
1-Piece Rear Brake Rotor Upgrade Kit, MK8 VW GTI, Audi 8V/8V.5 S3/RS3 & Mk7/Mk7.5 Golf R & MK7/Mk7.5 VW GTI w/ Performance Pack
Part number: 034-301-2020
€446.64
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
These 1-piece rear brake rotors are a direct replacement for the MK8 VW GTI, Audi 8V/8V.5 S3/RS3, and Mk7/Mk7.5 Golf R and GTI with Performance Pack. Featuring directionally ventilated internal vanes, a high-strength CM-250 alloy, and a J-slot friction face, they manage brake heat more effectively than the factory straight-vane rotors at a fraction of the cost. Suited for daily driving, spirited street use, autocross, and light track days, they bolt directly to stock calipers and work with factory or upgraded pads. A Geomet anti-corrosion coating and temperature-indicating paint marks complete the package.
Description
Directional Cooling. Stronger Materials. Real Performance at a Fair Price
These 1-piece rotors deliver a meaningful braking upgrade for Audi and Volkswagen platforms without the cost of a two-piece system. Designed as a direct replacement for factory rotors, they combine advanced cooling technology, a high-strength alloy, and track-inspired features at a price point typically reserved for basic blank rotors.
Unlike factory rotors that rely on straight internal cooling vanes and soft iron alloys, these rotors are engineered from the inside out to manage heat more effectively and hold up under repeated braking events.
Directionally Ventilated for Active Cooling
Most OEM Audi and VW rotors utilize straight internal cooling vanes or no vanes at all, which create limited airflow and minimal active cooling effect. These rotors feature directionally ventilated internal vanes that pull air in from the center of the disc and force it outward. This increased airflow greatly improves heat transfer and cooling of the rotor, helping it stay cooler during hard street driving, spirited back roads, autocross, and light track use. Cooler rotors maintain braking consistency and reduce the likelihood of fade, warping, or hotspots.
High Strength CM-250 Alloy
Factory rotors are typically cast from relatively soft iron, which wears quickly and warps under high pressure and heat. These rotors use a heat-treated CM-250 special alloy formulated specifically for performance driving. This material is more resistant to heat cycling, less prone to warping, and better suited for repeated high-temperature braking than OEM rotors.
J-Slot Friction Face
The J-slot friction surface does more than just look aggressive. J-slots help clear debris from the pad surface, allow pad off-gassing under high temperatures, and distribute heat more evenly across the rotor face, reducing the likelihood of hot spots. This results in more consistent braking performance compared to traditional straight slots or drilled rotors, which can concentrate heat and increase the risk of cracking.
Street Friendly, Track Capable
These rotors are optimized for daily driving, spirited canyon runs, autocross, and entry-level track days. They are fully compatible with stock calipers and can be used with factory or upgraded performance pads. For more aggressive back-road use or extended track sessions, 2-piece rotors remain the ideal solution for the highest thermal demands.
Built for Year-Round Use
Each rotor is finished with a Geomet anti-corrosion coating to protect against rust, making them suitable for all weather conditions. Temperature-indicating paint marks on the rotor edge provide a visual reference for heat exposure during aggressive driving or track use.
Temperature-Indicating Paint Marks
These rotors feature temperature-indicating paint marks on the rotor edge that provide a quick visual reference for heat exposure during aggressive street driving, autocross, or track use. The paint changes color at specific temperature thresholds:
- Green → White at 478°C (892°F)
- Orange → Yellow at 571°C (1060°F)
- Red → White at 640°C (1184°F)
If the red paint turns white throughout, the rotors are consistently operating beyond their intended temperature range. This may indicate the need for lower-friction brake pads, improved cooling, or upgrading to 2-piece rotors, which have higher heat dissipation capabilities.
Performance That Makes Sense
These rotors are priced competitively with basic blank replacement rotors, while delivering meaningful improvements in cooling, durability, and braking consistency.
