2-Piece Floating Front Brake Rotor Upgrade Kit for Audi B10 S5 (360x34mm)
Part number: 034-301-1027
Not listed by the manufacturer for your selected vehicle: Audi S3 8Y.5 (2025+) 2.0 TFSI
€1,399.55
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete 2-piece front brake rotor upgrade kit (360x34mm) for the Audi B10 S5, designed to work with the factory front calipers. At approximately 26.8 lbs per rotor, rotational weight drops by roughly 3.85 lbs per corner compared to the factory 30.65 lb rotor, while retaining sufficient thermal mass and using 72 directionally curved vanes for active cooling.
Description
Product Description
The 2-piece floating front brake rotor upgrade kit (360x34mm) for the Audi B10 S5 is a complete replacement rotor designed to work flawlessly with the factory front calipers. Upgrading the front rotors increases overall braking performance in street, track, and HPDE driving conditions, keeping the brakes cool and strong throughout the day.
Weighing approximately 26.8 lbs, each rotor reduces rotational weight by about 3.85 lbs per corner compared to the factory 30.65 lb rotor. While reducing weight, the rotor retains proper thermal mass in the ring to adequately capture heat, while 72 directionally curved vanes force cool air through the rotor to dissipate heat.
The central hat section is made from 6061-T6 aircraft specification aluminum. The disc itself is constructed from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its form.
The friction face uses J-slot slots to clear the pad and surface of contaminants and allow hot pad outgassing, while reducing overall braking noise compared to a traditionally slotted rotor.
The rotor and hat are joined through a floating mount system using high-strength alloy steel bobbins. These pins carry the load from braking while maintaining axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.
Directionally Ventilated for Active Cooling
Most OEM Audi and VW rotors use straight internal cooling vanes, which allow for limited airflow and minimal active cooling effect. These rotors feature directionally ventilated internal vanes that pull air in from the center of the disc and force it outward. This increased airflow improves heat transfer and cooling, helping the rotor stay cooler during hard street driving, spirited back-road use, autocross, and light track use. Cooler rotors maintain braking consistency and reduce the likelihood of fade, warping, or hotspots.
High-Strength CM-250 Alloy
Factory rotors are typically cast from relatively soft iron, which wears quickly and warps under high pressure and heat. These 2-piece rotors use a heat-treated CM-250 special alloy formulated specifically for performance driving. This material is more resistant to heat cycling, less prone to warping, and better suited to repeated high-temperature braking than OEM rotors.
J-Slot Friction Face
The J-slot friction surface is designed to do more than look aggressive. The slots help clear debris from the pad surface, allow pad off-gassing under high temperatures, and distribute heat more evenly across the rotor face, reducing the likelihood of hot spots. This results in more consistent braking performance compared to traditional straight slots or drilled rotors, which can concentrate heat and increase the risk of cracking.
Temperature-Indicating Paint Marks
These 2-piece performance brake rotors feature temperature-indicating paint marks on the rotor edge, providing a quick visual reference for heat exposure during aggressive street driving, autocross, or track use. The paint changes color at specific temperature thresholds:
- Green → White at 478°C (892°F)
- Orange → Yellow at 571°C (1060°F)
- Red → White at 640°C (1184°F)
If the red paint turns white throughout, the rotors are consistently operating beyond their intended temperature range, which may indicate the need for lower-friction brake pads or improved cooling.
Comparison: Stock C8 RS6/RS7 Rotor vs. 2-Piece Floating Rotor
| Feature / Use Case | Stock C8 RS6/RS7 Rotor | 2-Piece Floating Rotor |
|---|---|---|
| Rotor Design | Semi-floating 2-piece rotor | Floating 2-piece rotor |
| Internal Vane Design | Incorrect directional vanes | 72 directional curved vanes |
| Cooling Efficiency | Moderate | Very high |
| Rotor Material | OEM cast iron | CM-250 special alloy |
| Hat Construction | Integrated iron hat | 6061-T6 aerospace aluminum hat |
| Weight | 24.7 lb OE rotor | 22.7 lb lightweight rotor |
| Heat Resistance | Good | Maximum |
| Warping Resistance | Moderate | Very high |
| Friction Face Design | OEM drilled face | J-slotted friction face |
| Pad Degassing & Debris Removal | Moderate | Excellent |
| Floating Hardware | No | Yes – floating bobbin system |
| Replaceable Rotor Rings | No | Yes |
| Long-Term Maintenance Cost | Higher full rotor replacement cost | Lower replacement ring cost |
| Street Driving | ✓✓ | ✓✓✓ |
| Spirited / Canyon Driving | ✓ | ✓✓✓ |
| Autocross / HPDE | Limited | ✓✓✓ |
| Frequent Track Use | Not ideal | Designed for it |
| Best For | Daily driving & occasional spirited use | High-performance street & track driving |
- Diameter
- 360mm
- Rotor Thickness
- 34mm
- Weight per Rotor
- ca. 26,8 lbs
- Hat Material
- 6061-T6 Aluminium
- Rotor Ring Material
- CM-250 Speziallegierung
- Internal Venting
- 72 gerichtet gekrümmte Kühlrippen
- Friction Face Design
- J-Slot
- Mounting System
- Schwimmend, hochfeste Stahlbolzen (Bobbins)
- Shipping weight
- 12.2 kg
–
Audi (1)
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com











