Germany

← Back to catalogue

Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P
  • Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P
  • Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P
  • Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P
  • Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P
  • Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P
  • Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P
  • Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047-P

Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI

Part number: 034-145-Z047-PBundle

€1,973.97 – €3,288.33

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Dual Pulley Performance Pack Hardware Kit: Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI

Dynamic+ End User Flashing Kit: Dynamic+ End User Flashing Kit R4

3.0 TFSI Stage 2+ ECU Tune: Stage 2+

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Complete upgrade kit to bring the supercharged 3.0 TFSI V6 up to Stage 2+, delivering up to 540 HP and 491 ft-lbs of torque. Includes ECU tuning, optional DSG transmission tuning, supercharger and crank pulleys, drive belt, and installation hardware. DSG vehicles must select the TCU Tune option; do not select it for ZF8 automatic or 6-speed manual transmissions.

Versions
VersionPart numberPrice
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · – · – · –034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903€1,973.97
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · – · – · ✓034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903 + 034-202-6006€2,205.20
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · – · ✓ · –034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903 + 034-103-2550€2,515.54
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · – · ✓ · ✓034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903 + 034-103-2550 + 034-202-6006€2,746.77
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · ✓ · – · –034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903 + 034-103-2911€2,515.54
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · ✓ · – · ✓034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903 + 034-103-2911 + 034-202-6006€2,746.77
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · ✓ · ✓ · –034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903 + 034-103-2911 + 034-103-2550€3,057.10
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · Dynamic+ End User Flashing Kit R4 · Stage 2+ · ✓ · ✓ · ✓034-145-Z047-P: 034-145-Z047 + 034-103-3306 + 034-103-2903 + 034-103-2911 + 034-103-2550 + 034-202-6006€3,288.33

Description

Product Description

This kit includes all hardware and software components needed to upgrade an Audi B8 S4/S5/SQ5, C7 A6/A7, or D4 A8 equipped with the supercharged 3.0 TFSI V6 to Stage 2+ performance levels. Together, the mechanical components and ECU calibration transform the drivetrain into a significantly more capable package, suitable for track days, drag strip launches, and daily driving alike.

The Dynamic+ 3.0 TFSI Performance Software is flashed through the factory OBD-II port, with no physical modification to the factory ECU required. Stage 2+ calibrations are available for 91 Octane, 93 Octane, 100 Octane, 104 Octane, and E40 fuel.

Note: To achieve the maximum power potential of this kit, an upgraded heat exchanger is recommended to prevent heat soak, along with an upgraded high-pressure fuel pump to support the E40 fueling calibration.

What's Included

  • Dynamic+ Stage 2+ ECU Tuning (91, 93, 104, and E40 fuel calibrations, including Advanced Launch Control features)
  • Dynamic+ DL501 DSG Transmission Tuning (optional via checkbox, not for use with 6-speed manual transmissions)
  • Dynamic+ End User Flashing Kit
  • Supercharger Pulley Upgrade
  • 190mm Billet Aluminum Crank Pulley Upgrade
  • Bando Rib-Ace PK1320 Pulley Belt
  • Installation Hardware

Stage 2+ ECU Tuning

The Dynamic+ Stage 2+ Performance Software for the Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, and D4 A8 3.0 TFSI increases horsepower and torque beyond Stage 2 levels by combining the 190mm crank pulley with the upper supercharger pulley. The pulley upgrade increases boost pressure from the factory Eaton TVS1320 supercharger across the powerband, while the proprietary calibration safely extracts additional power from the 3.0 TFSI engine.

Stage 2+ software raises the redline to 7,400 RPM, broadening the powerband and increasing peak output compared to the factory limit of 6,400–7,000 RPM (depending on B8 or B8.5 generation). Throttle mapping in both Dynamic and Comfort modes has been refined for improved response and more precise modulation. The software also enables left-foot braking for greater control during track driving.

  • Increased horsepower and torque throughout the powerband
  • Improved throttle response, acceleration, and driving characteristics
  • Available in 91 Octane, 93 Octane, and 100 Octane calibrations
  • Refined throttle mapping for enhanced response and precision
  • Raised RPM limit to 7,200 for a broader powerband
  • Speed limiter removed for increased top speed
  • Track-tested calibrations for consistent power delivery
  • Flashed directly via the factory OBD-II port

Advanced Launch Control

Dynamic+ tuning includes newly developed Advanced Launch Control programs available to all existing and future Dynamic+ customers. Desired launch RPM can be adjusted on the fly via the cruise control stalk. Below 10 km/h, the intercooler pumps and engine fans run at full speed to ensure optimal cooling during staging, resulting in lower intake air temperatures and allowing the driver to tailor launch settings to current conditions.

