Germany

← Back to catalogue

X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3
  • X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3
  • X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3
  • X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3
  • X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3
  • X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3
  • X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3

X34 Carbon Fiber MQB Open-Top Cold Air Intake System, 8V Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R & MkVII VW GLI, 1.8T/2.0T Gen 3

Part number: 034-108-1020

€984.55

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

The X34 Carbon Fiber Open-Top Cold Air Intake System for 8V/8S Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R and MkVII VW GLI with 1.8T/2.0T Gen 3 engines lets more induction sound through thanks to its open-top design. Dyno testing shows gains of up to 15 crank horsepower and 12 ft-lbs of torque on a stock vehicle, and over 30 crank horsepower and 25 ft-lbs on vehicles running Stage 1/2 software. The one-piece carbon fiber unit bolts on directly with no additional parts required.

Description

Development & Design

This carbon fiber cold air intake system was developed for the EA888 1.8T/2.0T Gen 3 engines found in the 8V/8S Audi A3/S3/TT/TTS, MkVII VW Golf/GTI/R and MkVII VW GLI. The goal was an OEM+ solution that provides noticeable gains in horsepower and torque over the well-designed factory airbox. Multiple designs were modeled, prototyped, and tested throughout development.

Optimizing Airflow

Engineers began by identifying the shortcomings of the factory intake system to determine which components restricted airflow to the turbocharger inlet. While the factory lower airbox and fresh air duct to the core support were more than sufficient for increased power levels, the factory air filter, upper airbox, and turbo inlet tube were found to be too restrictive, even with the factory turbocharger.

The factory engine bay was scanned and a one-piece unit was modeled to replace the factory intake tube and upper airbox. By eliminating the multiple couplers, transitions, and jagged features of the factory parts, turbulence in the intake tract was drastically reduced and pressure drop before the turbo inlet was virtually eliminated. Multiple iterations were prototyped in plastic using an in-house FDM 3D printer and thoroughly tested. The best-performing design featured a 4" inlet at the air filter and a large-diameter one-piece intake tube with smooth transitions all the way back to the factory turbo inlet.

Minimizing Unnecessary Filter Shrouding

A critical component of a high-flowing performance intake is the ability for air to flow freely around and into the filter. If air cannot flow freely around the filter, flow into the filter is restricted. Many aftermarket kits fit an oversized filter into an enclosure that cannot accommodate it, choking the filter and reducing overall flow – often the result of optimizing for one variable at the expense of others. Extensive testing was conducted to refine the design and allow maximum airflow around the filter, resulting in the right size filter in the right size housing for maximum airflow with OEM-level filtration.

OEM+ Fit & Finish

The carbon fiber weave on the intake tube and upper airbox heat shield was selected to match the factory carbon fiber engine trim found in Audi RS-model engine bays. The included CNC-machined billet aluminum secondary air adapter and cap are black anodized for appearance and resistance to the elements. The system was designed to fit like a factory part and mates directly to the turbo inlet pipe and factory lower airbox.

Dyno-Verified Horsepower & Torque Gains

Development was validated on multiple vehicles using a Mustang AWD dynamometer to confirm substantial increases in horsepower and torque on both stock vehicles and vehicles running upgraded tunes.

Peak Wheel Horsepower & Torque, Stage 1, 2015 Volkswagen GTI:

  • Stock Intake: 226 Wheel Horsepower / 296 Wheel Foot-Pounds of Torque
  • X34 Intake: 235 Wheel Horsepower / 305 Wheel Foot-Pounds of Torque
  • Peak Horsepower Gain: 31 WHP @ 6,000 RPM
  • Peak Torque Gain: 27 WTQ @ 6,000 RPM

Peak Wheel Horsepower & Torque, Stock, 2016 Audi S3:

  • Stock Intake: 232 Wheel Horsepower / 241 Wheel Foot-Pounds of Torque
  • X34 Intake: 240 Wheel Horsepower / 248 Wheel Foot-Pounds of Torque
  • Peak Horsepower Gain: 24 WHP @ 6,400 RPM
  • Peak Torque Gain: 20 WTQ @ 6,400 RPM

Product Features

  • In-house developed one-piece design with high-quality carbon fiber construction
  • OEM+ fit and finish retains factory lower airbox and inlet duct
  • Black anodized CNC-machined billet aluminum secondary air adapter and cap
  • Open-top design for louder intake sound
  • Large-diameter 4" inlet with pleated cotton air filter
  • Large-diameter, CFD-optimized air intake tube
  • Dyno-proven horsepower and torque gains
  • Improved engine and induction sound
  • Increased throttle response
  • Improved airflow over factory airbox and intake tube
  • Compatible with SAI-equipped and non-SAI-equipped vehicles, no additional parts required
  • Installs in minutes

Note

This product does not fit vehicles equipped with a MAF sensor. Please confirm your vehicle does not have this component before ordering.

Intake tube/airbox material
Carbon
Filter inlet diameter
4 Zoll / 4"
Secondary air adapter material
CNC-gefrästes Aluminium, schwarz eloxiert
Filter type
Doppellagig, Baumwolle (Faltenfilter)
Shipping weight
4 kg

–

  • Carbon Fiber Open-Top Cold Air Intake System
  • Double-layer pleated cotton air filter
  • Integrated SAI adapter fitting
  • Installation hardware
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products