Density Line Bump Stops, Front, 62mm
Part number: 034-403-Z006
€20.69
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Density Line Bump Stops restore the suspension travel lost when a vehicle is lowered. They deliver a progressive, tuned compression characteristic that factory or cut bump stops cannot match, restoring both ride comfort and handling precision.
Description
Engineered Travel, Tuned Control, Superior Comfort
Lowering a vehicle typically reduces usable suspension travel, causing the suspension to reach the factory bump stop much sooner than intended. This negatively affects handling, ride comfort, and the suspension's ability to keep the tires in consistent contact with the road. Density Line Bump Stops are engineered to restore this lost travel while adding a carefully tuned, progressive compression characteristic. The result is a more composed, predictable, and confident ride, particularly on lowered setups that depend on proper suspension geometry and travel management.
Why Suspension Travel Matters
Lowered vehicles lose usable suspension travel, causing the suspension to reach the factory bump stop much sooner than intended. A bump stop is designed by the OEM as a final-stage buffer, a rubber cushion that protects the shock and suspension components from bottoming out during extreme compression. At stock ride height, it is only meant to engage during hard impacts, serving as a safety and comfort device rather than a primary spring.
When a vehicle is lowered, this engineered clearance is reduced or eliminated. As a result, the shock engages the factory bump stop far more often and under lighter loads than intended. This turns the bump stop into an unintended secondary spring, restricting suspension movement, reducing the suspension's ability to absorb bumps, and preventing the tire from maintaining consistent load. The outcome is a noticeable loss of ride quality, grip, and handling precision.
| Lowered on OEM Bump Stops | Lowered on Density Line Bump Stops |
|---|---|
| The suspension stops absorbing bumps | Restores usable shock travel on lowered vehicles |
| The tire loses consistent load and grip | Keeps the suspension operating in its intended range |
| Handling becomes unpredictable | Improves chassis balance and stability |
| Ride quality becomes harsh and abrupt | Enhances comfort by allowing the shock, not the bump stop, to manage impacts |
Factory bump stops were never engineered for lowered ride heights, and cutting them only amplifies harshness.
Precision-Tuned Compression Rate
Factory bump stops are designed for stock ride heights and spring rates, which means they often fall short when a vehicle is lowered. Density Line Bump Stops are specifically engineered for lowered setups, particularly those running Dynamic+ Lowering Springs. Each bump stop is carefully shaped, sized, and density-matched to provide a progressive compression profile that acts like a miniature spring and damper. This allows for smooth, comfortable early travel while increasing firmness as the suspension approaches full compression, resulting in controlled body motion, predictable handling, and improved ride quality without harshness.
Platform-Specific Engineering
Every Density Line Bump Stop is designed to match its specific chassis, ensuring optimal suspension performance. By utilizing vehicle-specific shapes and lengths, these bump stops restore suspension geometry and travel to near-factory levels, even after lowering. Their compression rate and progression are tuned to complement Dynamic+ Lowering Springs, maintaining handling balance while providing consistent, predictable performance. The optimized length and compression characteristics ensure the bump stop works seamlessly with the rest of the suspension, forming a fully engineered performance package rather than a generic replacement.
Why Not Just Cut the Factory Bump Stop?
Cutting factory bump stops may seem like an easy fix and has been a common practice for years. However, trimming reduces the carefully tuned final phase of suspension travel that keeps the suspension controlled and the ride composed. The result is harsh bottom-outs, unpredictable handling, and a setup that never feels quite right.
Density Line Bump Stops are designed from the ground up for lowered vehicles, delivering the full range of motion the suspension needs with smooth, progressive control that cut factory stops cannot match.
| Cut Factory Bump Stops | Density Line Bump Stops |
|---|---|
| Not engineered for lowered ride heights | Engineered compression profile |
| Harsh, abrupt engagement | Progressive and smooth engagement |
| Minimal tuning for compression or damping | Increased usable travel and improved control |
| Reduced comfort and poor control | Maintains stability under load, dramatically improved ride comfort, ideal complement to Dynamic+ Lowering Springs |
Features
- Designed for lowered vehicles
- Improves handling and comfort
- Tuned to complement Dynamic+ Lowering Springs
- Made from OEM-quality PUR (polyurethane) material
- Reduced height helps maintain full suspension movement on lowered vehicles: OE height 81.5mm, 034 height 62mm
- Increased durometer over OE for more effective compression limiting without becoming overly harsh: OE 50A, 034 55A
Part Number Interchange
- 8R0 412 131 D
- 8K0 412 131 E
What's Included
- 1 pair of bump stops
- Material
- Polyurethan (PUR), OEM-Qualität
- OE Height
- 81,5 mm
- 034 Height
- 62 mm
- OE Durometer
- 50A
- 034 Durometer
- 55A
- Shipping weight
- 0.5 kg
–
Audi (13)
- Q5 B9/B9.5 (2018-2025) 2.0 TFSI
- Q5 B8/B8.5 (2009-2017) 2.0 TFSI
- Q5 B8/B8.5 (2009-2017) 3.0 TDI
- Q5 B8/B8.5 (2009-2017) 3.0 TFSI
- Q5 B8/B8.5 (2009-2017) 3.2L FSI
- Q7 4M (2017-2019) 2.0 TFSI
- Q7 4M (2017-2019) 3.0 TFSI Supercharged
- Q7 4M.5 (2020+) 2.0 TFSI
- Q7 4M.5 (2020+) 3.0 TFSI
- Q8 4M8 (2019+) 3.0 TFSI
- SQ5 B9/B9.5 (2018-2025) 3.0 TFSI
- SQ5 B8/B8.5 (2012-2017) 3.0 TDI
- SQ5 B8/B8.5 (2012-2017) 3.0 TFSI
- 1 pair of bump stops
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com







