Germany

← Back to catalogue

Motor Mount, Density Line, B6/B7 Audi S4/RS4 V8 | 034-509-0008

Motor Mount, Density Line, B6/B7 Audi S4/RS4 V8 & C5 Audi A6/S6/RS6/Allroad 4.2L

Part number: 034-509-0008

Not listed by the manufacturer for your selected vehicle: Volkswagen Golf/GTI/Rabbit Mk8.5 (2025+) 2.0 TFSI

€155.78

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Density Line motor mounts for the B6/B7 Audi S4/RS4 and C5 A6/S6/RS6/Allroad with 4.2L V8 reduce unwanted engine movement under load and drivetrain slop when shifting. By eliminating the voids and fluid chambers found in the factory mounts and using steel mount bases instead of aluminum, common failures of the stock mounts are avoided and the failure-prone Active Engine Mount feature is removed. NVH level: low to medium.

Description

Description

These Density Line motor mounts were developed for the B6/B7 Audi S4/RS4 and the C5 Audi A6/S6/RS6 and Allroad, and are manufactured by an OE supplier to custom specifications. They are solid rubber mounts with a 50 durometer rating, approximately 10% stiffer than the stock mounts. This keeps everyday ride quality smooth while noticeably improving drivetrain dampening. Since these mounts contain no voids or air pockets, the resulting reduction in drivetrain movement is actually around 25%, even though the rubber itself is only 10% stiffer.

This is not an OE mount or an RS4 mount, and these mounts are not available from any other source – they are built by an OE supplier specifically for performance applications.

For a complete performance-oriented drivetrain mounting setup, these motor mounts can be combined with a Density transmission mount and a snub mount with cage.

Fitment

  • 2003–2005 Audi S4 (B6), 4.2L V8
  • 2006–2008 Audi S4 (B7), 4.2L V8
  • 2007–2008 Audi RS4 (B7), 4.2L FSI
  • 1999–2005 Audi Allroad (C5), 4.2L V8
  • 1999–2004 Audi A6/S6 (C5), 4.2L V8
  • 2002–2004 Audi RS6 (C5), 4.2T

Installation Notes

For vehicles equipped from the factory with Active Engine Mounts, separately available resistor bypasses for the active motor mounts are offered. These simply plug into the factory harness and prevent the check engine light from illuminating.

The nuts for these mounts must be torqued to the factory specification of 25 Nm (approximately 18.5 ft. lbs.). Overtightening these nuts can damage the mount.

Durometer
50 Shore A
Mount Base Material
Stahl
Nut Torque Spec
25 Nm
Shipping weight
0.4 kg

–

–

Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products