Density Line Bump Stops, Rear, 100mm
Part number: 034-403-Z009
€23.12
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Density Line Bump Stops restore the suspension travel lost when a vehicle is lowered. They provide additional, progressively tuned support that offsets the handling and comfort drawbacks of lowered setups, something factory or trimmed bump stops cannot achieve.
Description
Engineered Travel, Tuned Control, Superior Comfort
Density Line Bump Stops address one of the most common issues that comes with lowering a vehicle: the loss of usable suspension travel. When the suspension runs out of room to move, handling precision, ride comfort, and consistent tire contact all begin to suffer. These bump stops restore that performance by providing additional, carefully tuned suspension support. Their progressive characteristics manage impact forces smoothly, offering control that factory or trimmed bump stops cannot deliver, resulting in a more composed and predictable driving experience on lowered setups.
Why Suspension Travel Matters
Lowered vehicles lose valuable suspension travel, causing the suspension to reach the factory bump stop much sooner than intended. A bump stop is designed by the OEM as a final-stage buffer, a rubber cushion that protects the shock and suspension components from bottoming out during extreme compression. At stock height, it is meant to engage only during hard impacts, serving as a safety and comfort device rather than a primary spring.
When the vehicle is lowered, that engineered clearance is reduced or eliminated. The shock engages the OEM bump stop far more often and under lighter loads than originally intended, turning the bump stop into an unintended secondary spring. This restricts suspension movement, reduces the suspension's ability to absorb bumps, and prevents the tire from maintaining consistent load, resulting in a noticeable loss of ride quality, grip, and handling precision.
| Lowered on OEM Bump Stops | Lowered on Density Line Bump Stops |
|---|---|
|
|
Result: a poised, controlled suspension that maintains grip and comfort instead of bottoming out.
Precision-Tuned Compression Rate
Factory bump stops are designed for stock ride heights and spring rates, which means they often fall short when a vehicle is lowered. Density Line Bump Stops are specifically engineered for lowered setups, particularly those running Dynamic+ Lowering Springs. Each bump stop is carefully shaped, sized, and density-matched to provide a progressive compression profile that acts like a miniature spring and damper, allowing smooth, comfortable early travel while increasing firmness as the suspension approaches full compression. The result is controlled body motion, predictable handling, and improved ride quality without harshness.
Platform-Specific Engineering
Every Density Line Bump Stop is designed to match its specific chassis, ensuring optimal suspension performance. By utilizing vehicle-specific shapes and lengths, these bump stops restore suspension geometry and travel to near-factory levels, even after lowering. Their compression rate and progression are tuned to complement Dynamic+ Lowering Springs, maintaining handling balance while providing consistent, predictable performance. The optimized length and compression characteristics ensure the bump stop works seamlessly with the rest of the suspension, completing a fully engineered performance package rather than serving as a generic replacement.
Why Not Just Cut the Factory Bump Stop?
Cutting factory bump stops might seem like an easy fix, and people have been doing it for years. But every shortcut has a cost. Trimming might buy a little travel, but it ruins the last phase of the carefully tuned suspension travel that keeps the suspension controlled and the ride composed. The result is harsh bottom-outs, unpredictable handling, and a setup that never feels quite right.
Density Line Bump Stops are designed from the ground up for lowered vehicles, delivering the full range of motion the suspension deserves, with smooth, progressive control that cut OEM stops cannot match. More travel, more precision, no compromises.
| Cut Factory Bump Stops | Density Line Bump Stops |
|---|---|
|
|
Features
- Designed for lowered vehicles
- Improve handling and comfort
- A perfect match for Dynamic+ Lowering Springs
- Made from OEM quality PUR (polyurethane) material
- Reduced height helps maintain full suspension movement on lowered vehicles:
- OE height: 115mm
- 034 height: 100mm
- Increased durometer over OE for more effective compression limiting without becoming overly harsh:
- OE: 50A
- 034: 55A
Part Number Interchange
- 8K0 512 131 B
- 8K0 512 131 K
- Material
- Polyurethan (PUR), OEM-Qualität
- Height (OE)
- 115 mm
- Height (034)
- 100 mm
- Durometer (OE)
- 50A
- Durometer (034)
- 55A
- Shipping weight
- 0.5 kg
–
Audi (15)
- A4 B8/B8.5 (2009-2016) 2.0 TFSI
- A4 B8/B8.5 (2009-2016) 3.2L FSI
- A5 B8/B8.5 (2008-2016) 2.0 TFSI
- A5 B8/B8.5 (2008-2016) 3.2L FSI
- A6 C7/C7.5 (2012-2018) 2.0 TFSI
- A6 C7/C7.5 (2012-2018) 3.0 TDI
- A6 C7/C7.5 (2012-2018) 3.0 TFSI
- A7 C7/C7.5 (2012-2018) 3.0 TDI
- A7 C7/C7.5 (2012-2018) 3.0 TFSI
- Allroad B8/B8.5 (2010-2016) 2.0 TFSI
- RS6 C7/C7.5 (2012-2018) 4.0 TFSI
- RS7 C7/C7.5 (2012-2018) 4.0 TFSI
- S4 B8/B8.5 (2010-2016) 3.0 TFSI
- S6 C7/C7.5 (2012-2018) 4.0 TFSI
- S7 C7/C7.5 (2012-2018) 4.0 TFSI
- 1 Pair - Bump Stops
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ Sway Bar Kit, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5034-402-10/05/29/35€432.04 – €872.593 variants
Dynamic+ Billet Adjustable Front Sway Bar End Links For Audi B8/B9, C7/C8, 4M.5, 4M8 & Porsche 95B Chassis034-402-4033€188.64
Dynamic+ Adjustable Rear Sway Bar End Link Kit for B8/8.5 Audi A4/S4, A5/S5, Q5/SQ5 & C7/C7.5 A6/S6/RS6, A7/S7/RS7 & 95B Porsche Macan034-402-4030€203.24
Drivetrain Mount Insert Package, Billet Aluminum, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & Porsche 95B Macan034-509-6000€357.80



