Germany

← Back to catalogue

2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004
  • 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 034-301-1004

Stage 2 2-Piece 390mm Floating Front Brake Rotor Upgrade Kit, Audi R8 Gen 1 & Gen 1.5 (4.2 V8 & 5.2 V10)

Part number: 034-301-1004

Not listed by the manufacturer for your selected vehicle: Volkswagen Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 1.8T Gen3

€1,709.89

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Complete 2-piece 390x34mm front brake rotor upgrade kit for the Gen 1 & 1.5 Audi R8, including caliper spacers. Designed to work with the factory front calipers, each rotor weighs approximately 23.9 lbs (0.6 lbs lighter than the 24.5 lb factory rotor) and features 72 directionally curved vanes for improved cooling.

Description

Product Description

This 2-piece 390x34mm front brake rotor upgrade kit for the Gen 1 & 1.5 Audi R8 is a complete replacement rotor and caliper spacer kit, designed to work with the factory front calipers found on the Gen 1 & 1.5 R8.

By increasing the diameter of the front rotor, the factory caliper is able to provide greater braking force. This larger front rotor also has an increased cooling capacity over the factory-sized rotor.

Weighing in at approximately 23.9 lbs, each rotor reduces rotational weight by 0.6 lbs on each corner compared to the factory 24.5 lb rotor. While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture and dissipate heat.

The central hat of the rotor is manufactured from 6061-T6 aircraft specification aluminum. The disc itself is constructed from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its form during hard street use and extended track sessions. From the factory, the same rotor is fitted on both sides of the R8, resulting in incorrect venting and cooling on one side. This upgrade kit uses 72 directionally curved vanes, correctly oriented for each side of the vehicle, to force cool air through both rotors and dissipate heat evenly.

The rotor face uses J-slots to clean the pad and surface of contaminants and allow hot pad outgassing, while reducing overall braking noise compared to a traditionally slotted rotor.

The rotor and hat are connected via a floating mount system using high-strength alloy steel bobbins. These pins carry the braking loads while maintaining the axial and radial float between hat and disc, allowing for safe expansion and contraction under heat.

Features

  • Larger 390x34mm rotor (OE: 365x34mm)
  • Lightweight construction (23.9 lbs vs. 24.5 lbs OE rotor)
  • Floating, 2-piece design
  • Aerospace-grade aluminum hats
  • CM-250 special alloy rotor rings
  • J-slotted friction face
  • OEM fitment and functionality
  • 72 curved vanes force cooling air through the brake disc
  • Floating bobbin mounting system
  • Replaceable rotor rings
  • Lower long-term maintenance cost

Installation Effort

Moderate

NVH Note

NVH describes the amount of noise, vibration, and harshness transmitted into the vehicle cabin. Based on user feedback, these 2-piece brake rotors transmit little to no NVH into the cabin. This is influenced by the brake pad used, as different pads create different resonances when passing over the slots, which can sometimes produce a slight whirring sound. These sounds are a direct result of the braking performance improvements: the J-slots release gas from under the brake pad, and the high-density directional vanes move substantial air, resulting in more pronounced airflow noise. Installation of other suspension components can also affect perceived NVH. As NVH is subjective, actual perception may differ from the rating given here.

Rotor Diameter x Thickness
390 x 34 mm
OE Rotor Diameter x Thickness
365 x 34 mm
Weight per Rotor
23.9 lbs
OE Rotor Weight
24.5 lbs
Hat Material
6061-T6 Aluminium
Rotor Ring Material
CM-250 Speziallegierung
Number of Vanes
72
Shipping weight
22.7 kg

–

  • 2-piece floating front rotor pair
  • Caliper spacers
  • Installation and break-in instruction sheets
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products