X34 Carbon Fiber MQB Cold Air Intake System, 8V Audi A3/S3/TT/TTS & MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3
Part number: 034-108-1005
€984.55
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete one-piece carbon fiber cold air intake system for the EA888 1.8T/2.0T Gen 3 engine in 8V/8S Audi A3/S3/TT/TTS and MkVII VW Golf/GTI/R and GLI. Dyno-proven crank gains of up to 15 hp and 12 ft-lbs on a stock vehicle, exceeding 30 hp and 25 ft-lbs on cars running Stage 1/2 software. Fully bolt-on installation with no extra parts required.
Description
Optimizing Airflow
Engineers identified the shortcomings of the factory intake system to determine which components restricted airflow to the turbocharger inlet. While the factory lower airbox and fresh air duct to the core support were sufficient for increased power levels, the factory air filter, upper airbox, and turbo inlet tube were found to be too restrictive, even with the factory turbocharger.
By scanning the factory engine bay, a one-piece unit was modeled to replace the factory intake tube and upper airbox. Eliminating the multiple couplers, transitions, and jagged features of the factory parts drastically reduced turbulence in the intake tract and virtually eliminated pressure drop before the turbo inlet.
Multiple prototypes were 3D-printed and thoroughly tested. The final design is a fully-enclosed unit feeding cold air to a 4" inlet at the air filter, connected to a large-diameter, one-piece intake tube with smooth transitions all the way to the factory turbo inlet.
Minimizing Unnecessary Filter Shrouding
A critical factor for a high-flowing intake system is the ability of air to circulate freely around the filter. Many aftermarket kits fit an oversized filter into an enclosure too small for it, shrouding the filter and reducing its overall flow. Extensive testing was conducted to size the filter and housing correctly, achieving maximum airflow around and through the filter while maintaining OEM-level filtration.
Performance Air Filter
The system houses a high-flow conical air filter with a 4" inlet and double-layer pleated cotton filtration medium, offering increased flow through an enlarged filtration surface while maintaining superior filtration.
OEM+ Fit & Finish
The carbon fiber weave on the intake tube and upper airbox heat shield was matched to the factory carbon fiber engine trim found in Audi RS-model engine bays. The system was designed to fit like a factory part, mating directly to the turbo inlet pipe and the factory lower airbox.
Dyno-Verified Wheel Horsepower & Torque Gains
Development was validated on multiple vehicles using a Mustang AWD dynamometer to confirm increases in horsepower and torque on both stock vehicles and vehicles with upgraded tunes.
Peak Wheel Horsepower & Torque, Stage 1, 2015 Volkswagen GTI:
- Stock Intake: 226 Wheel Horsepower / 296 Wheel Foot-Pounds of Torque
- X34 Intake: 235 Wheel Horsepower / 305 Wheel Foot-Pounds of Torque
- Peak Horsepower Gain: 31 WHP @ 6,000 RPM
- Peak Torque Gain: 27 WTQ @ 6,000 RPM
Peak Wheel Horsepower & Torque, Stock, 2016 Audi S3:
- Stock Intake: 232 Wheel Horsepower / 241 Wheel Foot-Pounds of Torque
- X34 Intake: 240 Wheel Horsepower / 248 Wheel Foot-Pounds of Torque
- Peak Horsepower Gain: 24 WHP @ 6,400 RPM
- Peak Torque Gain: 20 WTQ @ 6,400 RPM
Product Features
- Developed in-house by the engineering team
- One-piece design with high-quality carbon fiber construction
- OEM+ fit and finish, retains factory lower airbox and inlet duct
- Fully-enclosed design with large diameter 4" inlet pleated cotton air filter
- Large-diameter, CFD-optimized air intake tube
- Dyno-proven horsepower and torque gains
- Improved engine and induction sound
- Increased throttle response
- Improved airflow versus factory airbox and intake tube
- Compatible with SAI-equipped and non-SAI-equipped vehicles – no additional parts required
- Installs easily in minutes
Note: This product will not fit vehicles equipped with a MAF sensor. Confirm your vehicle does not have this sensor before ordering.
- Material
- Carbon
- Filter Inlet
- 4 Zoll
- Filter Media
- Doppellagige, gefaltete Baumwolle
- Shipping weight
- 3.6 kg
–
Audi (9)
Seat (5)
- Carbon fiber air intake system (one-piece)
- Double-layer pleated cotton air filter
- Integrated SAI adapter fitting
- Installation hardware
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
MQB Front Subframe Locking Collar Upgrade Kit, 8V/8V.5/8S Audi A3/S3/RS3 & TT/TTS/TTRS, Stainless Steel034-601-0028€193.51
Spherical Rear Trailing Arm Kit, Volkswagen & Audi MQB and MQB EVO034-401-1033€660.83
Billet Aluminum Rear Subframe Mount Inserts, Volkswagen & Audi MQB and MQB EVO AWD034-601-0032€187.43
Silicone Boost Hose Kit, MkVII Volkswagen GTI & Golf R, 8V Audi A3/S3/TT/TTS, MQB 2.0T Gen 3034-145-A059€266.52
Sway Bar End Link Pair, Motorsport, Front, Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-402-4002€399.19