DSG Software Upgrade

Flashed through the vehicle's OBD-II port, the proprietary DL501 TCU calibration safely raises the factory transmission's RPM limiter, extending the usable powerband to take full advantage of Stage 1/2 Performance Software. Shift speed is increased and shift points in Drive and Sport modes are optimized for improved performance and driveability, without sacrificing comfort or reliability. The calibration was developed in-house on a B8 Audi S4 development vehicle and refined across multiple enthusiast-owned B8/B8.5 S4/S5 vehicles.

  • Raised RPM limit for use with Stage 1/2 Performance Software
  • Optimized shift points in Drive and Sport modes
  • Increased shift speed
  • Manual mode auto-downshift disabled
  • User-selectable 4-step launch control (3,000 / 3,500 / 4,500 / 5,000 RPM)
  • Raised launch control counter limit (from factory setting of 200)
  • Flashed directly via the factory OBD-II port - no TCU removal required

Dynamic+ End User Flashing Kit

This kit allows customers to install the Dynamic+ Performance Software themselves. It also enables receiving and installing software updates and revisions, flashing back to stock, or upgrading to the next stage of performance software.

Requirements for End User Flashing:

  • Windows 10 laptop with an available USB port
  • Power supply for the laptop
  • Secure wired (or very stable WiFi) high-speed internet connection
  • CTEK trickle charger (or similar)
  • Available electrical outlets

Supercharger Pulley Upgrade

At 57.70mm in diameter, this supercharger pulley is significantly smaller than the factory unit, increasing the supercharger's drive ratio. Spinning the supercharger faster yields increased boost pressure throughout the RPM range, resulting in greater horsepower and torque when paired with Stage 2+ Performance Software.

190mm Crank Pulley Upgrade

The 190mm crank pulley upgrade for the Audi B8/B8.5 S4/S5/Q5/SQ5, C7 A6/A7, and D4 A8 is a straightforward way to increase supercharger rotational speed and boost pressure. This kit is compatible with both the OEM supercharger pulley and the supercharger pulley upgrade.

Machined from a single piece of 6061-T6 billet aluminum and finished in black anodizing for corrosion resistance, the pulley is 62% lighter than the OE unit, significantly reducing rotational weight and parasitic loss. It is a complete inner and outer pulley assembly, not an "overlay" design, which would add rotational weight.

  • Machined from a single piece of 6061-T6 billet aluminum
  • Black anodized with laser engraving for a durable finish
  • 62% lighter than stock, reducing parasitic loss
  • Complete inner and outer pulley, not an "overlay" design that adds weight

Recommended Add-On: Front Main Seal

When installing the crank pulley, replacing the front main seal located directly behind it is a worthwhile addition, as access is already provided. The billet aluminum front main seal replaces the failure-prone factory stamped steel wiper seal on the 3.0 TFSI. It is CNC machined from 6061-T6 aluminum and uses an OEM Viton seal from Elring with an integral tension spring for a secure seal against the crankshaft. Unlike the factory seal, which can be damaged by a shredded serpentine belt, this billet seal is significantly more resistant to such failures.

The seal has been tested under high heat and demanding conditions, making it a reliable replacement for a leaking factory seal as well as an effective preventative upgrade against oil leaks and related performance issues.

Supercharger Pulley Diameter
57,70 mm
Crank Pulley Material
6061-T6 Aluminium, einteilig gefräst
Crank Pulley Weight Reduction
62% leichter als Serie
Crank Pulley Finish
Schwarz eloxiert mit Lasergravur
Raised RPM Limit
7.400/min (Stage 2+ Software)
Shipping weight
2.6 kg

–

  • Dynamic+ Stage 2+ ECU Tuning (91, 93, 104, E40)
  • Dynamic+ DL501 DSG Transmission Tuning (optional)
  • Dynamic+ End User Flashing Kit
  • Supercharger Pulley Upgrade
  • 190mm Billet Crank Pulley Upgrade
  • Bando Rib-Ace PK1320 Pulley Belt
  • Installation Hardware
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Related products