Camber Shim Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10)
Part number: 034-401-Z069Bundle
Not listed by the manufacturer for your selected vehicle: Volkswagen Golf R & R32 Mk8 (2022-2024)
€149.69 – €440.55
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
This shim kit allows for the easy addition of negative camber on the Audi Gen 1 & 1.5 R8. As a modular system, it spaces out the lower control arm on the front and rear suspension, extending the adjustable camber range beyond factory levels for improved turn-in and cornering grip.
| Version | Part number | Price |
|---|---|---|
| 8 Shims | 034-401-Z069: 034-401-Z069-8 | €149.69 |
| 16 Shims | 034-401-Z069: 034-401-Z069-16 | €275.04 |
| 32 Shims | 034-401-Z069: 034-401-Z069-32 | €440.55 |
Description
Product Description
This camber shim kit for the Audi R8 Gen 1 & 1.5 allows for the easy addition of negative camber. Each shim adds to the maximum adjustable camber range by spacing out the lower control arm on the front and rear suspension, improving both turn-in and cornering grip.
By adding negative camber to the R8, turn-in and mid-corner grip are substantially improved as lateral tire grip is maximized. This extra grip allows for increased cornering speeds, whether diving into a tight corner on track or during spirited backroad driving, thanks to the added confidence in grip and lateral g-force the vehicle can develop.
As cornering loads increase, so does tire distortion and body roll. The combination of these two factors increases the load on the outer half of the tire. Increasing static negative camber counteracts this, allowing the tire's contact patch to be optimized at maximum cornering load, resulting in improved traction and tire wear.
From the factory, the Audi R8 uses a double-wishbone suspension front and rear, with an upper and lower control arm connecting the wheels to the vehicle. Camber at both axles is controlled via the lower control arm and has a limited factory range of approximately 1.3°. The shims are installed between the lower control arm and the vehicle frame, extending the overall camber range. Up to two shims can be installed per lower control arm bolt point, allowing adjustability of up to -4.3° negative camber in the front* and -3.5° in the rear.
*Measurements taken on a development vehicle with lowering springs installed; exact camber range may vary.
Features
- Changes the overall camber range – camber gains are only guaranteed if the vehicle is aligned accordingly
- Each shim adds approximately -0.7° in the front and -0.5° in the rear
- Shims are precision laser cut from aluminum plate
- Can be installed with the car loaded on an alignment rack – remove only one bolt at a time
- New Grade 12.9 M8x1.25x30 bolts and washers are included
- Note: Staggering shims in the front suspension does not add caster
- Note: Loctite is required on the new bolts (torqued to 30 Nm)
Camber Shim Ranges*
| Front | ||
|---|---|---|
| Shims Installed | Min | Max |
| 0 (Stock) | -1.5° | -2.8° |
| 1 | -2.2° | -3.5° |
| 2 | -3.0° | -4.3° |
| Rear | ||
| 0 (Stock) | -1.1° | -2.5° |
| 1 | -1.6° | -3.1° |
| 2 | -2.3° | -3.5° |
*Note: Total range may vary depending on whether the vehicle is at stock height or lowered. The measurements above were collected with Dynamic+ lowering springs installed.
What's Included
- 034-401-Z069-8: 1 shim stack, front or rear – 8 shims (16 bolts and washers)
- 034-401-Z069-16: 1 shim stack, front and rear – 16 shims (32 bolts and washers)
- 034-401-Z069-32: 2 shim stacks, front and rear – 32 shims (32 bolts and washers)
Recommended Alignment
The following track-use alignment specs produce a very "loose" handling attitude with a lively rear end that tends towards oversteer. Caution should be used, as these specs can cause the car to over-rotate and spin, particularly during throttle-lift conditions while turning:
- Front (Tires: 255/35/19 Michelin Sport Cup 2)
- Camber: -2.2° each side (via camber shims)
- Caster: 6.0° each side (not adjustable)
- Toe: 2.2 mm toe-in
- Rear (Tires: 315/30/19 Michelin Sport Cup 2)
- Camber: -2.4° each side (via camber shims)
- Toe: 2.0 mm toe-in (via adjustable toe arms)
The test vehicle was also equipped with front and rear sway bars, Dynamic+ lowering springs, and a full set of spherical motorsport suspension bushings.
- Material
- Aluminium, lasergeschnitten
- Bolt Size
- M8x1,25x30
- Bolt Grade
- 12.9
- Torque Spec
- 30 Nm
- Camber Gain per Shim (Front)
- ca. -0,7°
- Camber Gain per Shim (Rear)
- ca. -0,5°
–
- 034-401-Z069-8: 1 shim stack, front or rear – 8 shims, 16 bolts and washers
- 034-401-Z069-16: 1 shim stack, front and rear – 16 shims, 32 bolts and washers
- 034-401-Z069-32: 2 shim stacks, front and rear – 32 shims, 32 bolts and washers
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Stage 1 2-Piece 365mm Floating Front Brake Rotor Upgrade Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10)034-301-1005€1,524.90
2-Piece Floating Rear Brake Rotor Upgrade Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10)034-301-2005€1,376.43
Stainless Steel Braided Brake Line Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10)034-303-0019€204.47
Women's T-Shirt, Audi R8 Lines034-A01-1019-W€34.083 variants
T-Shirt, Audi R8 Lines034-A01-1019€34.086 variants




