Germany

← Back to catalogue

034Motorsport Density Line Adjustable Upper Control Arm Kit, Track Spec, B5/B6/B7/C5 Audi A4/S4/RS4 & A6/S6/RS6 - 034-401-1063
  • 034Motorsport Density Line Adjustable Upper Control Arm Kit, Track Spec, B5/B6/B7/C5 Audi A4/S4/RS4 & A6/S6/RS6 - 034-401-1063
  • 034Motorsport Density Line Adjustable Upper Control Arm Kit, Track Spec, B5/B6/B7/C5 Audi A4/S4/RS4 & A6/S6/RS6 - 034-401-1063
  • 034Motorsport Density Line Adjustable Upper Control Arm Kit, Track Spec, B5/B6/B7/C5 Audi A4/S4/RS4 & A6/S6/RS6 - 034-401-1063

Density Line Adjustable Upper Control Arm Kit, Track Spec, B5/B6/B7/C5 Audi A4/S4/RS4 & A6/S6/RS6

Part number: 034-401-1063

Fits your vehicle: Audi S4 B7 (2005-2008) 4.2L V8 40V

€765.49

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Adjustable upper control arms for drivers who track their cars and want dialed-in negative camber for sharper front-end cornering grip, improved feedback, and tighter control of suspension geometry thanks to higher-durometer inner bushings. NVH level: low to medium.

Description

Product Description

This adjustable upper control arm kit replaces the fixed factory front upper control arms on Audi B5/B6/B7 and C5 chassis vehicles, allowing precise, independent camber adjustment at each front wheel. These arms are built for drivers who track their cars and want dialed-in negative camber for improved front-end cornering grip, sharper feedback, and better control of suspension geometry, aided by higher-durometer inner rubber bushings.

Featuring CNC-machined billet aluminum construction, high-durometer rubber bushings, and genuine high-quality spherical rod ends, these control arms limit unwanted deflection in the suspension, resulting in tighter handling and more precise steering response than even new factory control arms can offer.

Benefits

  • Gain negative camber for increased cornering grip, better turn-in, and improved handling
  • Complete, drop-in replacement for factory control arms
  • Precisely adjust camber independently at each front wheel
  • Reduce deflection to maintain suspension geometry under load
  • Improve handling feel and steering precision

Features

  • -1.2 to -3.0 degrees of adjustment versus factory arms
  • CNC-machined billet aluminum arms for strength
  • High-durometer rubber bushings (65 durometer)
  • High-quality spherical bearings with self-lubricating Teflon race lining
  • Black anodized finish for durability
  • Rebuildable design

What's Included

  • Adjustable front upper control arms – front (left & right)
  • Adjustable front upper control arms – rear (left & right)
  • Rubber dust boots (set of 4)

Fitment

  • 1996–2008 Audi A4 (B5/B6/B7)
  • 2000–2008 Audi S4 (B5/B6/B7)
  • 2001–2005 Audi Allroad (C5)

Arms ship fully assembled as pictured. Price is for one kit covering one front suspension.

Installation Notes

Do not install the heim joints with less than eight threads engaged in the control arm. Fewer than eight threads of engagement can cause failure of the part. If your alignment requires less than eight threads of engagement, please contact us beforehand. Under no circumstances should the car be driven with less than eight threads engaged.

For vehicles with aluminum uprights, a minimum of six threads must remain visible between the heim joint lock nut and the outside end of the threads once the lock nut is fully tightened. Fewer than six visible threads may cause contact between the lock nut and the suspension upright, leading to damage and potential failure. Tighten the M10 pan head allen bolt to 45 ft/lbs with blue Loctite.

Camber can be adjusted without removing the control arms.

Rebuild Kits

Complete rebuild kits are available for these control arms.

Camber Adjustment Range
-1,2 bis -3,0 Grad gegenüber Serie / -1.2 to -3.0 degrees vs. factory
Material
CNC-gefrästes Aluminium-Vollmaterial / CNC-machined billet aluminum
Bushing Durometer
65 Durometer
Spherical Bearing
Selbstschmierende Teflon-Laufbahn / Self-lubricating Teflon race lining
Finish
Schwarz eloxiert / Black anodized
M10 Bolt Torque
45 ft/lbs mit blauem Loctite / 45 ft/lbs with blue Loctite
Shipping weight
3.5 kg

–

  • Adjustable front upper control arms – front (left & right)
  • Adjustable front upper control arms – rear (left & right)
  • Rubber dust boots (set of 4)
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products