Germany

← Back to catalogue

034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW
  • 034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW
  • 034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW
  • 034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW
  • 034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW
  • 034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW
  • 034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW
  • 034-108-1023 P34 Cold Air Intake, B9 Audi A4/A5/allroad ROW

P34 Cold Air Intake, B9/B9.5 Audi A4/A5/allroad ROW

Part number: 034-108-1023

Not listed by the manufacturer for your selected vehicle: Audi S6 C4 (1995-1997) 2.2T 20V

€670.57

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

The P34 Cold Air Intake System replaces the factory airbox on the B9/B9.5 Audi A4/A5/allroad, increasing airflow to the turbocharger while delivering a sportier induction sound and noticeably improved acceleration. Developed through extensive study of the factory airbox design, it offers a clean OEM+ look with straightforward bolt-on installation. This product is intended solely for vehicles with a MAF sensor mounted directly to the airbox.

Description

High-Performance Intake for the EA888 Gen 3

This intake system was developed specifically for the longitudinally mounted EA888 2.0T Gen 3 engine found in the B9/B9.5 Audi A4/A5/allroad. The P34 Cold Air Intake System provides measurable increases in horsepower and torque, a sportier induction and turbocharger sound, and a well-finished airbox design.

Multiple designs were modeled, prototyped, and tested throughout development to ensure both measurable performance gains and excellent fitment. The result is a partially enclosed airbox that retains the factory fresh air inlet duct and heat shield, houses a large 5-inch inlet conical air filter, and routes air through a CNC-machined billet aluminum velocity stack and the factory-mounted MAF sensor into a reinforced silicone turbo inlet pipe.

Minimizing Unnecessary Filter Shrouding

Allowing air to flow freely around and into the filter is critical to a high-flowing intake system. If this surrounding airflow is restricted by an undersized enclosure, overall flow suffers significantly - a common shortcoming of kits that emphasize filter size alone without properly sizing the housing around it. Extensive testing went into matching filter size to housing volume for this system. The result is a correctly sized filter in a correctly sized housing, delivering maximum airflow with OEM-level filtration.

Features

  • Developed in-house by the engineering team
  • Dyno-proven horsepower and torque gains
  • Increased airflow to the turbocharger inlet
  • Enhanced engine and induction sound
  • Improved throttle response
  • Excellent fit and finish matching the factory engine bay
  • Stealthy OEM+ design utilizing the factory inlet duct and heat shield
  • Large 5-inch inlet conical air filter
  • CNC-machined billet aluminum velocity stack with MAF mount provisions
  • Large-diameter, flow-optimized turbo inlet hose
  • Secure installation using factory mounting grommets
  • Straightforward installation instructions

Fitment Note

Before purchasing, verify whether your vehicle's airbox has a MAF (mass airflow) sensor mounted directly to it. This P34 Cold Air Intake (ROW - for markets outside North America) is designed exclusively for vehicles where the MAF sensor is attached directly to the factory airbox. Vehicles without a MAF sensor at the airbox require the alternate version of the P34 intake system designed for that configuration.

Emissions Disclaimer

This product is sold for racing use as well as for vehicles not registered for on-highway use. It is not legal for use on emissions-controlled highway or street vehicles.

Filter Inlet Diameter
5 Zoll / 5 inch
Velocity Stack Material
CNC-gefrästes Aluminium-Vollmaterial / CNC-machined billet aluminum
Shipping weight
3.7 kg

–

–

Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products