
Motor Mount Set, Density Line, Mk5 & Mk6 Volkswagen, 8J & 8P Audi, 2.0T FSI
Part number: 034-509-5001-SD
€480.72
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete Density Line engine mount set for Mk5 and Mk6 Volkswagen and 8P/8J Audi models. Manufactured from high-durometer, void-free rubber without fluid filling, these mounts deliver noticeably tighter drivetrain response with a moderate increase in cabin NVH (NVH level: Medium).
Description
This set covers the complete Density Line engine mount lineup for Mk5 and Mk6 chassis Volkswagen models as well as 8P and 8J chassis Audi models. The mounts have been redesigned with performance in mind and are manufactured from high-durometer rubber for increased performance and durability without sacrificing comfort. Their void-free and fluid-free construction eliminates the slop associated with the factory mounts.
Street Density
The Street Density engine mount pair is manufactured from 60 durometer rubber, approximately 35% stiffer than stock. Because the mounts are also void-free and solid-filled, the resulting mount is roughly 60% stiffer than stock overall. The cast aluminum mount bodies have been redesigned to handle the added stress of spirited driving.
The result is greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without a significant increase in noise, vibration, or harshness (NVH) inside the cabin. These mounts are a fully re-engineered performance solution, not simple inserts for the factory mounts.
Features
- Manufactured from 60 durometer (Street Density) rubber with void-free construction
- Reduced drivetrain slop
- Reduced engine movement under load
- More direct power transfer
- Improved shifting feel
- Complete drop-in replacement of factory engine, transmission, and dogbone mounts
- Compatible with DQ250 DSG and 02Q manual transmissions
- Sold as a set (one engine mount, one transmission mount, and one pair of dogbone mounts)
Fitment
- 2006–2013 Audi A3 (8P): 2.0T FSI / 2.0 TSI
- 2006–2013 Audi TT / TTS (8J): 2.0T FSI / 2.0 TSI
- 2005–2009 Volkswagen Eos / GLI / GTI / Jetta / R32 (Mk5): 2.0T FSI / 2.0 TSI
- 2010–2014 Volkswagen Eos / GLI / Golf / GTI / R (Mk6): 2.0 TSI
High-Durometer Rubber vs. Polyurethane
Density Line mounts are manufactured from high-durometer rubber instead of polyurethane. While vulcanized rubber mounts are more complex and costly to develop, rubber is inherently a better damping medium for mounts and bushings.
Rubber handles both tension and compression loads effectively, while polyurethane only dampens well under compression. Rubber also performs well in shear, where polyurethane is ineffective, making it well suited for control arm bushings subjected to shear forces during articulation.
Unlike polyurethane, rubber does not pack and wear over time, resulting in a long-lasting part with consistent performance and comfort.
Street Density mounts are recommended for all daily-driven vehicles. They provide a significant increase in performance with only a minimal increase in NVH transferred into the cabin. Track Density mounts are intended for purpose-built track cars or drivers who don't mind a noticeable increase in engine noise and vibration inside the cabin.
Note: This Street Density application uses stiffer, less compliant rubber, but follows a design and construction similar to the OEM mounts rather than one built for extreme abuse. Driving dynamics are improved, but these mounts are not necessarily suited for more punishing use cases. Under normal spirited driving, these mounts typically last up to 50,000 miles or more. More abusive use—such as aggressive drag racing, clutch dumps, aggressive shifting, or significant power increases—can cause premature wear or failure, sometimes within 20,000 miles. For applications involving that level of abuse, we strongly recommend our Motorsport Mounts, which are designed specifically for such use.
- Durometer (Street Density)
- 60 Shore
- Stiffness vs. stock
- ca. 60% / approx. 60%
- NVH Level
- Mittel / Medium
- Mount Body Material
- Aluminiumguss / Cast Aluminum
- Shipping weight
- 5.2 kg
–
Audi (6)
Volkswagen (15)
- Beetle Mk6 (2012-2019) 2.0 TSI
- CC B7 (2009-2015) 2.0 TSI
- EOS Mk5 (2006-2016) 2.0 TSI
- EOS Mk5 (2006-2016) 2.0T FSI
- Golf R & R32 Mk6 Golf R (2012-2013)
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0 TSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0T FSI
- Jetta/GLI Mk6 (2011-2018) 2.0 TSI
- Jetta/GLI Mk5 (2005-2010) 2.0 TSI
- Jetta/GLI Mk5 (2005-2010) 2.0T FSI
- Passat B6 (2006-2010) 2.0 TSI
- Passat B6 (2006-2010) 2.0T FSI
- Tiguan Mk1.5 (2012-2017) 2.0 TSI
- Tiguan Mk1 (2009-2011) 2.0 TSI
- 1 Engine Mount
- 1 Transmission Mount
- 1 Pair of Dogbone Mounts
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com