of the vehicle. Based on user feedback, this performance pack transfers a medium level of NVH into the cabin. Changes in NVH may be more noticeable on vehicles equipped with DSG or Tiptronic transmissions, or if the factory engine/transmission mounts are already worn or damaged. A break-in period of at least 250 miles is recommended for the Street Density mounts. NVH perception is subjective and may vary between users.
Note: Combining this product with motor or transmission mounts from other manufacturers may void the warranty.
Billet Aluminum Spherical Dogbone Mount
This dogbone mount was engineered with performance and durability as top priorities. Manufactured from billet aluminum and stainless steel, it features a high-quality spherical bearing with self-lubricating Teflon race lining that maintains proper articulation and reduces NVH transfer. Machined and assembled in-house, it is designed to eliminate the slop associated with the factory mount and better withstand the forces generated by hard launches.
The result is a locked-down drivetrain, crisper shifting, and virtually no wheel hop. This mount will cause some increase in noise, vibration, and harshness inside the cabin.
Billet Spherical Dogbone Mount Features:
- Bolt-in performance upgrade for the factory dogbone mount
- Reduced drivetrain slop and engine movement under load
- More direct power transfer and improved shifting feel
- Increased strength and improved durability versus the factory part
- T6-6061 billet aluminum body
- 303 stainless steel spacers
- High-quality spherical bearing with self-lubricating Teflon race lining
- Rebuildable design
- New factory stretch bolts included
Street Density Dogbone Mount Puck Pair
This dogbone mount puck pair for Volkswagen & Audi MQB and MQB EVO models is manufactured from high-durometer rubber for increased performance and durability. The pair uses 65 durometer rubber, compared to 55 durometer on the factory part, and features a steel thread insert in the upper mount for increased resistance to stripping threads compared to the factory aluminum insert.
This upgrade is compatible with the full line of MQB drivetrain upgrades and offers decreased drivetrain movement, crisper shifting, and reduced wheel hop, with only a minimal noticeable increase in NVH inside the cabin. NVH changes may be more noticeable on vehicles equipped with DSG or Tiptronic transmissions, or if the factory engine/transmission mounts are worn or failed. A break-in period of at least 250 miles after installation is recommended.
Street Density Dogbone Mount Puck Features:
- Complete drop-in replacement of the factory mounts
- Compatible with the Version 1 lower dogbone mount insert, upper insert, and spherical dogbone mount
- Manufactured from 65 durometer rubber
- Upgraded steel thread insert in the upper mount replacing the factory aluminum insert, which is prone to stripping
- Reduced drivetrain movement
- Decreased engine movement under load
- More direct power transfer
- Improved shifting feel
- Sold as a pair
High-Durometer Rubber versus Polyurethane:
Density Line mounts are manufactured from high-durometer rubber rather than polyurethane. Although vulcanized rubber mounts are more complex and costly to tool and prototype, rubber is inherently a better damping medium for mounts and bushings.
Rubber handles stress under both tension and compression, while polyurethane mounts rely on the damping medium being effective only under compression. Rubber also performs well in shear, where polyurethane is ineffective, making it well suited to control arm bushings subjected to shear forces during articulation.
Unlike polyurethane, rubber does not pack and wear over time, resulting in a long-lasting part with consistent performance and ride comfort.
Billet Aluminum Lower Dogbone Mount Insert
This precision-machined billet aluminum insert fills the large voids in the factory dogbone mount, limiting transmission and engine movement without sacrificing ride quality or introducing noticeable additional NVH into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and delivers crisper shifts along with a more direct, connected driving experience.
Engineered to work together with the factory rubber mount, this insert was designed using CAD software and thoroughly tested to provide noticeable slop reduction without introducing excessive noise or vibration into the cabin, a common shortcoming of lesser designs. Unlike polyurethane insert options on the market, this billet aluminum part will not pack and wear over time, ensuring long-lasting performance.
Billet Aluminum Lower Dogbone Mount Insert Features:
- T6-6061 billet aluminum construction
- Clear anodized finish for durability
- Engineered to fill the void in the factory transmission mount
- Drastically reduces transmission movement during shifting and deceleration
- Improves shifting feel, resulting in crisper shifts
- Virtually no additional NVH transfer into the cabin
- Easy, straightforward installation
Billet Aluminum Upper Dogbone Mount Insert
The upper dogbone mount insert (patent pending) is required on Volkswagen & Audi MQB and MQB EVO vehicles whenever an aftermarket dogbone mount is used together with a lower dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs inducing wheel hop, exerts a bending moment on the dogbone mount arm from the upper and lower pucks, causing it to bend and, in some cases, fail. When this failure occurs, the bottom of the engine is left unconstrained, and the engine can cause damage to other components in the engine bay. The upper dogbone mount insert eliminates these bending forces, allowing the dogbone mount to perform as designed during these violent events.
