Dynamic+ Lowering Springs for B9/B9.5 Audi RS5
Part number: 034-404-1017
Not listed by the manufacturer for your selected vehicle: Audi Allroad C5 (2001-2005) 2.7T
€396.73
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Dynamic+ Lowering Springs for the Audi RS5 (B9/B9.5) lower the vehicle and sharpen handling dynamics while maintaining a high level of ride comfort. Their specifically tuned spring rates and dual-rate design deliver a balanced combination of stance, handling, and everyday usability.
Description
Dynamic+ Lowering Springs were thoroughly evaluated on the street and track on the B9 Audi RS5 Coupe development vehicle, as well as by independent Audi enthusiasts, prior to release. The selected spring rates, unique dual-rate spring design, and ride height reflect months of testing — thousands of miles of daily driving and numerous track days — resulting in a lowering kit precisely matched to the factory dampers.
Extensive testing and research determined that the RS5's handling characteristics and weight distribution called for a more specific lowering spring with optimized spring rates.
From the factory, the RS5's DRC (Dynamic Ride Control) suspension tends to feel “floaty” in Comfort mode and overly stiff or bouncy in Dynamic mode. The Dynamic+ Lowering Springs are engineered specifically for the B9 Audi RS5 to transform ride quality and handling characteristics and enhance the overall driving experience. Each set is manufactured in the USA at an ISO 9001-certified facility and tested to exacting specifications to ensure consistent handling performance.
Why Are Dynamic+ Coil Spring Sleeves Needed?
Dynamic+ Lowering Springs are not simply shortened versions of the factory spring. While it may seem that overall coil length is reduced, the spring is actually the same length as the OEM unit — certain coils are instead positioned closer together, allowing them to "stack" under load and produce the lowered ride height. Because these coils sit closer together, they can make contact as the suspension compresses and extends.
This coil-stacking design is common to most aftermarket lowering springs and coilovers, and in some cases even to OEM suspension, depending on how the vehicle was originally engineered.
Under heavy load, coil stacking can occasionally generate additional noise. To address this, Coil Spring Sleeves are used where needed to dampen noise between coils. Not every Dynamic+ Lowering Spring requires these sleeves; where they are needed, a pre-installed pair is included with the spring set in the appropriate location.
Features
- Improved handling performance and chassis dynamics
- OEM sports car ride quality
- Spring sleeves included
- Reduced body roll and understeer
- Excellent comfort and ride quality
- Compatible with Audi Sport adaptive damping suspension
- Lightweight, high-strength construction
- Shot-peened and powdercoated
- Made in the USA at an ISO 9001-certified facility
Ride Height
- Front: approximately 0.75" lower
- Rear: approximately 0.75" lower
Effective Spring Rates
| Axle | Dynamic+ Spring Rate | OE Spring Rate |
|---|---|---|
| Front | 400 lbs/in | 357 lbs/in |
| Rear | 400 lbs/in | 345 lbs/in |
Fitment
- 2018–present Audi RS5 Coupe (B9/B9.5)
- 2018–present Audi RS5 Sportback (B9/B9.5)
Note: The rear bump stop must be trimmed by 15mm for optimal handling performance.
Installation Note: On the rear suspension, only the bottom spring perch has an indexing provision. Locate the bottom of the spring using the indexing peg.
- Front Lowering
- ca. 19 mm (0,75 Zoll)
- Rear Lowering
- ca. 19 mm (0,75 Zoll)
- Front Spring Rate
- 400 lbs/in
- Rear Spring Rate
- 400 lbs/in
- OE Front Spring Rate
- 357 lbs/in
- OE Rear Spring Rate
- 345 lbs/in
- Surface Treatment
- kugelgestrahlt und pulverbeschichtet
- Manufacturing Location
- USA, ISO 9001 zertifizierte Fertigung
- Shipping weight
- 11.4 kg
–
Audi (1)
- Dynamic+ Lowering Springs (set of 4)
- Coil spring sleeves (pre-installed where required)
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ Sway Bar Kit, B9/B9.5 Audi A4/S4, A5/S5/RS5, Allroad034-402-1012€865.28
Dynamic+ Billet Adjustable Front Sway Bar End Links For Audi B8/B9, C7/C8, 4M.5, 4M8 & Porsche 95B Chassis034-402-4033€188.64
Dynamic+ Billet Adjustable Rear Sway Bar End Links, Audi B9/B9.5, C8, 4M, 4M8 Chassis034-402-4029€276.26











