Germany

← Back to catalogue

8V Audi RS3 X34 Carbon Fiber Air Intake System | 034-108-1010
  • 8V Audi RS3 X34 Carbon Fiber Air Intake System | 034-108-1010
  • 8V Audi RS3 X34 Carbon Fiber Air Intake System | 034-108-1010
  • 8V Audi RS3 X34 Carbon Fiber Air Intake System | 034-108-1010
  • 8V Audi RS3 X34 Carbon Fiber Air Intake System | 034-108-1010
  • 8V Audi RS3 X34 Carbon Fiber Air Intake System | 034-108-1010
  • X34 Carbon Fiber Air Intake System for 8V Audi RS3 Sportback | 034-108-1010

X34 Carbon Fiber Cold Air Intake System for 8V Audi RS3 2.5 TFSI (ROW, Non-USA)

Part number: 034-108-1010

€1,247.43

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Carbon fiber cold air intake system for the first-generation 8V Audi RS3 2.5 TFSI (iron block), designed exclusively for ROW (Non-USA) vehicles. Delivers horsepower and torque gains throughout the rev range, with peak gains of up to 14 crank horsepower and 10 ft-lbs of torque on stock turbo vehicles, and even greater gains with an upgraded turbocharger.

Description

Product Description

This carbon fiber cold air intake system was developed for the 8V Audi RS3 Sportback. Extensive engineering effort went into creating a complete intake solution for the first-generation 8V Audi RS3 (iron block) that provides horsepower and torque gains over the well-designed factory airbox. Multiple design iterations, prototypes, and tests led to this precisely manufactured carbon fiber intake system.

Maximizing Airflow

The CFD-optimized carbon fiber intake tube is a direct, high-performance replacement for the plastic factory accordion hose. Using CAD software and 3D scanning technology, the cross-sectional area of the intake tube was maximized while accounting for space constraints such as the factory high-pressure fuel pump and firewall. The result is a component with smooth airflow transitions that maximizes performance within the factory space constraints and ensures optimal airflow to the turbo inlet.

Minimizing Intake Air Temperature

To ensure the system draws in cool, dense air, a carbon fiber heat shield replaces the upper airbox. Bolting to the factory lower airbox, this heat shield allows the high-flow conical filter to draw cold air from the factory inlet duct ahead of the radiator. Both the carbon fiber heat shield and intake tube help isolate cold, dense intake air from engine bay heat.

Minimizing Unnecessary Filter Shrouding

A critical factor in a high-flowing intake system is the ability of air to flow freely around and into the filter. If airflow around the filter is restricted, overall flow into the filter is reduced. Many aftermarket kits fit an oversized filter into an enclosure too small to accommodate it, which chokes the filter and reduces its effective flow. Extensive testing and refinement resulted in a filter sized correctly for its housing, allowing maximum airflow around and through the filter while maintaining OEM-level filtration.

OEM+ Fit & Finish

The carbon fiber weave on the intake tube and upper airbox heat shield was selected to match the factory carbon fiber engine bay trim found on the 8V Audi RS3. The intake system was designed to fit like a factory component, mating directly to the turbo inlet pipe and factory lower airbox.

Dyno-Proven Horsepower & Torque Gains

Engineering and development were validated through dyno testing on a Dynojet dynamometer, confirming substantial horsepower and torque gains, even on stock turbo vehicles.

Peak Crank Horsepower & Torque with Stage 2:

ConfigurationHorsepowerTorque
Stock Intake440 HP543 ft-lbs
X34 Carbon Fiber Intake454 HP547 ft-lbs

Features

  • High-quality OEM+ carbon fiber construction
  • Increased airflow vs. factory airbox and intake tube
  • Dyno-proven horsepower and torque gains
  • Increased engine and induction sounds
  • Improved throttle response

Compatible Vehicles

  • 2015 – 2017 Audi RS3 2.5 TFSI (8V)
    • Only fits first generation (iron block) engine
    • Not for US models – fitment confirmed for ROW (Rest of World) vehicles only

Notice

This product is sold for racing use as well as use on vehicles not registered for on-highway use, and is not legal for use on highway or street vehicles.

Material (Intake Tube & Heat Shield)
Kohlefaser / Carbon Fiber
Stock Intake Output (Stage 2)
440 PS / 543 ft-lbs
X34 Intake Output (Stage 2)
454 PS / 547 ft-lbs
Peak Gain on Stock Turbo
14 PS / 10 ft-lbs
Shipping weight
3.9 kg

–

  • Carbon Fiber 8V Audi RS3 Air Intake Tube
  • Carbon Fiber 8V Audi RS3 Upper Airbox Heat Shield
  • Double-Layer Pleated Air Filter
  • Installation Hardware
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products