S34 Carbon Fiber Intake, Audi B8/8.5 A4/A5/Allroad
Part number: 034-108-1049
Not listed by the manufacturer for your selected vehicle: Volkswagen Golf R & R32 Mk7/Mk7.5 Golf R (2015-2019)
€519.66
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The S34 Carbon Fiber Intake for the 2.0T EA888 Gen2 in the Audi B8/B8.5 A4/A5 and Allroad delivers more power, a more aggressive induction sound and overall improved performance in a clean, well-finished package. Installation effort: mild.
Description
Product Description
This comprehensive intake solution was developed for the turbocharged 2.0T EA888.2 engine found in the B8/B8.5 A4/A5 and Allroad models. The S34 Carbon Fiber Intake offers measurable gains in horsepower and torque, a more aggressive induction and turbocharger sound, and a carbon fiber heat shield that keeps hot air from the engine bay out of the intake system.
Throughout development, several designs were modeled, prototyped, and tested to ensure both measurable performance gains and precise fitment. The result is an open-airbox design that uses the factory fresh air duct to channel cool outside air to the filter. The larger airbox allows for a 4" inlet conical air filter free of restrictive shrouding, with air routed through a CFD-optimized 4-ply silicone inlet hose that smoothly increases air velocity to the throttle body.
Minimizing Unnecessary Filter Shrouding
A key factor in a high-flowing intake is the ability for air to move freely around and into the filter. If airflow around the filter is restricted, flow into the filter suffers as well. Many aftermarket kits fit an oversized filter into a housing that cannot properly accommodate it, choking the filter and reducing overall flow. Extensive testing and refinement of the housing geometry allowed for maximum airflow surrounding the filter, resulting in the correct filter size paired with the correct housing size for maximum flow and OEM-level filtration.
Maximizing Airflow
A CFD-optimized 4-ply silicone intake tube was developed as a direct, high-performance replacement for the factory plastic accordion/sound-deadening hose.
Using CAD software and 3D scanning technology, the cross-sectional area of the intake tube was optimized while respecting the factory space constraints. The result is a component with smooth transitions that makes the most of the available space and ensures unrestricted airflow to the throttle body.
Performance Air Filter
The S34 Intake houses a high-flow conical air filter with a double-layer pleated cotton filtration medium capable of trapping particles as small as 5 microns. The enlarged filtration surface increases flow while maintaining strong filtration performance. This filter has been tested in applications exceeding 800HP with minimal restriction and reliable filtration.
Unlike many intake kits that leave the filter unsupported, the S34 system includes a filter support that prevents unwanted movement while still allowing for engine movement under varying load. The air shroud also remains fixed, avoiding rubbing against surrounding engine bay components.
Product Features
- Developed in-house
- Fits both left- and right-hand drive configurations
- High-quality carbon fiber air block-off shield
- High-gloss epoxy finish
- 4-ply gloss black silicone intake tube
- OEM+ fit and finish
- No rubbing or excessive movement
- Improved airflow over the factory airbox and intake tube
- Stock intake: 377.63 CFM @ 28in H²O
- S34 intake: 524.18 CFM @ 28in H²O, approx. 39% increase, restriction-free flow for over 650HP
- Enhanced engine induction sounds
- Improved throttle response
- Large 4" inlet conical pleated cotton air filter
- Reduced intake air temperature
- Secure installation using factory mounting grommets
- Simple, straightforward installation instructions
What's Included
- S34 carbon fiber heat shield
- S34 4" inlet silicone hose (Qty. 2)
- S34 4" double-layered cotton pleated filter
- Stainless steel filter support bracket
- Miscellaneous hardware
CFM Gains
CFM stands for "cubic feet per minute" and describes airflow volume. The higher the number, the more horsepower an intake can support. Testing was performed at 28" of water on a Superflow airflow bench for accurate, repeatable results.
- Stock intake: 377.63 CFM @ 28in H²O
- S34 intake: 524.18 CFM @ 28in H²O, approx. 39% increase, restriction-free flow for over 650HP
- Filter Micron Rating
- 5 Mikron
- Filter Inlet Diameter
- 4 Zoll
- Stock Intake Flow
- 377,63 CFM @ 28" H²O
- S34 Intake Flow
- 524,18 CFM @ 28" H²O
- Flow Increase
- ca. 39%
- Intake Tube Material
- 4-lagiges Silikon
- Heat Shield Material
- Carbon, hochglänzende Epoxid-Oberfläche
- Shipping weight
- 3.4 kg
–
- S34 carbon fiber heat shield
- S34 4" inlet silicone hose (Qty. 2)
- S34 4" double-layered cotton pleated filter
- Stainless steel filter support bracket
- Miscellaneous hardware
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
X-Clear Driveshaft Tunnel Brace, B8 Audi A4/S4/RS4 & A5/S5/RS5034-603-0030€170.38
Front Strut Brace, Billet Aluminum, B8 Audi A4/S4 & Allroad034-603-0010€674.22
Turbo Muffler Delete with Test Ports, Volkswagen & Audi EA888.3 1.8T/2.0T 4 Cylinder Engines034-145-Z040€170.38
Drivetrain Mount Insert Package, Billet Aluminum, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & Porsche 95B Macan034-509-6000€357.80
X-Brace Billet Aluminum Chassis Reinforcement, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5, Allroad, & 95B Porsche Macan034-603-0008€915.18
High Flow Racing Catalytic Converter, B8/B8.5 Audi A4, A5, Q5, Allroad 2.0 TFSI034-105-4023€546.42














