Density Line Bump Stops, Front, 38mm
Part number: 034-403-Z005
€18.25
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Density Line Bump Stops restore the suspension travel lost when a vehicle is lowered. They provide a tuned, progressive compression characteristic that factory or trimmed bump stops cannot match, improving both handling and ride comfort.
Description
Engineered Travel. Tuned Control. Superior Comfort.
Lowering a vehicle commonly reduces usable suspension travel. When the suspension reaches its limit sooner than intended, handling precision, ride comfort, and consistent tire contact all suffer. Density Line Bump Stops restore this lost travel by providing additional, carefully tuned suspension support. Their progressive compression characteristic manages impact forces smoothly, offering control that factory or trimmed bump stops cannot deliver. The result is a more composed and predictable driving experience, particularly on lowered setups that require proper suspension geometry and travel management.
Why Suspension Travel Matters
Lowered vehicles lose usable suspension travel, causing the suspension to reach the factory bump stop much sooner than intended. A bump stop is designed by the OEM as a final-stage buffer, a rubber cushion that protects the shock and suspension components from bottoming out during extreme compression. At stock ride height, it engages only during hard impacts, serving as a safety and comfort device rather than a primary spring.
When the vehicle is lowered, that engineered clearance is reduced or eliminated. The shock then engages the OEM bump stop far more often and under lighter loads than originally intended, turning it into an unintended secondary spring. This restricts suspension movement, reduces the suspension's ability to absorb bumps, and prevents the tire from maintaining consistent load, leading to a noticeable loss of ride quality, grip, and handling precision.
| Lowered on OEM Bump Stops | Lowered on Density Line Bump Stops |
|---|---|
Factory bump stops were never engineered for lowered ride heights, and cutting them only amplifies harshness. |
Result: A poised, controlled suspension that maintains grip and comfort instead of bottoming out. |
Precision-Tuned Compression Rate
Factory bump stops are designed for stock ride heights and spring rates, which often falls short on a lowered vehicle. Density Line Bump Stops are specifically engineered for lowered setups, particularly those running Dynamic+ Lowering Springs. Each bump stop is shaped, sized, and density-matched to provide a progressive compression profile that acts like a miniature spring and damper, allowing smooth, comfortable early travel while increasing firmness as the suspension approaches full compression. The result is controlled body motion, predictable handling, and improved ride quality without harshness.
Platform-Specific Engineering
Every Density Line Bump Stop is designed to match its specific chassis for optimal suspension performance. Vehicle-specific shapes and lengths restore suspension geometry and travel to near-factory levels, even after lowering. Compression rate and progression are tuned to complement Dynamic+ Lowering Springs, maintaining handling balance while providing consistent, predictable performance. The optimized length and compression characteristics ensure the bump stop works seamlessly with the rest of the suspension as part of a fully engineered package rather than a generic replacement.
Why Not Just Cut the Factory Bump Stop?
Cutting factory bump stops may seem like an easy fix and has been a common practice for years, but it comes at a cost. Trimming may add some travel, but it removes the carefully tuned final phase of suspension travel that keeps the suspension controlled and the ride composed, resulting in harsh bottom-outs, unpredictable handling, and a setup that never feels quite right.
Density Line Bump Stops offer a properly engineered alternative. Designed from the ground up for lowered vehicles, they provide the full range of motion the suspension needs, with smooth, progressive control that cut OEM stops cannot match: more travel, more precision, no compromises.
| Cut Factory Bump Stops | Density Line Bump Stops |
|---|---|
|
|
Features
- Designed for lowered vehicles
- Improve handling and comfort
- Ideal complement to Dynamic+ Lowering Springs
- Made from OEM-quality PUR (polyurethane) material
- Reduced height helps maintain full suspension movement on lowered vehicles:
- OE height: 55mm
- Height: 38mm
- Increased durometer over OE for more effective compression limiting without becoming overly harsh:
- OE: 50A
- Density Line: 55A
Part Number Interchange
- 1K0 412 303 F
- Material
- Polyurethan (PUR), OEM-Qualität
- Height (OE)
- 55 mm
- Height (Density Line)
- 38 mm
- Durometer (OE)
- 50A
- Durometer (Density Line)
- 55A
- Shipping weight
- 0.5 kg
–
Audi (8)
Volkswagen (26)
- CC B7 (2009-2015) 2.0 TSI
- CC B7 (2009-2015) 3.6L VR6 FSI
- E-Golf Mk7/Mk7.5 (2015-2020) E-Golf
- Golf R & R32 Mk8 (2022-2024)
- Golf R & R32 Mk7/Mk7.5 Golf R (2015-2019)
- Golf R & R32 Mk6 Golf R (2012-2013)
- Golf R & R32 Mk8.5 (2025+)
- Golf/GTI/Rabbit Mk8 (2022-2024) 2.0T Gen 4
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0T Gen3
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0 TSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0T FSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.5L
- Golf/GTI/Rabbit Mk8.5 (2025+) 2.0 TFSI
- Jetta/GLI Mk6 (2011-2018) 1.4 TSI
- Jetta/GLI Mk6 (2011-2018) 1.8T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.0 TDI
- Jetta/GLI Mk6 (2011-2018) 2.0 TSI
- Jetta/GLI Mk6 (2011-2018) 2.0L 8V
- Jetta/GLI Mk6 (2011-2018) 2.0T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.5L
- Jetta/GLI Mk5 (2005-2010) 2.0 TDI
- Jetta/GLI Mk5 (2005-2010) 2.5L
- Passat B6 (2006-2010) 2.0 TSI
- Passat B6 (2006-2010) 2.0T FSI
- Passat B6 (2006-2010) 3.6L VR6 FSI
- 1 Pair of Bump Stops
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ Lowering Springs for MK8 Volkswagen Golf R034-404-1021€396.73
Dynamic+ Lowering Springs for MkVII Volkswagen Golf R034-404-1004€396.73
Dynamic+ Lowering Springs for MK5 Volkswagen GTI 2.0T034-404-1028€303.03
Dynamic+ Lowering Springs For 8Y Audi RS3034-404-1035€451.51
Dynamic+ Lowering Springs for 8S Audi TT RS034-404-1006€456.38