Brake Rotor Comparison Chart
| Feature / Use Case | Stock OEM Rotors | 1-Piece Rotors | 2-Piece Rotors |
|---|---|---|---|
| Direct OEM Fitment | ✓ | ✓ | ✓ |
| Internal Vane Design | Straight vanes | Directional vanes | Directional vanes |
| Active Cooling Efficiency | Low | High | Very High |
| Rotor Material | Soft OEM iron | CM-250 Special Alloy Rotor | CM-250 Special Alloy Rotor Rings |
| Heat Resistance | Low | High | Maximum |
| Warping Resistance | Low | High | Very High |
| Friction Face Design | Blank or drilled (platform dependent) | J-slotted Friction Face | J-slotted Friction Face |
| Pad Degassing & Debris Removal | Minimal | Excellent | Excellent |
| Corrosion Protection | Minimal | Geomet anti-corrosion coating | Type III Hard Anodizing & Geomet anti-corrosion coating |
| Temperature Indicators | No | Yes | Yes |
| Unsprung Weight Reduction | No | No | Yes |
| Rotor Ring Replaceable | No | No | Yes |
| Street Driving | ✓ | ✓✓✓ | ✓✓ |
| Spirited / Canyon Driving | Limited | ✓✓ | ✓✓✓ |
| Autocross | Not recommended | ✓✓ | ✓✓✓ |
| Track Use | No | Entry-level | Frequent / Aggressive |
| Typical Price Range | Low | Low to Moderate | High |
| Best For | Basic commuting | Best balance of performance & value | Maximum braking performance |
Features
- 310mm x 22mm Size
- OEM Fitment & Functionality
- CM-250 Special Alloy Designed Specifically To Reduce Warping from Hard Street Use
- J-Slot Slotted Friction Face
- Temperature Indicating Paint Marks on Rotor Edge:
- Green changes to white at 478°C (892°F)
- Orange changes to yellow at 571°C (1060°F)
- Red changes to white at 640°C (1184°F) – if the red paint turns white throughout, the rotors are running too hot
- Directionally Ventilated to Force Cooling Air Through the Brake Disc
- Heat Treated
- Geomet Anti-Corrosion Coating
Part Number Interchange
- 5Q0 615 601 E
- 1K0 698 601 N
- Diameter x Thickness
- 310mm x 22mm
- Material
- CM-250 Speziallegierung, wärmebehandelt
- Friction Face
- J-Slot genutet
- Surface Coating
- Geomet Korrosionsschutzbeschichtung
- Ventilation
- Richtungsbelüftete Innenkanäle
- Shipping weight
- 14.1 kg
–
Audi (14)
- A3 8V/8V.5 (2015-2020) 1.8 TFSI
- A3 8V/8V.5 (2015-2020) 2.0 TFSI
- A3 8P (2006-2013) 2.0 TSI
- A3 8P (2006-2013) 2.0T FSI
- A3 8P (2006-2013) 3.2L VR6 24V
- Q3 F3 (2018+) 2.0T Gen 3
- RS3 8Y (2022-2024) 2.5 TFSI EVO
- RS3 8V.5 (2017-2020)
- RS3 8V.5 (2017-2020) 2.5 TFSI EVO
- S3 8Y (2022-2024) 2.0T Gen 4
- S3 8V/8V.5 (2015-2020) 2.0 TFSI
- TT 8S (2016-2023) 2.0T Gen 3
- TTRS 8S (2016-2022) 2.5 TFSI EVO
- TTS 8S (2016-2023) 2.0T Gen 3
- 1-Piece Rear Rotor Pair
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ Camster Mount Pair, Volkswagen & Audi MQB and MQB EVO034-601-1023€520.87
Motor Mount Pair, Density Line, Volkswagen & Audi MQB and MQB EVO with 2.0T TFSI034-509-5020€429.60
Motorsport Stainless Steel Tow Hook - 105mm for Audi MQB/B8/B8.5/B9 and Volkswagen MQB034-605-0008€237.32
Billet Aluminum Upper & Lower Dogbone Mount Insert Pair, Volkswagen & Audi MQB And MQB EVO034-509-1022/25 & 034-509-6006/7€119.274 variants
Front Subframe Locking Collar Upgrade Kit, Volkswagen MK7/7.5 Golf/GTI/R & MK8 GTI/R034-601-0043€197.15
Spherical Rear Trailing Arm Kit, Volkswagen & Audi MQB and MQB EVO034-401-1033€660.83

