Germany

← Back to catalogue

Dynamic+ Billet Adjustable Front Sway Bar End Links, E8X & E9X BMW (Non-M) 034-402-4038
  • Dynamic+ Billet Adjustable Front Sway Bar End Links, E8X & E9X BMW (Non-M) 034-402-4038

Dynamic+ Billet Adjustable Front Sway Bar End Links

Part number: 034-402-4038

€88.85

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

These adjustable billet end links replace the flimsy, imprecise OEM front sway bar end links. They transfer suspension movement to the sway bar without delay and are length-adjustable to remove preload from the bar.

Description

Product Description

These Dynamic+ billet adjustable front sway bar end links replace the OEM units, which are prone to flex and imprecision by design. They transfer suspension movement to the sway bar without compromise and are adjustable in length, allowing elimination of preload on the sway bar. High-misalignment ball joints are used to prevent binding as the suspension articulates.

These characteristics make the kit well suited to both street and track use, while requiring minimal maintenance.

What Is Sway Bar Preload?

When a sway bar is preloaded, it is already twisted while the car is at rest and is trying to roll the car to one side as a result. This leads to asymmetric handling, with the car favoring turning one way over the other.

Preload can be identified when the car is at ride height on a flat surface: removing an end link becomes difficult because the sway bar is already twisted and applying force to the bolt, or installing the end link is difficult because the bar must be twisted to align the bolt with the hole. With equal-length, non-adjustable end links, removing preload is not possible.

With these adjustable end links, the length of each link can be set so that installation occurs at ride height without twisting the bar. Zero preload results in symmetrical handling in both left and right turns.

Features

  • CNC-machined 6061-T6 aluminum bodies, black anodized for durability
  • Zinc-plated steel ball joints
  • OEM+ quality with adjustability
  • Quieter and lower maintenance than spherical motorsport end links
  • ±0.75" of adjustability (1.5" total adjustment range)
  • Allows adjustment of sway bar preload – essential when corner balancing lowered vehicles
  • Increased strength for stiffer sway bars, higher loads, and motorsport use
  • Improved sway bar reaction time and accuracy
  • Compatible with all stock and aftermarket sway bars
  • Sold in pairs

OE Part Interchange

  • 31 35 6 765 933

What's Included

  • 2x Billet aluminum adjuster rods
  • 2x Dynamic+ ball joints, right-hand thread
  • 2x Dynamic+ ball joints, left-hand thread
  • 2x Jamb nuts, right-hand thread
  • 2x Jamb nuts, left-hand thread
  • 4x M10 lock nuts
  • 4x M10 washers
  • Anti-seize compound

Installation Note

On lowered vehicles, check all clearances throughout the full range of suspension travel before installation to rule out possible interference. Using matched suspension components from the same manufacturer is recommended, as these are designed and tested to work together without interference.

Installation Effort and NVH

Installation effort is rated as mild. Based on user feedback, noise, vibration, and harshness (NVH) transmitted to the cabin is rated as none to low. As NVH perception is subjective, it may vary depending on the vehicle and the individual.

Body Material
6061-T6 Aluminium, schwarz eloxiert / 6061-T6 Aluminum, black anodized
Ball Joint Material
Verzinkter Stahl / Zinc-plated steel
Adjustment Range
±0,75 Zoll (1,5 Zoll gesamt) / ±0.75" (1.5" total)
OE Part Interchange
31 35 6 765 933
Sold As
Paar / Pair
Shipping weight
0.9 kg

–

  • 2x Billet aluminum adjuster rods
  • 2x Dynamic+ ball joints, right-hand thread
  • 2x Dynamic+ ball joints, left-hand thread
  • 2x Jamb nuts, right-hand thread
  • 2x Jamb nuts, left-hand thread
  • 4x M10 lock nuts
  • 4x M10 washers
  • Anti-seize compound
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products