Germany

← Back to catalogue

Dynamic+ Lowering Springs for B9 Audi S4 | 034-404-1005
  • 2018 Audi S4 Lowering Springs | 034-404-1005
  • Lowered B9 Audi S4 on Dynamic+ Springs by 034Motorsport | 034-404-1005
  • B9 Audi S4 with 034Motorsport Dynamic+ Lowering Spring Kit | 034-404-1005
  • Lowered 2018 Audi S4 on Dynamic+ Springs by 034Motorsport | 034-404-1005
  • Dynamic+ Lowering Springs for B9 Audi S4 | 034-404-1005
  • 2018 Audi S4 at Laguna Seca Raceway Testing Dynamic+ Lowering Springs | 034-404-1005
  • B9 Audi S4 at Laguna Seca Raceway Testing Dynamic+ Lowering Springs | 034-404-1005
  • Dynamic+ Lowering Springs for B9 Audi S4 | 034-404-1005
  • Dynamic+ Lowering Springs for B9 Audi S4 | 034-404-1005

Dynamic+ Lowering Springs for B9/B9.5 Audi S4/S5

Part number: 034-404-1005

Not listed by the manufacturer for your selected vehicle: Seat Leon MQB (2012-2020) 1.8T

€419.87

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Dynamic+ Lowering Springs for the B9/B9.5 Audi S4/S5 lower ride height while sharpening handling and preserving excellent ride quality. Their dual-rate design delivers an aggressive yet functional stance alongside precise vehicle control and OEM+ level comfort.

Description

Product Description

Dynamic+ Lowering Springs were thoroughly evaluated on the street and track on the B9 Audi S4 development vehicle, and by independent Audi enthusiasts before release. The selected spring rates, unique dual-rate spring design, and ride height are the result of months of testing — thousands of miles of commuting and countless track days — matched to the factory dampers.

Each set of Dynamic+ Lowering Springs is manufactured in the USA at an ISO 9001 certified facility and tested to exacting specifications to deliver a high level of handling performance. These springs are a suitable suspension solution for Audi S4 owners who want to lower their vehicle and enhance the driving experience.

Why Are Dynamic+ Coil Spring Sleeves Needed?

Dynamic+ Lowering Springs are not simply a shorter version of the factory spring. Contrary to a common assumption, the overall coil length matches the OEM spring; however, some coils are positioned closer together and "stack" under load, producing the lowered ride height. Because these coils sit physically closer to one another, they come into greater contact as the suspension compresses and extends.

This coil stacking is a design characteristic found in most aftermarket lowering springs, aftermarket coilovers, and sometimes even OEM suspension, depending on the vehicle's engineering.

In some cases, this stacking under heavy compression can create additional noise. For springs where this applies, Coil Spring Sleeves are included to dampen noise between coils. Not all Dynamic+ Lowering Springs require these sleeves; where needed, a pair is included pre-installed in the correct location.

Features

  • Approximately 0.9" of lowering with a functional, balanced stance — no reverse rake
  • Improved handling performance and chassis dynamics
  • Reduced body roll and understeer
  • Strong ride comfort and quality
  • Compatible with Audi Sport adaptive damping suspension
  • Lightweight, high-strength construction
  • Shot peened and powdercoated
  • Made in the USA at an ISO 9001 certified facility

Ride Height

  • Front — approximately 0.9" lower
  • Rear — approximately 0.9" lower

Effective Spring Rates

  • Front — 400 lbs/inch
  • Rear — 480 lbs/inch

Fitment

  • Audi S4 (B9/B9.5), 2017 to present
  • Audi S5 (B9/B9.5), 2017 to present
  • Please note: Dynamic+ Lowering Springs are compatible with both standard suspension and Audi Sport adaptive damping suspension.
  • Installation note: On the rear suspension, only the bottom spring perch has an indexing provision. Locate the bottom of the spring using the indexing peg. Any perceived indexing on the upper mount is merely an impression left in the rubber by the old spring, with no functional purpose.
Front Lowering
ca. 0,9 Zoll / approx. 0.9 in
Rear Lowering
ca. 0,9 Zoll / approx. 0.9 in
Effective Spring Rate Front
400 lbs/Zoll
Effective Spring Rate Rear
480 lbs/Zoll
Surface Treatment
Kugelgestrahlt und pulverbeschichtet / Shot peened and powdercoated
Manufacturing Location
USA, ISO 9001 zertifizierte Fertigung / USA, ISO 9001 certified facility
Shipping weight
11.1 kg

–

–

Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products