2-Piece Floating Front Brake Rotor 375mm Upgrade for Mk8 Golf R & Audi 8Y S3
Part number: 034-301-1012-RED/BLUBundle
€1,678.25
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete brake rotor and caliper carrier kit featuring 375x34mm rotors engineered to work with the factory front calipers on the Mk8 Golf R and Audi 8Y S3. At approximately 26.0lbs per rotor (about 1.3lbs lighter than the 27.3lb factory rotor), rotor diameter increases from 357mm to 375mm, with 72 directionally curved vanes driving strong airflow through the rotor. Available in Blue for Golf R and Red for Audi S3.
| Version | Part number | Price |
|---|---|---|
| Audi 8Y S3 - Red | 034-301-1012-RED/BLU: 034-301-1012-RED | €1,678.25 |
| VW Mk8 Golf R - Blue | 034-301-1012-RED/BLU: 034-301-1012-BLU | €1,678.25 |
Description
Product Description
This 2-piece floating front brake rotor upgrade, featuring 375x34mm rotors for the Mk8 Golf R and Audi 8Y S3, is a complete replacement rotor and caliper carrier kit designed to work with the factory front calipers. Upgrading to the larger rotor improves overall braking performance for street, track, and HPDE driving, keeping the brakes cool and strong throughout extended use.
At approximately 26.0lbs per rotor, rotational weight is reduced by about 1.3lbs per corner compared to the 27.3lb factory rotor, while rotor diameter grows from 357mm to 375mm. This combination increases stopping power while cutting rotational weight. Despite the weight reduction, the rotor retains sufficient thermal mass in the rings to properly absorb and dissipate heat.
The central hat of the rotor is machined from 6061-T6 aircraft-specification aluminum. The disc itself is built from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its form. The kit uses 72 directionally curved vanes, oriented specifically for each side of the vehicle, to force cool air through both rotors and dissipate heat evenly on both sides.
The rotor face features J-slot slotting to clean the pad surface of contaminants and allow hot pad outgassing.
The rotor and hat are connected through a floating mount system using high-strength alloy steel bobbins. These pins carry the braking loads while maintaining axial and radial float between hat and disc, allowing the rotor to safely expand and contract under heat.
Features
- Lightweight construction (26lb 375mm rotor vs. 27.3lb 357mm OE rotor)
- Includes replacement painted caliper carrier to accommodate the larger 375mm rotor
- Fits under most 18" wheel designs and OE wheels (18" wheels are a tight fit – always confirm proper clearance between caliper/bracket and wheel before driving; never grind or modify the caliper or bracket to force a fit)
- Floating, 2-piece design
- Aerospace-grade aluminum hats with Type III hard anodizing
- CM-250 special alloy rotor rings
- J-slot slotted friction face
- OEM fitment and functionality
- 72 curved vanes force cooling air through the brake disc
- Floating bobbin mounting system
- Replaceable rotor rings
- Lower long-term maintenance cost
Braking Performance Improvements
14 consecutive 60mph-0mph braking events were conducted, measuring the temperatures of all four brake rotors. From the factory, the same rotor is used on both sides of the S3 and Golf R, causing incorrect venting and cooling on one side, leading to a temperature differential of up to 80°F between the left and right rotors.
After installing the 2-piece brake rotor upgrade, both left and right rotors heat up more evenly across all 14 consecutive braking events. Thanks to increased thermal mass and improved cooling, these rotors stay nearly 140°F cooler than the factory rotors under similar testing conditions with the same brake pads.
What's Included
- 375x34mm 2-piece floating front rotor pair
- Caliper carrier conversion brackets (Red or Blue)
Please note: Type III hard anodizing of aluminum is a functional surface coating process. While color consistency is always the goal, slight variations may occur from batch to batch due to the nature of the anodizing process.
- Rotor Diameter
- 375 mm
- Rotor Thickness
- 34 mm
- Weight per Rotor
- ca. 11,8 kg (26,0 lbs)
- OE Rotor Diameter
- 357 mm
- OE Rotor Weight
- ca. 12,4 kg (27,3 lbs)
- Hat Material
- 6061-T6 Aluminium (Flugzeugbau-Spezifikation)
- Rotor Ring Material
- CM-250 Speziallegierung
- Number of Vanes
- 72
- Design
- Schwimmend, 2-teilig
–
Cupra (1)
Volkswagen (2)
- 375x34mm 2-piece floating front rotor pair
- Caliper carrier conversion brackets (Red or Blue)
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
X34 Carbon Fiber Fresh Air Duct, Volkswagen & Audi MQB and MQB EVO with 2.0T TFSI034-108-1009€537.92
Performance Drop-In Air Filter, Volkswagen & Audi MQB and MQB EVO with 2.0T TFSI034-108-B017€107.10
Billet Oil Filter Cap, EA888 Gen 3/4 2.0T Engines034-110-9000€153.34
Billet Aluminum Upper & Lower Dogbone Mount Insert Pair, Volkswagen & Audi MQB And MQB EVO034-509-1022/25 & 034-509-6006/7€119.274 variants









