
Motor Mount Pair, Street Density, MkV/MkVI Volkswagen Golf/Jetta & 8P Audi A3 2.0 TDI
Part number: 034-509-5024-SD
€417.43
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Street Density engine mount pair for MkV/MkVI Volkswagen Golf/Jetta and 8P Audi A3 2.0 TDI models. The Density Line mounts are manufactured from high-durometer rubber with void-free, fluid-free construction, eliminating the slop of the factory mounts. NVH rating: none to low.
Description
Product Description
The Street Density Engine Mount Pair is designed for MkV/MkVI Volkswagen Golf/Jetta and 8P Audi A3 2.0 TDI models. Density Line Mounts set a new standard in comfort and performance, manufactured from high-durometer rubber that handles both tension and compression loads for consistent, long-lasting damping. Their void-free, fluid-free construction eliminates the slop associated with the factory mounts.
Street Density
The Street Density Engine Mount Pair is manufactured from 60 durometer rubber, approximately 35% stiffer than stock. Because the mounts are also void-free and solid-filled, the resulting mount is roughly 60% stiffer than stock. The cast aluminum mount bodies have been redesigned to handle the added stress of spirited driving.
This results in greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without a significant increase in noise, vibration, or harshness (NVH) inside the cabin. These mounts are a completely re-engineered performance solution, not inserts for use with the factory mounts.
Features
- Manufactured from 60 durometer (Street Density) rubber with optimized void-free construction
- Reduced drivetrain slop
- Decreased engine movement under load
- More direct power transfer
- Improved shifting feel
- Complete drop-in replacement of factory engine/transmission mounts
- DQ250 DSG and 02Q manual transmission compatible
- Sold in pairs (one engine mount & one transmission mount)
Fitment
- 2005–2010 Volkswagen Jetta (MkV)
- 2.0 TDI
- 2011–2017 Volkswagen Jetta (MkVI)
- 2.0 TDI (not for manual transmissions)
- 2010–2014 Volkswagen Golf (MkVI)
- 2.0 TDI
- 2006–2013 Audi A3 (8P)
- 2.0 TDI
Notes
- The motor mount does not have provisions for the TDI fuel filter and auxiliary fuel pump. Mounting provisions must be adapted by the user.
- The transmission mount will not fit vehicles with 6-speed manual, 6-speed DSG, or 4motion.
Replaces
- 1K0199262AM / 1K0 199 262AM
- 1K0199555Q / 1K0 199 555Q
- 1K0199555R / 1K0 199 555R
High-Durometer Rubber vs. Polyurethane
Density Line Mounts are manufactured from high-durometer rubber rather than polyurethane. While vulcanized rubber mounts are more complex and costly to tool and produce, rubber is inherently a better damping medium for mounts and bushings.
Rubber handles both tension and compression loads, whereas polyurethane is only effective under compression. Rubber also performs well in shear, where polyurethane is ineffective, making it well suited to control arm bushings that experience shear forces during articulation.
Unlike polyurethane, rubber does not pack and wear over time, resulting in long-lasting performance and comfort.
These mounts are currently available in Street Density only.
Note: This Street Density application uses stiffer, less compliant rubber, but shares a similar design and construction to the OEM mounts rather than being built for extreme abuse. Driving dynamics are improved, but these mounts are not intended for more punishing applications. Under normal spirited driving, they typically last up to 50,000 miles or more. More abusive use, such as aggressive drag racing, clutch dumps, hard shifting, or significant power increases, can cause premature wear or failure, often within 20,000 miles or less. For such demanding applications, the Motorsport Mounts, specifically designed for this type of use, are recommended.
- Rubber Durometer
- 60 Shore (Street Density)
- Stiffness vs. Stock
- ca. 60% steifer
- Housing Material
- Aluminiumguss
- Shipping weight
- 4.4 kg
- 1K0 199 262AM
- 1K0 199 555Q
- 1K0 199 555R
Audi (1)
- 1x Engine Mount
- 1x Transmission Mount
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Spherical Rear Trailing Arm Kit, MkV/MkVI Volkswagen Golf/Jetta/GTI/R & 8J/8P Audi A3/S3/RS3/TT/TTS/TTRS034-401-1034€665.70
Sway Bar End Link Pair, Motorsport, Front, Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-402-4002€399.19
Adjustable Solid Rear Sway Bar, MkV/MkVI Volkswagen Golf/GTI/Jetta/GLI/Rabbit & 8J/8P Audi TT/A3 FWD034-402-1003€400.39
Control Arm Pair, Density Line, Rear Upper Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-401-1053€608.49
