Dynamic+ Lowering Springs for Audi RS3 8V.5
Part number: 034-404-1008
Not listed by the manufacturer for your selected vehicle: Audi A4 B5 (1996-2001) 1.8T
€456.38
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Dynamic+ Lowering Springs for the Audi RS3 8V.5 improve handling while noticeably lowering the car without sacrificing ride comfort. Engineered specifically for vehicles equipped with Audi Magnetic Ride, they combine an aggressive stance with precise feedback and everyday comfort.
Description
Product Description
Developed specifically for vehicles equipped with Audi Magnetic Ride, Dynamic+ Lowering Springs improve handling performance while delivering excellent ride quality. Designed as a true no-compromise solution, they provide an aggressive yet functional stance and reward the driver with precise vehicle control and OEM+ comfort levels.
Dynamic+ Lowering Springs were thoroughly tested on the street and track on a 2018 Audi RS3 8V.5, as well as by independent Audi enthusiasts before release.
Each set is manufactured in the USA at an ISO 9001 certified facility and tested against defined specifications to ensure reliable performance for discerning RS3 owners.
Why Coil Spring Sleeves Are Needed
When engineering Dynamic+ Lowering Springs, the goal is not simply to produce a shorter spring. Contrary to a common misconception, the spring itself is the same overall length as the OEM spring, but some coils are positioned closer together so they "stack" under load, resulting in the lowered ride height. Because these coils sit physically closer to each other, they make more contact as the suspension compresses and extends.
This coil-stacking behavior is engineered into the majority of aftermarket lowering springs, aftermarket coilovers, and in some cases even OEM suspension, depending largely on the original engineering of the vehicle.
In some cases, this coil contact under heavy compression can create additional noise. For this reason, Coil Spring Sleeves are offered to dampen noise between coils. Not every set of Dynamic+ Lowering Springs requires these sleeves; where needed, they are included pre-installed in the correct location.
Features
- Improved handling performance
- Excellent ride quality
- Improved chassis dynamics
- Reduced body roll and understeer
- Coil Spring Sleeves included
- Compatible with Audi Magnetic Ride
- Approximately 1" of front lowering and 3/4" of rear lowering
- Lightweight, high-strength construction
- Shot peened and powder coated
- Made in the USA at an ISO 9001 certified facility
Ride Height
- Front: approximately 25mm (1.0") lower
- Rear: approximately 20mm (0.75") lower
Spring Rates
| Spring Model | Front | Rear |
|---|---|---|
| RS3 Lowering Springs | 350.0 lb/in | 450.0 lb/in |
| Stock with Mag-Ride | 333.8 lb/in | 367.3 lb/in |
| Stock without Mag-Ride | 326.6 lb/in | 404.0 lb/in |
Recommended Alignment
These track-focused alignment specs come from testing on an RS3 and are optimized for a very "loose" handling attitude with a lively rear end that leans towards oversteer. Caution should be used with these settings, as they can cause the car to over-rotate and spin, particularly during throttle-lift conditions while cornering:
- Front (Tires: 265/35-18 Michelin Sport Cup 2)
- Camber: -3.0 degrees per side (using camber-increasing strut mount set)
- Caster: 7.1 degrees (not adjustable)
- Toe: 0.6mm toe-in per side
- Rear (Tires: 245/40-18 Michelin Sport Cup 2)
- Camber: -1.5 degrees per side
- Toe: 0.8mm toe-in per side
The test vehicle also ran front and rear sway bars and the full line of spherical Motorsport components.
- Front lowering
- ca. 25 mm (1,0")
- Rear lowering
- ca. 20 mm (0,75")
- Front spring rate
- 350,0 lb/in
- Rear spring rate
- 450,0 lb/in
- Manufacturing
- USA, ISO 9001 zertifizierte Fertigung
- Finish
- Kugelgestrahlt und pulverbeschichtet
- Shipping weight
- 8 kg
–
- Lowering springs (set for all four wheels)
- Coil Spring Sleeves (pre-installed where required)
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com













