Strut Mount, Track Density, MkV & MkVI Volkswagen, 8J & 8P Audi
Part number: 034-601-1004-TD
€96.14
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Strut mounts manufactured from 75 durometer rubber, roughly 50% stiffer than stock and fully vulcanized to the center cups. The redesigned steel bodies withstand the added stress of spirited driving, significantly reducing mount deflection and eliminating the squeaking often heard with coilover suspensions, while keeping cabin NVH increase minimal.
Description
Product Description
The Density Line Strut Mounts are available for MkV and MkVI chassis Volkswagen models as well as 8P and 8J chassis Audi models. They represent a new standard between comfort and performance, redesigned with performance in mind and manufactured from high-durometer rubber for increased performance and durability without sacrificing comfort. The mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts.
Track Density
The Track Density Strut Mount is manufactured from 75 durometer rubber, approximately 50% stiffer than stock. The rubber is fully vulcanized to the center cups, significantly increasing the lifespan and performance of the mounts.
The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving.
The result is a significant reduction in strut mount deflection. These mounts also eliminate the annoying squeaking sound often caused by the stock strut mounts when paired with coilover suspensions, while only causing a minimal increase in noise, vibration, and harshness (NVH) inside the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.
Features
- Manufactured from 75 durometer rubber
- Rubber fully vulcanized to center cups
- Eliminates squeaking caused by factory strut mounts
- Reduced strut mount deflection
- Maintains proper suspension geometry under load
- Improved steering feel and handling
- Complete drop-in replacement of factory strut mounts
- Priced individually – two required per vehicle
Fitment
- 2006–2013 Audi A3 (8P) – all
- 2006–2013 Audi TT / TTS / TT RS (8J) – all
- 2005–2009 Volkswagen Eos / GLI / GTI / Jetta / R32 (MkV) – all
- 2010–2014 Volkswagen Eos / Jetta / GLI / Golf / GTI / R (MkVI) – all
- 2006–present Volkswagen Passat / CC (B6/B7) – all
- 2008–2013 Volkswagen Tiguan – all
- 2012–2013 Volkswagen Rabbit (MkVI) – all
- 2012–2016 Volkswagen Beetle (MkVI) – all
Replaces
- 8J0 412 331
- 1K0 412 331B
- 1K0 412 331C
High-Durometer Rubber vs. Polyurethane
Density Line mounts are manufactured from high-durometer rubber instead of polyurethane. While vulcanized rubber mounts are more expensive to prototype due to increased manufacturing complexity and high tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.
Rubber can handle stress under both tension and compression, while polyurethane mounts are only effective under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for suspension bushings subjected to shear forces during articulation.
Rubber does not pack and wear like polyurethane, resulting in a long-lasting part with consistent performance and comfort.
Technical Insight
The redesigned Volkswagen/Audi strut mount for the MkV/MkVI and 8J/8P chassis was a notable improvement over previous generations, but leaves much to be desired when paired with performance dampers or coilover suspensions.
Many owners experience a squeaking sound from the front strut mounts after installing performance dampers or coilover suspensions. The noise is most noticeable when pulling out of driveways, crossing speed bumps, or driving at low speed over uneven surfaces.
This squeaking is caused by the low-durometer rubber used in the factory strut mounts, allowing the steel center cup to move inside the rubber mount. The Track Density Strut Mount pair was designed to eliminate this issue and improve the vehicle's suspension performance.
Please note: One vehicle requires 2 mounts. Matching strut mount bearings are also available for a complete refresh of the upper strut mount.
- Rubber Durometer
- 75 Shore A
- Shipping weight
- 0.9 kg
- 8J0 412 331
- 1K0 412 331B
- 1K0 412 331C
Audi (11)
- A3 8P (2006-2013) 2.0 TDI
- A3 8P (2006-2013) 2.0 TSI
- A3 8P (2006-2013) 2.0T FSI
- A3 8P (2006-2013) 3.2L VR6 24V
- RS3 8P (2011-2013) 2.5 TFSI
- TT 8J (2008-2015) 2.0 TFSI (Valvelift)
- TT 8J (2008-2015) 2.0 TSI
- TT 8J (2008-2015) 2.0T FSI
- TT 8J (2008-2015) 3.2L VR6 24V
- TTRS 8J (2012-2013) 2.5 TFSI
- TTS 8J (2008-2015) 2.0T FSI
Volkswagen (38)
- Beetle Mk6 (2012-2019) 1.8T Gen3
- Beetle Mk6 (2012-2019) 2.0 TSI
- Beetle Mk6 (2012-2019) 2.0T Gen3
- Beetle Mk6 (2012-2019) 2.5L
- CC B7 (2009-2015) 2.0 TSI
- CC B7 (2009-2015) 3.6L VR6 FSI
- EOS Mk5 (2006-2016) 2.0 TSI
- EOS Mk5 (2006-2016) 2.0T FSI
- EOS Mk5 (2006-2016) 3.2L VR6 24V
- Golf R & R32 Mk6 Golf R (2012-2013)
- Golf R & R32 Mk5 R32 (2008)
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TDI
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TSI
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.5L
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0 TSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0T FSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.5L
- Jetta/GLI Mk6 (2011-2018) 1.8T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.0 TDI
- Jetta/GLI Mk6 (2011-2018) 2.0 TSI
- Jetta/GLI Mk6 (2011-2018) 2.0L 8V
- Jetta/GLI Mk6 (2011-2018) 2.0T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.5L
- Jetta/GLI Mk5 (2005-2010) 2.0 TDI
- Jetta/GLI Mk5 (2005-2010) 2.0 TSI
- Jetta/GLI Mk5 (2005-2010) 2.0T FSI
- Jetta/GLI Mk5 (2005-2010) 2.5L
- Passat B7 (2012-2014) 1.8T Gen3
- Passat B7 (2012-2014) 2.0 TDI
- Passat B7 (2012-2014) 2.5L
- Passat B7 (2012-2014) 3.6L VR6 FSI
- Passat B6 (2006-2010) 2.0 TSI
- Passat B6 (2006-2010) 2.0T FSI
- Passat B6 (2006-2010) 3.6L VR6 FSI
- Tiguan Mk1.5 (2012-2017) 2.0 TDI
- Tiguan Mk1.5 (2012-2017) 2.0 TSI
- Tiguan Mk1 (2009-2011) 2.0 TDI
- Tiguan Mk1 (2009-2011) 2.0 TSI
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Spherical Rear Trailing Arm Kit, MkV/MkVI Volkswagen Golf/Jetta/GTI/R & 8J/8P Audi A3/S3/RS3/TT/TTS/TTRS034-401-1034€665.70
Sway Bar End Link Pair, Motorsport, Front, Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-402-4002€399.19
Sway Bar End Links, Motorsport, Rear, Adjustable, Audi 8P/8J, VW MkV/MkVI034-402-4001€279.91
Stainless Steel Subframe Locking Collar Upgrade Kit, MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8P Audi A3034-601-0024€321.29
Adjustable Solid Rear Sway Bar, MkV/MkVI Volkswagen Golf/GTI/Jetta/GLI/Rabbit & 8J/8P Audi TT/A3 FWD034-402-1003€400.39
Adjustable Solid Rear Sway Bar, 8J/8P Audi TT/TTS/TTRS & A3/S3/RS3, MkV/MkVI Volkswagen R32 & Golf R034-402-1002€405.25



