Billet Spherical Dogbone Mount Performance Pack Without Dogbone Pucks, Volkswagen & Audi MQB and MQB EVO with Manual OR 6-Speed DSG
Part number: 034-509-1042-1/2Bundle
Fits your vehicle: Volkswagen Golf/GTI/Rabbit Mk8 (2022-2024) 2.0T Gen 4
€467.32 – €468.55
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
This Performance Pack for the dogbone mount on Volkswagen & Audi MQB and MQB EVO vehicles with manual transmission or 6-speed DSG bundles all associated components into one kit. Included are the Billet Spherical Dogbone Mount, the Upper and Lower Dogbone Mount Inserts (Version 1 or Version 2, depending on the shape of the factory dogbone pucks), and all new mounting hardware. This version is supplied without dogbone pucks.
| Version | Part number | Price |
|---|---|---|
| Version 1 | 034-509-1042-1/2: 034-509-1042-1 | €468.55 |
| Version 2 | 034-509-1042-1/2: 034-509-1042-2 | €467.32 |
Description
Product Description
This Performance Pack bundles all components associated with the dogbone mount for Volkswagen & Audi MQB and MQB EVO vehicles equipped with a manual transmission or 6-speed DSG into one comprehensive kit. Included are the Billet Spherical Dogbone Mount, an Upper Dogbone Mount Insert, and a Lower Dogbone Mount Insert (Version 1 or Version 2, depending on the shape of the factory dogbone pucks), along with all new installation hardware. Dogbone pucks themselves are not included in this version.
Select the Correct Version
Some Mk7/Mk7.5 GTI/Golf R and 8V/8V.5 A3/S3 models are equipped with a different factory dogbone mount. Before ordering, visually verify which mount is installed on the vehicle to determine the correct insert version.
NVH Level: Low to Medium
NVH refers to the amount of noise, vibration, and harshness transmitted into the cabin. Based on user feedback, the dogbone inserts and spherical dogbone mount transmit low to medium NVH levels. No NVH is generated at idle, and some light NVH may be noticeable on initial take-off in drive or reverse. NVH perception is subjective and may vary by vehicle. If NVH levels seem excessive, check the installation for component contact.
Billet Aluminum Spherical Dogbone Mount
This dogbone mount was engineered for performance and durability, manufactured from billet aluminum and stainless steel. It features a high-quality spherical bearing with a self-lubricating Teflon race lining that maintains proper articulation and reduces NVH transfer. Machined and assembled in-house, it eliminates the slop associated with the factory mount and withstands the forces generated by hard launches more effectively.
The result is a locked-down drivetrain, crisper shifting, and virtually no wheel hop. Some increase in NVH compared to the factory mount should be expected.
- Bolt-in performance upgrade for the factory dogbone mount
- Reduced drivetrain slop and engine movement under load
- More direct power transfer and improved shifting feel
- Increased strength and durability versus the factory part
- T6-6061 billet aluminum body
- 303 stainless steel spacers
- High-quality spherical bearing with self-lubricating Teflon race lining
- Rebuildable design
- New factory stretch bolts included
Billet Aluminum Lower Dogbone Mount Insert
This precision-machined billet aluminum insert fills the large voids in the factory dogbone mount, limiting transmission and engine movement without sacrificing ride quality or introducing noticeable additional NVH. By filling the void in the factory mount, this insert eliminates the associated slop and provides crisper shifts and a more direct, connected driving experience.
Designed using CAD software and thoroughly tested to work with the factory rubber mount, it provides noticeable slop reduction without introducing excessive noise or vibration, unlike some lesser designs. Unlike polyurethane inserts, this billet aluminum part does not pack or wear over time.
Select the Correct Version. Some Mk7 GTI & Golf R models are equipped with a different factory dogbone mount. Visually verify the installed mount before ordering to determine the correct insert version.
- T6-6061 billet aluminum construction
- Clear anodized finish for durability
- Engineered to fill the void in the factory transmission mount
- Drastically reduces transmission movement during shifting and deceleration
- Improves shifting feel, resulting in crisper shifts
- Virtually no additional NVH transfer inside the cabin
- Easy, straightforward installation takes minutes
Billet Aluminum Upper Dogbone Mount Insert
This insert (patent pending) is required for any Volkswagen & Audi MQB and MQB EVO vehicle using an aftermarket dogbone mount together with a lower dogbone mount insert. Aggressive driving causing violent drivetrain movement, such as burn-outs that induce wheel hop, causes the upper and lower dogbone mounts to exert a bending moment on the dogbone mount arm, which can bend or, in some cases, fail. When this occurs, the bottom of the engine becomes unconstrained and can damage other components in the engine bay. The upper insert eliminates these bending forces, allowing the dogbone mount to perform as designed during such events.
