Density Line Bump Stops, Rear, 81mm
Part number: 034-403-Z002
Not listed by the manufacturer for your selected vehicle: Seat Leon Mk4 (2020+)
€25.56
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
These bump stops are engineered to restore suspension travel lost through lowering. Their progressive design delivers controlled damping, improved handling precision, and noticeably better ride comfort compared to factory or trimmed bump stops.
Description
Engineered Travel for Greater Control and Comfort
Lowered vehicles lose a portion of their usable suspension travel, causing the suspension to reach the factory bump stop much sooner than intended. In stock form, this bump stop acts as a final-stage buffer, protecting the shock and suspension from bottoming out during hard compression, and is only meant to engage during extreme impacts. Once a vehicle is lowered, this factory bump stop often engages under much lighter loads, turning into an unintended secondary spring. This restricts suspension movement, reduces the suspension's ability to absorb bumps, and prevents the tire from maintaining consistent load, leading to a noticeable loss of ride quality, grip, and handling precision.
Lowered on OEM Bump Stops
- The suspension stops absorbing bumps
- The tire loses consistent load and grip
- Handling becomes unpredictable
- Ride quality becomes harsh and abrupt
Factory bump stops were never engineered for lowered ride heights, and cutting them only amplifies harshness.
Lowered on Density Line Bump Stops
- Restores usable shock travel on lowered vehicles
- Keeps the suspension operating in its intended range
- Improves chassis balance and stability
- Enhances comfort by allowing the shock, not the bump stop, to manage impacts
Result: A poised, controlled suspension that maintains grip and comfort instead of bottoming out.
Precision-Tuned Compression Rate
Factory bump stops are designed for stock ride heights and spring rates, which often falls short on a lowered vehicle. These bump stops are engineered specifically for lowered setups, particularly those running Dynamic+ Lowering Springs. Each unit is shaped, sized, and density-matched to provide a progressive compression profile that acts like a miniature spring and damper, allowing smooth early travel while increasing firmness as the suspension approaches full compression. The result is controlled body motion, predictable handling, and improved ride quality without harshness.
Platform-Specific Engineering
Each Density Line Bump Stop is designed to match its specific chassis, ensuring optimal suspension performance. Vehicle-specific shapes and lengths restore suspension geometry and travel to near-factory levels even after lowering. Compression rate and progression are tuned to complement Dynamic+ Lowering Springs, maintaining handling balance while providing consistent, predictable performance. The optimized length and compression characteristics ensure the bump stop works seamlessly with the rest of the suspension.
Why Not Just Cut the Factory Bump Stop?
Cutting factory bump stops may appear to be a quick fix and has been a common practice for years. However, trimming sacrifices the carefully tuned final phase of suspension travel that keeps the ride controlled, resulting in harsh bottom-outs and unpredictable handling.
These bump stops are designed from the ground up for lowered vehicles, delivering the full range of motion the suspension needs with smooth, progressive control that cut OEM stops cannot match.
Cut Factory Bump Stops
- Not engineered for lowered ride heights
- Harsh, abrupt engagement
- Minimal tuning for compression or damping
- Reduced comfort and poor control
Density Line Bump Stops
- Engineered compression profile
- Progressive and smooth engagement
- Increased usable travel and improved control
- Maintains stability under load
- Dramatically improved ride comfort
- Ideal complement to Dynamic+ Lowering Springs
Features
- Designed for lowered vehicles
- Improves handling and comfort
- Matched to Dynamic+ Lowering Springs
- Made from OEM-quality PUR (polyurethane) material
- Reduced height helps maintain full suspension movement on lowered vehicles:
- OE Height: 102mm
- 034 Height: 81mm
- Increased durometer over OE for more effective compression limiting without becoming overly harsh:
- OE: 50A
- 034: 55A
Part Number Interchange
- 8W0 512 131 G
What's Included
- 1 pair of bump stops
- Material
- Polyurethan (PUR), OEM-Qualität
- Height (OE)
- 102 mm
- Height (034)
- 81 mm
- Durometer (OE)
- 50A
- Durometer (034)
- 55A
- Part Number Interchange
- 8W0 512 131 G
- Shipping weight
- 0.5 kg
–
Audi (12)
- A4 B9/B9.5 (2017-2025) 2.0 TFSI
- A5 B9/B9.5 (2018-2025) 2.0 TFSI
- A6 C8 (2019+) 2.0 TFSI
- A6 C8 (2019+) 3.0 TFSI
- A7 C8 (2019+) 3.0 TFSI
- Allroad B9 (2017+) 2.0 TFSI
- Allroad C8 (2019+) 3.0T TFSI
- S4 B9/B9.5 (2017-2025) 3.0 TFSI
- S5 B9/B9.5 (2018-2025) 3.0 TFSI
- S5 B10 (2025+) 3.0 TFSI
- S6 C8 (2019+) 2.9 TFSI
- S7 C8 (2019+) 2.9 TFSI
- 1 Pair of Bump Stops
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ Coil Spring Sleeves034-404-Z001€19.47
Dynamic+ Lowering Springs for B9 Audi A4/Allroad034-404-1001€396.73
Transmission Mount Insert, B9/B9.5 Audi A4/S4, A5/S5/RS5, Q5/SQ5, Allroad, C8 RS6/RS7, 4M.5 SQ7/SQ8, & D5 A8/S8, Billet Aluminum034-509-4053€110.75
Motor Mount, Street Density, B9/B9.5 Audi S4/S5/SQ5 3.0 TFSI, RS4/RS5 2.9 TFSI, & 4M/4M.5 Q7 3.0 TFSI034-509-5041€584.16



