Density Line Bump Stops, Rear, 86mm
Part number: 034-403-Z004
€20.69
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Density Line Bump Stops restore usable shock travel lost when a vehicle is lowered. Their progressive compression profile delivers controlled, tuned suspension engagement that factory or trimmed bump stops cannot match.
Description
Engineered Travel, Tuned Damping, Improved Comfort
Lowering a vehicle typically reduces usable suspension travel. When the suspension reaches this limit too early, steering precision, ride comfort, and consistent tire contact all suffer. Density Line Bump Stops are designed to recover this lost travel. Their progressive characteristics cushion impacts smoothly and in a controlled manner, offering a level of performance that factory or trimmed bump stops cannot provide. The result is a more composed, predictable driving experience, particularly on lowered vehicles that depend on correctly tuned suspension geometry.
Why Suspension Travel Matters
On lowered vehicles, available suspension travel is reduced, causing the suspension to contact the factory bump stop much sooner than intended. This bump stop is designed by the OEM as a final-stage buffer, a rubber cushion that protects the shock and suspension components from bottoming out under heavy compression. At stock ride height, it only engages during hard impacts and functions as a safety and comfort feature rather than a load-bearing spring.
When the vehicle is lowered, this engineered clearance is reduced or eliminated. The shock then contacts the factory bump stop far more often and under lighter loads than intended. This turns the bump stop into an unintended secondary spring, restricting suspension movement, reducing its ability to absorb bumps, and preventing consistent tire loading. The result is a noticeable loss in ride quality, grip, and handling precision.
| Lowered on OEM Bump Stops | Lowered on Density Line Bump Stops |
|---|---|
Factory bump stops were never designed for lowered ride heights, and cutting them only increases harshness. |
Result: A controlled suspension that maintains grip and comfort instead of bottoming out. |
Precision-Tuned Compression Rate
Factory bump stops are designed for stock ride height and spring rates and reach their limits on lowered vehicles. Density Line Bump Stops are specifically engineered for lowered setups, particularly those running Dynamic+ Lowering Springs. Shape, size, and material density are matched to provide a progressive compression profile that acts like a small additional spring and damper unit. This keeps early travel smooth and comfortable while increasing firmness as the suspension nears full compression, resulting in controlled body motion, predictable handling, and improved ride quality without harshness.
Platform-Specific Engineering
Each Density Line Bump Stop is matched to its specific chassis to ensure optimal suspension performance. Vehicle-specific shapes and lengths restore suspension geometry and travel to near-factory levels after lowering. Compression rate and progression are tuned to complement Dynamic+ Lowering Springs, maintaining handling balance and consistent, predictable performance. The optimized length and compression characteristics allow the bump stop to work seamlessly with the rest of the suspension, rather than serving as a generic replacement part.
Why Not Just Cut the Factory Bump Stop?
Cutting factory bump stops may seem like a simple fix and has been a common practice for years. However, trimming gains a bit of travel at the cost of the carefully tuned final stage of suspension travel that keeps the suspension controlled. This results in harsh bottom-outs, unpredictable handling, and a setup that never feels fully composed.
Density Line Bump Stops are engineered from the ground up for lowered vehicles, providing the full range of motion the suspension requires with smooth, progressive control that cut OEM stops cannot match. More travel, more precision, no compromises.
| Cut Factory Bump Stops | Density Line Bump Stops |
|---|---|
|
|
Features
- Designed for lowered vehicles
- Improved handling and comfort
- Matched to Dynamic+ Lowering Springs
- Made from OEM-quality PUR (polyurethane) material
- Reduced height for more usable suspension travel on lowered vehicles:
- OE Height: 112mm
- Density Line Height: 86mm
- Increased durometer over OE for more effective compression limiting without excessive harshness:
- OE: 50A
- Density Line: 55A
Part Number Interchange
- 5Q0 511 358 D
What's Included
- 1 Pair of Bump Stops
- Material
- Polyurethan (PUR), OEM-Qualität
- Height (OE)
- 112 mm
- Height (Density Line)
- 86 mm
- Durometer (OE)
- 50A
- Durometer (Density Line)
- 55A
- Shipping weight
- 0.5 kg
–
Audi (16)
- A3 8Y (2022-2024) 2.0T Gen 4
- A3 8V/8V.5 (2015-2020) 1.8 TFSI
- A3 8V/8V.5 (2015-2020) 2.0 TDI
- A3 8V/8V.5 (2015-2020) 2.0 TFSI
- A3 8Y.5 (2025+) 2.0 TFSI
- RS3 8Y (2022-2024) 2.5 TFSI EVO
- RS3 8V.5 (2017-2020)
- RS3 8V.5 (2017-2020) 2.5 TFSI EVO
- RS3 8V (2015-2017) 2.5 TFSI
- RS3 8Y.5 (2025+) 2.5 TFSI
- S3 8Y (2022-2024) 2.0T Gen 4
- S3 8V/8V.5 (2015-2020) 2.0 TFSI
- S3 8Y.5 (2025+) 2.0 TFSI
- TT 8S (2016-2023) 2.0T Gen 3
- TTRS 8S (2016-2022) 2.5 TFSI EVO
- TTS 8S (2016-2023) 2.0T Gen 3
Volkswagen (34)
- Beetle Mk6 (2012-2019) 1.8T Gen3
- Beetle Mk6 (2012-2019) 2.0 TSI
- Beetle Mk6 (2012-2019) 2.0T Gen3
- Beetle Mk6 (2012-2019) 2.5L
- E-Golf Mk7/Mk7.5 (2015-2020) E-Golf
- EOS Mk5 (2006-2016) 2.0 TSI
- EOS Mk5 (2006-2016) 2.0T FSI
- EOS Mk5 (2006-2016) 3.2L VR6 24V
- Golf R & R32 Mk8 (2022-2024)
- Golf R & R32 Mk7/Mk7.5 Golf R (2015-2019)
- Golf R & R32 Mk8.5 (2025+)
- Golf/GTI/Rabbit Mk8 (2022-2024) 2.0T Gen 4
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 1.8T Gen3
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0 TDI
- Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0T Gen3
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TDI
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TSI
- Golf/GTI/Rabbit Mk6 (2010-2014) 2.5L
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0 TSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.0T FSI
- Golf/GTI/Rabbit Mk5 (2006-2009) 2.5L
- Golf/GTI/Rabbit Mk8.5 (2025+) 2.0 TFSI
- Jetta/GLI Mk6 (2011-2018) 1.4 TSI
- Jetta/GLI Mk6 (2011-2018) 1.8T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.0 TDI
- Jetta/GLI Mk6 (2011-2018) 2.0 TSI
- Jetta/GLI Mk6 (2011-2018) 2.0L 8V
- Jetta/GLI Mk6 (2011-2018) 2.0T Gen3
- Jetta/GLI Mk6 (2011-2018) 2.5L
- Jetta/GLI Mk5 (2005-2010) 2.5L
- Jetta/GLI Mk7 (2019+) 2.0T (Gen 3)
- Passat B6 (2006-2010) 2.0 TSI
- Passat B6 (2006-2010) 2.0T FSI
- Passat B6 (2006-2010) 3.6L VR6 FSI
- 1 Pair of Bump Stops
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com







