Germany

← Back to catalogue

034Motorsport 8V Audi A3/S3 Quattro Lowering Spring Set | 034-404-1000
  • Performance 8V Audi A3/S3 Quattro Lowering Spring Set | 034-404-1000
  • 8V Audi A3/S3 Quattro Linear Lowering Springs | 034-404-1000
  • Lowered 2016 Audi S3 on 034Motorsport Springs | 034-404-1000
  • 8V Audi S3 on 034Motorsport Lowering Springs | 034-404-1000
  • Lowered MQB Audi S3 on 034Motorsport Springs | 034-404-1000
  • Dynamic+ Lowering Springs For 8V Audi A3/S3
  • Lowered MQB Audi S3 on 034Motorsport Springs | 034-404-1000

Dynamic+ Lowering Springs for 8V Audi A3/S3

Part number: 034-404-1000

Not listed by the manufacturer for your selected vehicle: Audi Q2 MQB (2017+) 1.8T

€396.73

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Dynamic+ Lowering Springs for the 8V Audi A3/S3 with Magnetic Ride combine a noticeable drop in ride height with improved handling dynamics while maintaining excellent ride quality. Developed specifically for vehicles equipped with Audi Magnetic Ride, they deliver precise vehicle control alongside OEM+ comfort levels.

Description

Product Description

These lowering springs are developed specifically for vehicles equipped with Audi Magnetic Ride. They are engineered to improve handling performance while delivering a high level of ride comfort. Designed as a no-compromise solution, they give the vehicle an aggressive yet functional stance and reward drivers with precise vehicle control along with OEM+ comfort levels.

These springs were thoroughly tested on the street and track on an R460 8V Audi S3, as well as by independent Audi enthusiasts prior to release.

Each set is manufactured in the USA at an ISO 9001 certified facility and tested to exacting specifications to ensure reliable performance for discerning Audi A3 and S3 owners.

Why Are Dynamic+ Coil Spring Sleeves Needed?

When designing these lowering springs, the goal is not simply to produce a shorter spring. A common misconception is that lowering springs have a shorter overall coil length. In reality, the spring is the same length as the OEM spring, but some of the coils are positioned closer together. These coils "stack" under load, producing the lowered ride height. Because the coils sit closer to one another, they can contact each other as the suspension compresses and decompresses.

This coil stacking effect is built into the design of most aftermarket lowering springs, aftermarket coilovers, and in some cases even OEM suspension, depending largely on the vehicle's original engineering.

In some cases, coil stacking under heavy compression can create additional noise. To address this, Coil Spring Sleeves are offered to dampen noise between the coils. Not every spring set requires these sleeves; where needed, a pair is included and pre-installed in the correct position.

Features

  • Improved handling performance
  • Excellent ride quality
  • Improved chassis dynamics
  • Reduced body roll and understeer
  • Compatible with Audi Magnetic Ride
  • Provides approximately 0.75" of lowering
  • Lightweight, high-strength construction
  • Coil Spring Sleeves included
  • Shot peened and powder coated
  • Made in the USA at an ISO 9001 certified facility

Ride Height

  • Front: approximately 0.75" lower
  • Rear: approximately 0.75" lower

Spring Rates

AxleSpring Rate
Front310 lbs/in (linear)
Rear400 lbs/in (linear)

Application Guide

  • 2015 – present Audi S3 (8V, MQB) – with Magnetic Ride
  • 2015 – 2016 Audi A3 (8V, MQB) – with Magnetic Ride
    • Note: Does not fit non-Magnetic Ride Audi A3 8V or 8V.5

Note: Using Density Line Bump Stops alongside these lowering springs is recommended.

Front lowering
ca. 0,75 Zoll (ca. 19 mm) / approx. 0.75 in
Rear lowering
ca. 0,75 Zoll (ca. 19 mm) / approx. 0.75 in
Front spring rate
310 lbs/in (linear)
Rear spring rate
400 lbs/in (linear)
Surface treatment
Kugelgestrahlt und pulverbeschichtet / Shot peened and powder coated
Manufacturing
USA, ISO 9001 zertifizierte Fertigung / USA, ISO 9001 certified facility
Shipping weight
8.3 kg

–

  • Lowering springs (front and rear set)
  • Coil Spring Sleeves (where required for the application, pre-installed)
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products