An aftermarket billet spherical dogbone mount combined with a dogbone mount insert dramatically improves drivetrain feel and responsiveness during spirited driving. However, this combination, together with the design constraints of the MQB dogbone mount pucks, creates forces on the dogbone mount arm that it was not originally designed for.
The lower dogbone mount insert limits compliance of the lower puck by filling its large voids, resulting in a more direct transitional response to acceleration and deceleration forces without introducing significant NVH.
However, violent drivetrain shocks, such as burn-out-induced wheel hop, introduce additional forces that can damage the billet spherical dogbone mount arm. In these events, the lower puck's motion is limited by the lower insert, while the upper puck remains unconstrained and free to move forward.
This causes the entire puck assembly to rotate forward toward the front of the car. Because the dogbone mount arm is clamped into the puck assembly, this rotation generates a bending moment on the arm that it was not designed to withstand.
Testing has shown that regardless of arm design or material, the arm cannot be made strong enough to withstand this bending moment. Arms manufactured from 6061 aluminum, 7075 aluminum, and stainless steel were tested, with similar results across all materials. Dogbone mount arms showed signs of bending after as few as two burn-out-induced wheel hop events, with complete failure occurring after as few as four events. Other brands' spherical dogbone mounts are expected to experience similar failures.
This testing revealed the root cause of the bending, leading to the development of the upper dogbone mount insert. This insert fits into the front void of the upper dogbone mount puck, limiting its forward motion to match the limited motion of the lower puck when the lower insert is installed. Together, the upper and lower inserts eliminate rotation within the puck assembly during extreme drivetrain shocks, keeping forces on the dogbone arm aligned with its intended design direction. Subsequent testing showed no signs of bending or stress on the dogbone mount arm when both inserts were installed.
- T6-6061 billet aluminum construction
- Clear anodized finish for durability
- Prevents the lower insert from bending
- Prevents the billet dogbone arm from bending
- Engineered to fill the upper void in the factory transmission mount
- Drastically reduces transmission movement during shifting and deceleration
- Improves shifting feel, resulting in crisper shifts
- Virtually no additional NVH transfer inside the cabin
- Easy, straightforward installation takes minutes
Note
Products installed together with BFI motor or transmission mount products will not qualify for warranty.
- Dogbone Mount Body Material
- T6-6061 Billet-Aluminium / T6-6061 Billet Aluminum
- Spacer Material
- 303 Edelstahl / 303 Stainless Steel
- Bearing Type
- Kugelgelenklager mit selbstschmierender Teflon-Laufbuchse / Spherical bearing with self-lubricating Teflon race lining
- Insert Material (Upper/Lower)
- T6-6061 Billet-Aluminium, klar eloxiert / T6-6061 Billet Aluminum, clear anodized
- NVH Level
- Niedrig bis Mittel / Low to Medium
–
Audi (7)
Seat (1)
Volkswagen (8)
- Golf R & R32 Mk8 (2022-2024)
- Golf R & R32 Mk7/Mk7.5 Golf R (2015-2019)
- Golf R & R32 Mk8.5 (2025+)
- Golf/GTI/Rabbit Mk8 (2022-2024) 2.0T Gen 4
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 1.8T Gen3
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0 TDI
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0T Gen3
- Golf/GTI/Rabbit Mk8.5 (2025+) 2.0 TFSI
- Billet Spherical Dogbone Mount
- Upper Dogbone Mount Insert
- Lower Dogbone Mount Insert (Version 1 or Version 2)
- All new mounting hardware including factory stretch bolts
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Motorsport Stainless Steel Tow Hook - 105mm for Audi MQB/B8/B8.5/B9 and Volkswagen MQB034-605-0008€237.32
Turbo Muffler Delete with Test Ports, Volkswagen & Audi EA888.3 1.8T/2.0T 4 Cylinder Engines034-145-Z040€170.38
Dynamic+ Camber Mount Pair, Volkswagen & Audi MQB and MQB EVO034-601-1013€516.01
Res-X Resonator Delete, MkVII Volkswagen GTI & 8V Audi A3 FWD034-105-7043€264.08
MQB Front Subframe Locking Collar Upgrade Kit, 8V/8V.5/8S Audi A3/S3/RS3 & TT/TTS/TTRS, Stainless Steel034-601-0028€193.51















