X34 4" Carbon Fiber Closed-Top Cold Air Intake System Audi TT RS & RS3 2.5 TFSI EVO
Part number: 034-108-1041
€1,142.76
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The X34 4" Carbon Fiber Closed-Top Cold Air Intake for the 2.5 TFSI EVO in the 8S Audi TT RS and 8V.5/8Y Audi RS3 delivers horsepower and torque gains throughout the powerband. On stock turbo vehicles with 4" inlets, dyno testing showed peak gains of up to 21 crank horsepower and 16 ft-lbs of torque. Note: For 2019+ models, the adapter kit 034-108-Z074 is additionally required.
Description
Product Description
This 4" carbon fiber closed-top cold air intake system was developed for the 2.5 TFSI EVO engine found in the 8S Audi TT RS and 8V.5/8Y Audi RS3. The goal of development was an intake solution that delivers measurable horsepower and torque gains over the well-designed factory airbox. After extensive iterations of design, prototyping, and testing, this precisely manufactured carbon fiber cold air upper intake system was the result.
Designed for Modularity
Analysis of the factory intake system showed that the largest flow restrictions were the filter membrane and the accompanying plastic accordion hose running to the turbocharger. The factory lower airbox and fresh air duct, however, were found to be suitable for most stage 1 and stage 2 setups with minor modifications. This led to the modular design shared by all X34 EVO intake systems, where the upper air filter system can be used with either the factory lower airbox and fresh air duct, or with the lower intake box and fresh air duct from this product line. This allows individual components to be replaced to eliminate the largest flow restrictions, while still leaving a path to upgrade to a higher-flow system later.
Maximizing Airflow
A CFD-optimized carbon fiber intake tube was developed as a direct replacement for the plastic factory accordion hose. Using CAD software and 3D scanning technology, the cross-sectional area of the intake tube was optimized while accounting for the available space constraints. The resulting part features smooth transitions that maximize airflow to the turbo inlet within the factory packaging limits.
Minimizing Intake Air Temperature
To ensure the system draws in cool, dense air, it includes a fully enclosed carbon fiber heat shield that replaces the upper airbox, along with a stainless steel heat shield that blocks heat from saturating the intake tube. The upper carbon fiber heat shield bolts to the factory lower airbox, allowing the high-flow conical filter to draw cold air from the factory inlet duct ahead of the radiator. The stainless steel heat shield bolts to the stock intake tube mounting point and to the back of the cylinder head, preventing heat from the exhaust header and turbocharger from radiating directly onto the intake tube. Together, both heat shields minimize pre-turbo intake air temperature.
4" Diameter for Maximum Performance
The factory 2.8" turbo inlet, which necks down further throughout the unit, becomes the largest restriction in the intake system once a performance filter is installed. This 4" diameter intake kit is designed to support upgraded 4" turbo inlets used on factory, hybrid, and full-frame turbochargers. It has been validated to work with the majority of aftermarket inlet options and is additionally optimized for an upcoming 4" turbo inlet.
Minimizing Unnecessary Filter Shrouding
A critical factor for a high-flowing intake is the ability for air to circulate freely around and into the filter. Restricted airflow around the filter limits flow regardless of filter size. Extensive testing was used to refine the enclosure design to allow maximum airflow surrounding the filter and through the filter media, resulting in the correct filter size matched to the correct housing size for maximum airflow and OEM-level filtration.
Performance Air Filter
The system houses a high-flow conical air filter with a double-layer pleated cotton filtration medium, providing increased flow through an enlarged filtration surface while maintaining strong filtration performance.
OEM+ Fit & Finish
The carbon fiber weave on the intake tube and upper heat shield was matched to the factory carbon fiber engine trim found in the TT RS & RS3 2.5 TFSI engine bay. The system was designed to fit like a factory component and mates directly to the turbo inlet pipe and factory lower airbox.
Dyno-Verified Horsepower & Torque Gains
Development was validated on multiple vehicles using a Mustang AWD dynamometer, confirming gains on both stock turbo vehicles and vehicles with upgraded turbo kits.
Peak Wheel Horsepower & Torque with Stage 2 E85:
- Stock Intake: 456 WHP / 430 WTQ
- X34 Intake: 472 WHP / 442 WTQ
- Peak Gains: 21 WHP / 16 WTQ @ 6,950 RPM
Product Features
- Fits both right-hand drive and left-hand drive configurations
- High-quality carbon fiber construction
- High gloss epoxy finish
- OEM+ fit and finish
- Dyno-proven horsepower and torque gains
- Increased engine and induction sounds
- Improved throttle response
- Large-diameter CFD-optimized intake tube
- Improved airflow over factory airbox and intake tube
- Reduced intake air temperature
- High-performance pleated cotton air filter
- Full 4" intake tube for upgraded turbo inlets
- Includes two high-temp silicone couplers for OE size or aftermarket 4" inlets
Early Non-US 8V.5 Fitment Note
- Very early non-US 8V.5 Audi RS3 vehicles are equipped with a heat shield that is not compatible with the included auxiliary stainless steel heat shield.
- The newer OE heat shield (part number 07K 129 597 G) is available through an Audi dealer. Once installed, the auxiliary heat shield included in this kit can also be fitted.
Emissions Disclaimer
- This product is sold for racing use as well as use on vehicles not registered for on-highway use and is not legal for use on emissions-controlled highway or street vehicles.
- Material
- Carbon
- Intake Tube Diameter
- 4"
- Surface Finish
- Hochglanz-Epoxid / High Gloss Epoxy
- Filter Media
- Doppellagige, gefaltete Baumwolle / Double-Layer Pleated Cotton
- Shipping weight
- 5.1 kg
- 07K 129 597 G
- X34 Carbon Fiber Closed-Top Upper Airbox
- X34 Carbon Fiber 4" Air Intake Tube
- Double-Layer Pleated Air Filter
- Stainless Steel Heat Shield
- Silicone Coupler
- Installation Hardware
- Xacto X75300 Precision Razor Saw Set
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com















