Germany

← Back to catalogue

X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L 034-108-1050
  • X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L 034-108-1050
  • X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L 034-108-1050
  • X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L 034-108-1050
  • X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L 034-108-1050
  • X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L 034-108-1050

X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L

Part number: 034-108-1050

Not listed by the manufacturer for your selected vehicle: BMW 5 Series F07/F10/F11 (2009-2017) N55 3.0L

€996.72

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

The X34 Carbon Fiber Cold Air Intake System delivers improved power, sound, and acceleration to BMW F2X/F3X B58 owners in a clean OEM+ package. Extensive evaluation of the factory airbox design resulted in a performance replacement that increases airflow to the turbocharger and engine. Installation effort: mild.

Description

Product Description

This comprehensive performance intake solution was developed for the BMW F2X/F3X B58. The X34 Carbon Fiber Cold Air Intake System offers measurable increases in horsepower and torque, sportier induction and turbocharger sounds, and a carbon fiber airbox design.

Throughout development, multiple designs were modeled, prototyped, and tested to ensure measurable performance benefits alongside superb fitment. The system uses a partially-enclosed airbox that retains the factory fresh air inlet duct and heat shield, housing a 3.5" inlet conical air filter. This filter is mounted to a CNC-machined velocity stack, which smooths the airflow and increases air velocity, enabling greater airflow through the matching CFD-optimized filter tube to the turbo inlet.

Minimizing Unnecessary Filter Shrouding

A critical factor in a high-flowing intake system is the ability for air to flow freely around and into the filter. If airflow around the filter is restricted, flow into the filter is limited as well. Many aftermarket kits fit an oversized filter into an enclosure that cannot accommodate it, choking the filter and reducing overall flow - often the result of optimizing for one variable at the expense of others.

Extensive testing and refinement of the intake design allow for maximum airflow surrounding the air filter, enabling optimal airflow to and through it. The result is a correctly sized filter in a correctly sized housing, delivering maximum airflow and performance while maintaining OEM-level filtration.

Maximizing Airflow

A CFD-optimized 4-ply silicone intake tube serves as a direct replacement for the factory plastic accordion/sound-deadening hose. Using CAD software and 3D scanning technology, the cross-sectional area of the intake tube was optimized within the factory space constraints. The resulting part features smooth transitions that ensure optimal airflow to the throttle body.

Performance Air Filter

The X34 Carbon Fiber Intake houses a high-flow conical air filter with a double-layer pleated cotton filtration medium, capable of trapping particles as small as 5 microns. The enlarged filtration surface offers increased flow while maintaining superior filtration. This air filter has been tested in applications over 800HP with minimal restriction and OEM-quality filtration.

While many intake kits leave the air filter unsupported and prone to movement, this system features a dedicated air filter support that prevents unwanted movement while allowing compliance to accommodate engine movement under varying load conditions. A stationary air shroud prevents rubbing against surrounding engine bay components, unlike many other designs on the market.

X34 Cold Air Intake System Features

  • Developed in-house
  • Improved airflow over factory airbox and intake tube
    • Stock Intake: 674 CFM (@ 28" H2O)
    • X34 Intake: 814 CFM (@ 28" H2O) - 21% Increase
  • High-quality carbon fiber airbox
  • Improved throttle response
  • High-gloss epoxy finish
  • Enhanced engine and induction sounds
  • Superb fit and finish matching the factory engine bay
  • Stealthy OEM+ design
  • High-flow conical air filter
  • CNC-machined billet aluminum velocity stack MAF housing
  • Large-diameter CFD-optimized turbo inlet hose
  • Installs securely using factory mounting points
  • Simple, straightforward installation

CFM Gains

CFM stands for cubic feet per minute of airflow - the higher this value, the more horsepower an intake can support. Testing is performed at 28" of water vacuum on a Superflow airflow bench, producing accurate and repeatable results.

  • Stock Intake: 674 CFM @ 28in H2O
  • X34 Intake: 814 CFM @ 28in H2O

Emissions Disclaimer

This product is sold for racing use as well as use on vehicles not registered for on-highway use and is not legal for use on emissions-controlled highway or street vehicles.

Air Filter Inlet Diameter
3.5 in
Filtration Rating
5 Mikrometer / 5 microns
Stock Airflow
674 CFM @ 28in H2O
X34 Airflow
814 CFM @ 28in H2O
Airflow Increase
21%
Airbox Material
Kohlefaser / Carbon Fiber
Finish
Hochglanz-Epoxid / High-Gloss Epoxy
Silicone Tube
4-lagig / 4-Ply
Shipping weight
4.4 kg

–

  • X34 Carbon Fiber Airbox
  • Billet MAF Housing Adapter
  • Silicone Hose
  • Billet Mounting Button
  • 3.5" Inlet High Flow Air Filter
  • Gold Heat Barrier Tape
  • Misc. Hardware
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products