2-Piece Floating Front Brake Rotor Upgrade Kit for 8Y Audi RS3
Part number: 034-301-1017
Not listed by the manufacturer for your selected vehicle: BMW X6 Series G06 (2019-Present) B58 3.0L
€1,543.16
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete replacement brake rotor kit measuring 374mm x 36mm for the front axle of the 8Y Audi RS3, engineered to work with the factory front calipers. At approximately 28.0 lbs, the lightweight design retains sufficient thermal mass in the rotor ring and features improved metallurgy for heat absorption. 72 directionally curved cooling vanes force air through the rotor to dissipate heat effectively. Tested extensively in high-intensity motorsport events, this kit delivers a noticeable improvement in braking performance and thermal headroom for demanding street and track use.
Description
Product Description
This 374mm x 36mm 2-piece floating front brake rotor upgrade kit for the 8Y Audi RS3 is a complete replacement brake rotor kit, engineered to work flawlessly with the factory front calipers found on the 8Y Audi RS3.
Weighing approximately 28.0 lbs, the lightweight design retains proper thermal mass in the rotor ring and features improved metallurgy to adequately capture heat, while 72 directionally curved cooling vanes force cool air through the rotor to dissipate heat.
Advantages of J-Slot over Drilled Rotors
OEM drilled rotors are typically cast first and then drilled, which creates additional stress points that weaken structural integrity, making them more prone to cracking as they go through heat cycles and wear over time. To address this, a J-Slot design was chosen over a drilled design, which effectively clears contaminants from the pad and rotor surfaces and allows for hot pad outgassing without reducing the structural integrity of the rotor.
True 2-Piece Design
While Audi employs a 2-piece rotor design utilizing pins in which the rotor ring can slightly expand and contract relative to the rotor hat, the rotor ring is not fully floating. Additionally, the outer friction surface cannot be replaced individually, adding unnecessary cost to brake services.
This kit instead uses a high-strength steel bobbin-style floating 2-piece rotor design. This allows the rotor ring to "float" on the central hat while expanding and contracting, reducing the likelihood of cracks and rotor warpage in high-performance driving scenarios.
The central hat is crafted from 6061-T6 aircraft-grade aluminum, while the brake disc is made from a proprietary alloy able to withstand extreme braking temperatures while maintaining structural integrity. The high carbon content of the brake disc allows the rotor to absorb substantial heat and dissipate it quickly. 72 directionally curved cooling vanes improve thermal capacity by forcefully moving cool air through the rotor, with a profile specifically designed to improve heat dissipation compared to the OE vane design.
This kit has been thoroughly tested in high-intensity motorsport events, proven to significantly improve braking and thermal headroom for extreme performance street and track driving, making it a suitable replacement rotor for the 8Y RS3.
Features
- Lightweight construction (28.0 lbs) – same weight as OEM, but with improved metallurgy and thermal capacity
- Lightweight construction matching OEM rotor design elements
- Floating bobbins, 2-piece design with radial and lateral expansion capability (OE only allows radial expansion)
- Aerospace-grade aluminum hats
- CM-250 special alloy rotor rings designed for hard street and track use, where OE replacement rotors can warp
- J-slotted friction face
- OEM fitment and functionality
- 72 curved vanes force cooling air through the brake disc
- Floating bobbin mounting system
- Left/right specific rotors for better cooling, unlike OE
- Replaceable rotor rings, saving money over OEM replacement in the long run
- Lower long-term maintenance cost
Please Note: Type III hard anodizing of aluminum is considered a functional surface coating process. While color consistency is always the goal, color variations may occur from batch to batch due to the nature of the anodizing process.
Installation Effort: Mild
NVH Levels: None to Low
NVH is the measurement of how much noise, vibration, and harshness is transmitted into the vehicle cabin. Based on user feedback, these 2-piece brake rotors transfer none to low amounts of noise to the cabin. This is relative to the brake pad installed, as different pads produce different resonances when passing over the slots, which can sometimes create a slight whirring noise. These sounds result directly from the performance improvements: the J-slots release gas from under the brake pad, and the high-density directional cooling vanes move substantial air, resulting in audible airflow sounds. Installation of other suspension components can also affect perceived NVH. Since NVH is subjective, individual experiences may vary from the stated rating.
- Diameter
- 374 mm
- Rotor Thickness
- 36 mm
- Weight
- ca. 12,7 kg (28,0 lbs)
- Hat Material
- 6061-T6 Flugzeug-Aluminium
- Rotor Ring Material
- CM-250 Spezial-Legierung
- Cooling Vanes
- 72 gerichtete, gebogene Kühlrippen
- Design
- 2-teilig, schwimmend gelagert (Bobbin-Design)
- Friction Surface
- J-Slot
- Shipping weight
- 27.3 kg
–
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
High Output Ignition Coil EA8XX Engines034-107-2012-RED/YEL€76.67 – €613.3710 variants
Dynamic+ Camster Mount Pair, Volkswagen & Audi MQB and MQB EVO034-601-1023€520.87
Billet Aluminum Upper & Lower Dogbone Mount Insert Pair, Volkswagen & Audi MQB And MQB EVO034-509-1022/25 & 034-509-6006/7€119.274 variants
Adjustable MQB Solid Rear Sway Bar Upgrade for Audi RS3 8V/8V.5/8Y & Audi TTRS 8S034-402-1015€453.94
Spherical Motorsport Rear Sway Bar End Links, Volkswagen & Audi MQB & MQB EVO034-402-4019€378.49
Strut Mount Bearing, Volkswagen & Audi MQB and MQB EVO034-601-2002€70.59











