Germany

← Back to catalogue

2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi 034-301-2006
  • 2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi 034-301-2006
  • 2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi 034-301-2006
  • 2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi 034-301-2006
  • 2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi 034-301-2006
  • 2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi 034-301-2006
  • 2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi 034-301-2006

2-Piece Floating Rear Brake Rotor 310mm Upgrade for MQB and MQB EVO VW & Audi

Part number: 034-301-2006

€1,240.12

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Complete rear brake rotor kit for MQB and MQB-EVO VW & Audi vehicles, engineered to work with the factory rear calipers. At roughly 5.1 kg per rotor, it saves about 1.7 kg of rotational weight compared to the factory 6.8 kg rotor, while retaining sufficient thermal mass in the ring and using 72 curved vanes to drive cooling air through the disc.

Description

Product Description

This 310 x 22 mm 2-piece floating rear brake rotor upgrade kit is a complete replacement set engineered to work with the factory rear calipers fitted on MQB and MQB-EVO VW & Audi vehicles.

At approximately 5.1 kg per rotor, this design cuts rotational weight by about 1.7 kg per corner compared to the factory 6.8 kg rotor. Despite the weight reduction, the rotor ring retains sufficient thermal mass to properly absorb and dissipate heat.

The central hat section is machined from 6061-T6 aircraft specification aluminum. The disc itself is manufactured from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its shape. Whereas the factory uses the same straight-veined rotor on both sides of the rear axle on MQB and MQB-EVO vehicles, this kit uses 72 directionally curved vanes that actively draw cooling air through the rotor. The rotors are left/right specific, providing a notable improvement in cooling efficiency over the factory design.

The rotor face features J-slot slots that clean the pad and surface of contaminants and allow hot pad outgassing, while keeping braking noise lower than with traditional slotted rotors.

The rotor and hat are joined by a floating mounting system using high-strength alloy steel bobbins. These pins carry the braking load while allowing axial and radial float between hat and disc, permitting safe expansion and contraction under heat.

Features

  • Lightweight construction (5.1 kg rotor vs. 6.8 kg OE Audi/VW rotor)
  • Floating, 2-piece design
  • Aerospace grade aluminum hats
  • CM-250 special alloy rotor rings
  • J-slotted friction face
  • OEM fitment and functionality
  • 72 curved vanes force cooling air through the brake disc
  • Left/right specific rotors for improved cooling (unlike OE)
  • Floating bobbin mounting system
  • Replaceable rotor rings
  • Lower long-term maintenance cost

OE Part Interchange

  • 5Q0 615 601 E
  • 1K0 615 601 N

What's Included

  • 310 x 22 mm left rotor
  • 310 x 22 mm right rotor
  • Installation and break-in instruction sheets

Please note: Type III hard anodizing of aluminum is a functional surface coating process. While color consistency is the goal, batch-to-batch variations may occur due to the nature of the anodizing process.

Diameter x Thickness
310 x 22 mm
Weight per Rotor
ca. 5,1 kg (11.30 lbs)
OE Rotor Weight
ca. 6,8 kg (15.00 lbs)
Hat Material
6061-T6 Aluminium
Rotor Ring Material
CM-250 Spezial-Legierung
Number of Vanes
72 gebogene Kühlrippen
Design
Schwimmend, 2-teilig
Shipping weight
13.4 kg

–

  • 310 x 22 mm left rotor
  • 310 x 22 mm right rotor
  • Installation and break-in instruction sheets
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products