Germany

← Back to catalogue

Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride) 034-404-1012
  • Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride) 034-404-1012
  • Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride) 034-404-1012
  • Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride) 034-404-1012
  • Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride) 034-404-1012
  • Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride) 034-404-1012
  • Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride) 034-404-1012

Dynamic+ Lowering Springs for 8V Audi A3/S3 (Non-Magride)

Part number: 034-404-1012

Not listed by the manufacturer for your selected vehicle: Audi S7 C8 (2019+) 2.9 TFSI

€396.73

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Dynamic+ Lowering Springs for the 8V Audi A3/S3 without Magride are designed for those seeking to lower their vehicle and sharpen handling dynamics while retaining excellent ride quality. Engineered specifically for vehicles without Audi Magnetic Ride, they deliver an aggressive yet functional stance combined with precise vehicle control and OEM+ comfort.

Description

Product Description

These Dynamic+ Lowering Springs were developed specifically for the 8V Audi A3/S3 without Magride, improving handling performance while delivering superb ride quality. Designed as a no-compromise solution, they provide an aggressive yet functional stance and reward drivers with precise vehicle control alongside OEM+ comfort levels. During intensive long-term testing, no detriment to strut life or variance in ride quality was observed. The springs were engineered in-house and tested extensively before release to ensure the ideal balance of performance, comfort, and reliability.

Compared to competitors' lowering springs and more complex coilover systems, these Dynamic+ Lowering Springs represent a solution that balances cost, comfort, performance, and stance.

Each set is manufactured in the USA at an ISO 9001 certified facility and tested to exacting specifications to deliver reliable performance for the Audi A3 and S3 enthusiast.

Why Are Dynamic+ Coil Spring Sleeves Needed?

When designing these Dynamic+ Lowering Springs, the goal was not simply to produce a shorter spring. A common misconception is that lowering springs have a shorter overall coil length. In reality, the spring is the same length as the OEM spring, but some coils are positioned closer together, allowing them to "stack" under load and achieve the lowered ride height. Because the coils sit closer to one another, they can touch and move against each other as the suspension compresses and extends.

Coil stacking is a design feature found in most aftermarket lowering springs, aftermarket coilovers, and sometimes even OEM suspension, depending on the vehicle's engineering.

In some cases, coils stacking under heavy compression can create additional noise. For this reason, Dynamic+ Coil Spring Sleeves are offered to dampen noise between the coils. Not all Dynamic+ Lowering Springs require these sleeves; where needed, a pair is pre-installed in the appropriate location.

Features

  • Designed Specifically for Vehicles Without Magnetic Ride Suspension
  • Improved Handling Performance
  • Superb Ride Quality
  • Improved Chassis Dynamics
  • Reduced Body Roll & Understeer
  • Lightweight, High-Strength Construction
  • Shot Peened & Powder Coated
  • Made in USA at an ISO 9001 Certified Facility

Spring Rates

  • Front – 310 lbs/inch (linear)
  • Rear – 400 lbs/inch (linear)

Ride Height

  • Front – Approximately 0.75" lower
  • Rear – Approximately 0.75" lower

Application Guide

  • 2015–2020 Audi A3 8V/8V.5 2.0 TFSI – Non-Magride
  • 2015–2020 Audi S3 8V/8V.5 2.0 TFSI
  • Note: For vehicles with Magnetic Ride, different lowering springs are required.
Front Spring Rate
310 lbs/Zoll (linear)
Rear Spring Rate
400 lbs/Zoll (linear)
Front Ride Height Reduction
ca. 0,75 Zoll (ca. 19 mm)
Rear Ride Height Reduction
ca. 0,75 Zoll (ca. 19 mm)
Surface Treatment
Kugelgestrahlt und pulverbeschichtet
Manufacturing Location
USA, ISO 9001 zertifizierte Fertigung
Shipping weight
8.1 kg

–

  • Dynamic+ Lowering Spring Set
  • Spring Sleeves
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products