X34 Carbon Fiber Intake System, B9/B9.5 Audi A4/Allroad & A5 2.0 TFSI
Part number: 034-108-1051
Not listed by the manufacturer for your selected vehicle: Volkswagen Touareg Touareg III (2011+) 4.2L FSI
€1,013.76
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The X34 Carbon Fiber Intake System delivers improved power, sound, and acceleration to B9/B9.5 Audi A4/Allroad & A5 2.0 TFSI owners in a clean OEM+ package. Through extensive evaluation of the factory air duct and airbox designs, this performance replacement allows for increased airflow to the turbocharger and engine, offering measurable gains, simple bolt-on installation, and excellent fit and finish.
Description
Product Description
Significant effort went into developing this comprehensive performance intake solution for the turbocharged 2.0 TFSI engine found in the latest generation B9 Audi A4/Allroad & A5 2.0 TFSI. The X34 Carbon Fiber Intake System offers measurable increases in horsepower and torque, sportier induction and turbocharger sounds, and a carbon fiber airbox and inlet pipe design.
Throughout the development process, multiple designs were modeled, prototyped, and tested to ensure measurable performance benefits and superb fitment. The result is a partially enclosed airbox which uses the factory fresh air inlet duct and heat shield, while housing a 5" inlet conical air filter and a matching CFD-optimized silicone turbo inlet hose.
Minimizing Unnecessary Filter Shrouding
A critical component of a high-flowing performance intake is the ability for air to flow around and into the filter. If air cannot flow freely around the filter, it will be restricted from getting into it. Many aftermarket kits fit an oversized filter into an enclosure that cannot accommodate it, choking the filter and reducing its overall flow — often the result of engineering for one variable at the expense of others. Extensive testing refined the intake design to allow maximum airflow surrounding the air filter while achieving optimal airflow through it. The result is the right size filter in the right size housing, delivering maximum airflow and performance with OEM-level filtration.
X34 Cold Air Intake System Features
- Developed in-house by the engineering team
- Fits both left- and right-hand drive configurations
- High-quality carbon fiber airbox
- High-gloss epoxy finish
- 5" inlet conical pleated cotton air filter
- CNC-machined billet aluminum velocity stack
- Large-diameter CFD-optimized turbo inlet hose
- OEM+ fit and finish
- Dyno-proven horsepower and torque gains
- Improved airflow compared to factory airbox and intake tube
- Enhanced engine induction sounds
- Improved throttle response
- Reduced intake air temperature
- Secure installation using factory mounting grommets
- Simple, straightforward installation instructions
Dyno-Proven Performance Gains
The X34 Carbon Fiber Intake System is a free-flowing replacement for the factory airbox and turbocharger inlet hose. It yields a measurable reduction in pressure drop at the turbo inlet compared to the factory airbox, with a corresponding increase in horsepower and torque throughout the powerband.
Peak Horsepower & Torque
- Stock Intake: 253 Horsepower / 270 Foot-Pounds of Torque
- X34 Intake: 262 Horsepower / 274 Foot-Pounds of Torque
Peak Gains in Horsepower & Torque
- Peak Horsepower Gain: 10 HP @ 6,100 RPM
- Peak Torque Gain: 8 FT-LBS @ 6,100 RPM
Pressure Drop Reduction
- Stock Intake: Peak pressure drop of 0.58 PSI at 6,300 RPM
- X34 Intake: Peak pressure drop of 0.10 PSI at 6,300 RPM
Test Conditions: Dyno testing was performed on a stock 2017 Audi A4 2.0 TFSI using 91 octane fuel.
Performance Data Comparison
| Factory B9 Audi A4/A5 Airbox | X34 Cold Air Intake System | |
|---|---|---|
| Peak Horsepower | 253 HP | 262 HP |
| Peak Torque | 270 FT-LBS | 274 FT-LBS |
| Peak Horsepower Gains | 10 HP @ 6,200 RPM | |
| Peak Torque Gains | 8 FT-LBS @ 6,200 RPM | |
| Peak Pressure Drop at Turbo Inlet | 0.58 PSI | 0.10 PSI |
| Peak Pressure Drop Reduction | 0.48 PSI @ 6,300 RPM |
Fitment Note
We recommend visually verifying your intake system to ensure it does not have a MAF (mass airflow) sensor attached to the airbox. This intake system is only designed for vehicles without a MAF sensor attached directly to the factory airbox. Vehicles with a MAF sensor at the airbox require a different intake system.
Installation Effort
Medium
- Filter Inlet Diameter
- 5"
- Airbox Material
- Carbon
- Finish
- Hochglänzend, Epoxid
- Velocity Stack Material
- Aluminium, CNC-gefräst
- Turbo Inlet Hose Material
- Silikon
- Shipping weight
- 2.8 kg
–
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Res-X Resonator Delete, B9/B9.5 Audi A4/A5 & Allroad034-105-7044€270.17
Cast Stainless Steel Racing Catalyst, B9/B9.5 Audi A4/A5 & Allroad 2.0 TFSI034-105-4043€1,100.17
Dynamic+ Sway Bar Kit, B9/B9.5 Audi A4/S4, A5/S5/RS5, Allroad034-402-1012€865.28
Front Strut Brace, Billet Aluminum, B9/B9.5 Audi A4/S4, A5/S5/RS5, Allroad034-603-0012€626.76
Dynamic+ Lowering Springs for B9 Audi A4/Allroad034-404-1001€396.73
















