Germany

← Back to catalogue

034Motorsport Density Line Engine Mount for B5, B6, B7, and C5 Audi Models | 034-509-0007
  • 034Motorsport Density Line Engine Mount for B5, B6, B7, and C5 Audi Models | 034-509-0007
  • 034Motorsport Density Line Engine Mount for B5, B6, B7, and C5 Audi Models | 034-509-0007
  • 034Motorsport Density Line Engine Mount for B5, B6, B7, and C5 Audi Models | 034-509-0007
  • 034-509-0007 - Street Density
  • 034-509-0007 - Track Density

Motor Mount, Density Line, B5, B6, B7, and C5 Audi Models

Part number: 034-509-0007

Not listed by the manufacturer for your selected vehicle: Audi A5 B10 (2025+) 2.0 TFSI

€155.78 – €160.64

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Density Line Motor Mounts set a new standard in comfort and performance. Manufactured from high-durometer rubber with void-free, fluid-free construction, they eliminate the slop of the factory mounts for improved shifting feel and driving dynamics without sacrificing comfort.

Versions
VersionPart numberPrice
Street Density034-509-0007-SD€155.78
Track Density034-509-0007-TD€160.64

Description

Density Line Motor Mounts

Density Line Motor Mounts for B5, B6, B7, and C5 Chassis Audi and B5 Chassis Volkswagen models represent a new standard in comfort and performance. The mounts are redesigned with performance in mind and manufactured from high-durometer rubber for increased performance and durability without sacrificing comfort. They are optimized void-free and fluid-free, eliminating the slop associated with the factory mounts.

Street Density

The Street Density Engine Mount Pair is manufactured from 50 durometer rubber, approximately 10% stiffer than stock. Since the mounts are also optimized void-free and solid-filled, the resulting mount is approximately 25% stiffer than stock. The mount bases are made from steel, much stronger than the factory aluminum ones, to cope with the added stress of spirited driving.

The result is greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without any significant increase in noise, vibration, or harshness (NVH) inside the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.

Track Density

The Track Density Engine Mount Pair is manufactured from 80 durometer rubber, approximately 90% stiffer than stock. Since the mounts are also optimized void-free and solid-filled, the resulting mount is approximately 120% stiffer than stock. The mount bases are made from steel, much stronger than the factory aluminum ones, to cope with the added stress of spirited driving.

The result is a locked-down drivetrain, solid shifting, and virtually no wheel hop. Track Density Mounts will cause a noticeable increase in noise, vibration, and harshness (NVH) inside the cabin.

Features

  • Manufactured from 50 durometer (Street Density) or 80 durometer (Track Density) rubber with optimized void-free construction
  • Reduced drivetrain slop
  • Decreased engine movement under load
  • More direct power transfer
  • Improved shifting feel
  • Complete drop-in replacement of factory engine mounts
  • Sold individually (one vehicle requires 2 mounts)

Fitment

  • 1996–2001 Audi A4 (B5) – 1.8T / 2.8L
  • 2000–2002 Audi S4/RS4 (B5) – 2.7T
  • 2002–2005 Audi A4 (B6) – 1.8T / 3.0L
  • 2005–2008 Audi A4 (B7) – 2.0T FSI / 3.2L FSI – Please note: Tiptronic vehicles with active mounts require two Resistor Bypasses to prevent the MIL from illuminating
  • 1998–2004 Audi A6 (C5) – 2.7T / 2.8L / 3.0L
  • 2001–2003 Audi Allroad (C5) – 2.7T
  • 1998–2005 Volkswagen Passat (B5 / B5.5) – 1.8T / 2.8L / 4.0L W8

Installation

Installation instructions are available.

High-Durometer Rubber vs. Polyurethane

Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane. While vulcanized rubber mounts are more expensive to prototype due to increased manufacturing complexity and high initial tooling costs, rubber is inherently a better damping medium than polyurethane for mounts and bushings.

Rubber handles both tension and compression, while polyurethane mounts rely on the damping medium being effective only under compression. Rubber also performs excellently in shear, where polyurethane is ineffective, making it ideal for applications that apply shear force to the bushing during articulation.

Rubber does not pack and wear like polyurethane, resulting in a long-lasting part with consistent performance and comfort.

Street Density vs. Track Density

Street Density Mounts are recommended for all daily-driven vehicles. They offer a significant increase in performance with a minimal increase in NVH transfer into the cabin. Track Density Mounts are recommended for purpose-built track cars, or for those who do not mind significantly increased engine noise and vibration in the cabin.

Street Density or Track Density can be selected from the dropdown menu. Sold individually; one vehicle requires 2 mounts.

Please note: The nuts for these mounts should be torqued to the factory specification of 25 Nm (approximately 18.5 ft-lbs). Overtightening these nuts can cause damage to the mount.

Hardness Street Density
50 Shore
Hardness Track Density
80 Shore
Stiffness Street Density vs. stock
~25%
Stiffness Track Density vs. stock
~120%
Mount base material
Stahl / Steel
Nut torque specification
25 Nm
Shipping weight
0.9 kg

–

–

Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products