Germany

← Back to catalogue

Supertech Valve Spring & Titanium Retainer Set, Audi EA837 3.0T & EA839 2.9T/3.0T Engines 034-201-8022
  • Supertech Valve Spring & Titanium Retainer Set, Audi EA837 3.0T & EA839 2.9T/3.0T Engines 034-201-8022
  • Supertech Valve Spring & Titanium Retainer Set, Audi EA837 3.0T & EA839 2.9T/3.0T Engines 034-201-8022

Valve Spring & Titanium Retainer Set, Audi EA837 3.0T & EA839 2.9T/3.0T Engines

Part number: 034-201-8022

Fits your vehicle: Audi Q7 4M (2017-2019) 3.0 TFSI Supercharged

€1,007.68

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

This valve spring and retainer set enables engine speeds beyond 7,200–7,600 RPM on 3.0T supercharged EA837 and 2.9T/3.0T turbocharged EA839 engines. Increased spring rates combined with lightweight titanium retainers effectively prevent valve float at high RPM. The design supports continuous use up to 8,000 RPM, with occasional runs to 8,500 RPM on hydraulic lifters.

Description

Product Description

This valve spring and retainer set is designed to safely extend the usable RPM range of 3.0T supercharged EA837 and 2.9T/3.0T turbocharged EA839 engines beyond 7,200–7,600 RPM. This is achieved through two measures: increasing the spring rate and reducing reciprocating mass by using titanium retainers. Titanium provides adequate fatigue life for street use, except for engines with very high mileage. The retainer design also allows for a longer spring, further preventing coil bind and enabling the use of camshafts with higher lift than stock.

The set is rated for continuous use up to 8,000 RPM. In practice, it has also been used occasionally up to 8,500 RPM with hydraulic lifters. Higher RPM is achievable by converting to solid lifter buckets, as the spring rate provides sufficient margin. Above 8,000 RPM, upgraded connecting rods should also be considered.

Features

  • Performance valve springs made from premium chrome silicon vanadium steel alloy for improved performance and durability
  • Increased spring rate to safely extend the powerband of the 3.0T/2.9T engine past 7,600 RPM
    • Note: Above 7,600 RPM, factory rods should be upgraded unless otherwise specified as safe by the tuner
  • 6AL4V-grade titanium retainers for reduced mass, helping to prevent valve float
  • Allows use up to 8,000 RPM, with occasional use to 8,500 RPM on hydraulic lifters
    • Higher RPM possible by converting to solid lifter buckets
  • Complete set of 24 springs and retainers

Spring Data

ParameterValue
Seat Pressure (Intake)73 lbs @ 38.60 mm
Seat Pressure (Exhaust)85 lbs @ 37.20 mm
Open Pressure (Intake)178 lbs @ 10 mm
Open Pressure (Exhaust)190 lbs @ 10 mm
Max Lift (Intake)12.50 mm
Max Lift (Exhaust)11.00 mm
Coil Bind24.90 mm
Spring Rate10.50 lbs/mm
Spring Outer Diameter24.00 mm
Spring Inner Diameter16.50 mm

What's Included

  • 24x Single Springs
  • 24x Titanium Retainers
Valve Spring Material
Chrom-Silizium-Vanadium-Stahl / Chrome Silicon Vanadium Steel
Retainer Material
6AL4V Titan / 6AL4V Titanium
Seat Pressure Intake
73 lbs @ 38,60 mm
Seat Pressure Exhaust
85 lbs @ 37,20 mm
Open Pressure Intake
178 lbs @ 10 mm
Open Pressure Exhaust
190 lbs @ 10 mm
Max Lift Intake
12,50 mm
Max Lift Exhaust
11,00 mm
Coil Bind
24,90 mm
Spring Rate
10,50 lbs/mm
Spring Outer Diameter
24,00 mm
Spring Inner Diameter
16,50 mm
Shipping weight
1.1 kg

–

  • 24x Single Springs
  • 24x Titanium Retainers
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products