Germany

← Back to catalogue

Dynamic+ Lowering Springs for Gen 1 & 1.5 Audi R8 4.2 FSI and 5.2 FSI 034-404-1010
  • Dynamic+ Lowering Springs for Gen 1 & 1.5 Audi R8 4.2 FSI and 5.2 FSI 034-404-1010
  • Dynamic+ Lowering Springs for Gen 1 & 1.5 Audi R8 4.2 FSI and 5.2 FSI 034-404-1010

Dynamic+ Lowering Springs, Audi R8 Gen 1 & Gen 1.5 (4.2 V8 & 5.2 V10)

Part number: 034-404-1010

Not listed by the manufacturer for your selected vehicle: Audi SQ5 B9/B9.5 (2018-2025) 3.0 TFSI

€396.73

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Lowering springs for the Audi R8 Gen 1 and Gen 1.5 (V8 & V10), engineered to work seamlessly with the factory Audi Magnetic Ride damping. They enhance handling dynamics and visibly lower the vehicle while maintaining excellent everyday ride comfort. In comfort mode the ride stays smooth, while sport mode delivers increased grip, balance, and performance for spirited back-road driving or track days.

Description

Product Description

These lowering springs were developed specifically for the Audi R8 Gen 1 and Gen 1.5 equipped with Audi Magnetic Ride. The goal was to noticeably improve handling performance while maintaining excellent ride quality. The springs deliver a more aggressive stance while remaining fully functional, rewarding drivers with precise vehicle control and OEM+ comfort levels. During extensive long-term testing, no detriment to strut life or to the distinction between the OEM suspension modes was observed. The springs were engineered in-house and tested thoroughly prior to release to achieve an ideal balance of performance, comfort, and reliability.

The springs were tested extensively on the street and track on a 2014 Audi R8 4.2 Gen 1.5, as well as by independent Audi enthusiasts, before release. Several spring variations were evaluated to balance handling, ride height, and comfort.

Each set of Dynamic+ Lowering Springs is manufactured in the USA at an ISO 9001 certified facility and tested to exacting specifications.

Why Dynamic+ Coil Spring Sleeves Are Needed

These lowering springs are not simply shorter versions of the factory spring. Contrary to a common misconception, the overall coil length matches the OEM spring. Instead, certain coils are positioned closer together and "stack" under load, producing the lowered ride height. Because these coils sit closer to one another, they can make contact as the suspension compresses and extends.

This coil stacking behavior is engineered into most aftermarket lowering springs, coilovers, and in some cases even OEM suspension, depending on the vehicle's original design.

Under heavy compression, coil stacking can sometimes generate extra noise. For this reason, Dynamic+ Coil Spring Sleeves are offered to dampen noise between coils. Not every Dynamic+ Lowering Spring application requires these sleeves; where needed, a pair is included and pre-installed in the correct location.

Features

  • Improved handling performance and chassis dynamics
  • Reduced body roll and understeer
  • Strong ride comfort on street and track
  • Aggressive stance with optimized wheel gap
  • Lightweight, high-strength construction
  • Compatible with Audi Magnetic Ride
  • Shot peened and powder coated
  • Made in USA at an ISO 9001 certified facility

Spring Rates

  • Front: approx. 30% increase – 815 lbs/in (stock: 628 lbs/in)
  • Rear: approx. 50% increase – 525 lbs/in (stock: 350 lbs/in)

Ride Height

  • Front: approximately 12mm (0.475") lower
  • Rear: approximately 29mm (1.125") lower

Recommended Alignment

The following specifications are derived from track use and are optimized for a lively rear end with a tendency toward oversteer. Caution should be exercised with these settings, as they can cause over-rotation and spin, particularly during throttle-lift conditions while cornering:

AxleTiresCamberCasterToe
Front255/35/19 Michelin Sport Cup 2-2.2° each side (with camber shims)6.0° each side (not adjustable)2.2mm toe-in
Rear315/30/19 Michelin Sport Cup 2-2.4° each side (with camber shims)–2.0mm toe-in (with adjustable toe arms)

The test vehicle was also equipped with front and rear sway bars, camber shims, and spherical suspension components from the Motorsport line.

Driving Impressions

The Audi R8 is already a formidable sports car in stock form, featuring double wishbone suspension front and rear, a neutral mid-engine balance, rear-biased drive combined with Quattro grip, and a lightweight chassis. In stock configuration, the R8 tends to push at the limit, as the suspension is relatively soft and the factory alignment favors tire life over outright grip. The factory sway bars are also small, promoting understeer for a safer street car rather than neutral, precise turn-in.

With the Dynamic+ suspension components installed, the front tires bite more decisively into a chosen line while the rear follows steering input more precisely, keeping the car on line through the corner. The result is a more neutral, sports-car-like handling character, while the vehicle remains fully usable for daily driving and gains a lower, more aggressive stance.

Front ride height reduction
ca. 12 mm / approx. 12mm (0.475")
Rear ride height reduction
ca. 29 mm / approx. 29mm (1.125")
Front spring rate
815 lbs/in (Serie: 628 lbs/in)
Rear spring rate
525 lbs/in (Serie: 350 lbs/in)
Surface treatment
Kugelgestrahlt und pulverbeschichtet / Shot peened and powder coated
Manufacturing
USA, ISO 9001 zertifizierte Fertigung / USA, ISO 9001 certified facility
Shipping weight
9.3 kg

–

  • Set of front and rear lowering springs
  • Dynamic+ Coil Spring Sleeves (where required for the application, pre-installed)
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products