An aftermarket billet spherical dogbone mount combined with a lower dogbone mount insert dramatically improves the feel and responsiveness of the drivetrain during spirited driving. However, this combination of modifications, together with the design constraints of the MQB dogbone mount pucks, creates a scenario that applies forces to the dogbone mount arm that it was not originally designed for.
The lower dogbone mount insert limits compliance of the lower dogbone mount puck by filling its large voids. During normal and spirited driving, this reduced compliance results in a more direct transitional response of the drivetrain to accelerative and decelerative forces, giving the driver more direct throttle response without introducing significant additional NVH.
However, violent drivetrain shocks, such as burn-out induced wheel hop, introduce additional forces that can damage the billet spherical dogbone mount arm. In these violent events, the lower puck's motion is limited by the lower insert, but the upper puck remains unconstrained and is free to move forward.
This causes the entire puck assembly to rotate forward at an angle toward the front of the car. Because the dogbone mount arm is clamped into the puck assembly, this rotation generates a bending moment on the arm that it was not designed to withstand.
Testing has shown that, regardless of arm design or material used, the arm cannot be made strong enough to withstand this bending moment. Arms manufactured from 6061 aluminum, 7075 aluminum, and stainless steel were all tested, with similar results across the board. The dogbone mount arm showed signs of bending after just two burn-out induced wheel hop events, with complete failure occurring in as few as four events. Spherical dogbone mounts from other manufacturers are expected to experience similar failures.
This testing revealed the cause of the bending and led to the development of the upper dogbone mount insert. This insert slips into the front void of the upper dogbone mount puck, limiting the forward motion of the upper puck to match the limited forward motion of the lower puck when the lower insert is installed. The result is an upper and lower insert combination that eliminates rotation within the puck assembly during extreme drivetrain shocks, keeping the forces acting on the dogbone arm aligned with its intended design direction. Subsequent testing showed no signs of bending or stress on the dogbone mount arm with both inserts installed.
Billet Upper Dogbone Mount Insert Features:
- T6-6061 billet aluminum construction
- Clear anodized finish for durability
- Prevents the lower insert from bending
- Prevents the billet dogbone arm from bending
- Engineered to fill the upper void in the factory transmission mount
- Drastically reduces transmission movement during shifting and deceleration
- Improves shifting feel, resulting in crisper shifts
- Virtually no additional NVH transfer into the cabin
- Easy, straightforward installation
- Dogbone Mount Material
- T6-6061 Billet-Aluminium / 303 Edelstahl-Distanzstücke
- Bearing Type
- Kugelgelenk mit selbstschmierender Teflon-Laufbuchse
- Insert Material (Upper/Lower)
- T6-6061 Billet-Aluminium, klar eloxiert
- Puck Durometer
- 65 Shore (Serie: 55 Shore)
- Upper Puck Thread Insert
- Stahl (ersetzt Serien-Aluminium)
- NVH Level
- Mittel
- Shipping weight
- 1.8 kg
–
Audi (7)
Seat (1)
Volkswagen (8)
- Golf R & R32 Mk8 (2022-2024)
- Golf R & R32 Mk7/Mk7.5 Golf R (2015-2019)
- Golf R & R32 Mk8.5 (2025+)
- Golf/GTI/Rabbit Mk8 (2022-2024) 2.0T Gen 4
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 1.8T Gen3
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0 TDI
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0T Gen3
- Golf/GTI/Rabbit Mk8.5 (2025+) 2.0 TFSI
- Billet Spherical Dogbone Mount
- Upper Dogbone Mount Insert (billet aluminum)
- Lower Dogbone Mount Insert (billet aluminum)
- Dogbone Mount Puck Pair
- All new hardware
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Motorsport Stainless Steel Tow Hook - 105mm for Audi MQB/B8/B8.5/B9 and Volkswagen MQB034-605-0008€237.32
Turbo Muffler Delete with Test Ports, Volkswagen & Audi EA888.3 1.8T/2.0T 4 Cylinder Engines034-145-Z040€170.38
Dynamic+ Camber Mount Pair, Volkswagen & Audi MQB and MQB EVO034-601-1013€516.01
MQB Front Subframe Locking Collar Upgrade Kit, 8V/8V.5/8S Audi A3/S3/RS3 & TT/TTS/TTRS, Stainless Steel034-601-0028€193.51















