Germany

← Back to catalogue

Motor Mount Pair, Density Line, 8V/8S Audi A3/S3 & TT/TTS, MkVII Volkswagen Golf/GTI/R | 034-509-5020
  • Motor Mount Pair, Density Line, 8V/8S Audi A3/S3 & TT/TTS, MkVII Volkswagen Golf/GTI/R | 034-509-5020
  • Density Line Performance Engine/Transmission Mounts for 8V/8S Audi A3/S3/TT/TTS & Mk7 Volkswagen Golf/GTI/R | 034-509-5020
  • Density Line MQB Audi/Volkswagen Engine Mount vs. Factory EA888 1.8T/2.0T Gen 3 Mount Cutaway | 034-509-5020

Motor Mount Pair, Density Line, Volkswagen & Audi MQB and MQB EVO with 2.0T TFSI

Part number: 034-509-5020

Not listed by the manufacturer for your selected vehicle: Volkswagen Touareg Touareg II (2008-2010) 3.0L V6 TDI

€429.60

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Density Line engine and transmission mounts for Volkswagen and Audi models on the MQB and MQB EVO platform equipped with the 2.0T TFSI engine. The Street Density mounts deliver a noticeable gain in driving dynamics over the factory mounts while retaining everyday comfort.

Description

Product Description

These Density Line engine and transmission mounts are designed for Volkswagen and Audi vehicles on the MQB and MQB EVO platform equipped with the 2.0T TFSI engine. They are engineered to combine improved driving dynamics with everyday comfort, offering a noticeably more direct driving feel compared to the factory mounts without a significant trade-off in comfort.

The mounts feature a fluid-free design and are manufactured from high-durometer rubber, substantially improving performance and longevity over the factory mounts. By eliminating the slop inherent to the stock mounts, they reduce wheel hop, sharpen throttle response, and create a more direct, connected driving experience.

Street Density

The Street Density engine mount pair is manufactured from 50 and 60 durometer rubber, approximately 25% stiffer than stock. Since the mounts are also solid-filled, drivetrain movement is substantially reduced compared to the factory mounts.

This results in greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without a significant increase in noise, vibration, or harshness (NVH) in the cabin. These mounts are a completely re-engineered performance solution rather than simple inserts for the factory mounts.

Features

  • Manufactured from 50 and 60 durometer (Street Density) rubber with fluid-free construction
  • Reduced drivetrain slop
  • Decreased engine movement under load
  • More direct power transfer
  • Improved shifting feel
  • Complete drop-in replacement of factory engine/transmission mounts
  • Sold in pairs (one engine mount and one transmission mount)

High-Durometer Rubber vs. Polyurethane

These mounts use high-durometer rubber rather than polyurethane. While vulcanized rubber mounts are more costly to produce due to higher tooling costs and manufacturing complexity, rubber is inherently a better damping medium for mounts and bushings than polyurethane.

Rubber handles both tension and compression effectively, whereas polyurethane mounts rely on damping under compression only. Rubber also performs well in shear, where polyurethane is less effective, making it well suited for control arm bushings subjected to shear forces during suspension articulation.

Rubber packs and wears more slowly than polyurethane, resulting in a longer-lasting part with consistent performance and comfort.

Note: This Street Density application uses stiffer, less compliant rubber but retains a design and construction similar to the OEM mounts, so it is not intended for severe abuse. Driving dynamics are improved, but these mounts are not necessarily suited to more punishing use. Under normal spirited driving, they typically last up to 50,000 miles or more. More abusive use, such as aggressive drag racing, clutch dumps, hard shifting, or significant power increases, can cause premature wear or failure, often within 20,000 miles or less. For such demanding applications, the dedicated Motorsport mounts are recommended.

Replacing the motor mount bolts with new stretch bolts from the corresponding hardware kit is strongly recommended.

Material
Gummi, 50 und 60 Shore-Härte / Rubber, 50 and 60 Durometer
Construction
Flüssigkeitsfrei, vollmassiv / Fluid-free, solid-filled
Stiffness vs. stock
ca. 25 % steifer / approx. 25% stiffer
Shipping weight
4.4 kg

–

  • 1x Engine Mount
  • 1x Transmission Mount
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products