Germany

← Back to catalogue

Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009
  • Dynamic+ Lowering Springs For B8/B8.5 Audi Q5/SQ5 034-404-1009

Dynamic+ Lowering Springs for B8/B8.5 Audi Q5/SQ5

Part number: 034-404-1009

Not listed by the manufacturer for your selected vehicle: Audi S5 B10 (2025+) 3.0 TFSI

€397.96

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Dynamic+ Lowering Springs for the B8/B8.5 Audi Q5/SQ5 lower the vehicle noticeably and sharpen handling while preserving a high level of ride comfort. They were engineered in-house and extensively tested on Q5 and SQ5 development vehicles to strike a balance between stance, dynamics, and everyday usability.

Description

Product Description

Dynamic+ Lowering Springs were engineered and tested in-house to deliver a noticeable improvement in handling while maintaining a high level of ride comfort. Designed as a no-compromise solution, they provide an aggressive yet functional stance and reward the driver with precise vehicle control at near-OEM comfort levels.

These springs were thoroughly evaluated on the street and track on B8 Q5 and B8.5 SQ5 development vehicles, as well as by independent Audi enthusiasts, prior to release. The selected spring rates, unique dual-rate spring design, and ride height are the result of months of testing — thousands of miles of commuting and aggressive back-road driving — resulting in a lowering kit matched to the factory dampers.

The goal is never to offer maximum lowering at the expense of damper control and performance, or a stance so low that the car scrapes or bottoms out. The underlying engineering approach is to optimize across a broad range of product variables to achieve the best overall performance.

Each set of Dynamic+ Lowering Springs is manufactured in the USA at an ISO 9001 certified facility and tested to exacting specifications to ensure a high level of handling performance. These springs are a suitable suspension solution for Audi Q5/SQ5 owners who want to lower their vehicle and enhance the driving experience.

Why Are Dynamic+ Coil Spring Sleeves Needed?

Dynamic+ Lowering Springs are not simply shorter versions of the stock spring. Contrary to common assumption, the overall coil length matches that of the OEM spring. However, some coils are positioned closer together and "stack" under load, which produces the lowered ride height. Because these coils sit closer to one another, they can make contact as the suspension compresses and extends.

This coil-stacking behavior is inherent in the design of most aftermarket lowering springs, coilovers, and in some cases even OEM suspension, depending largely on the vehicle's engineering.

Under heavy compression, coil contact can create excess noise. For this reason, Coil Spring Sleeves are offered for certain Dynamic+ Lowering Springs to dampen noise between coils. Not all applications require these sleeves; where needed, a pre-installed pair is included in the correct location.

Features

  • Improved handling performance and chassis dynamics
  • Reduced body roll and understeer
  • Strong ride comfort and quality
  • Optimized lowering for sufficient ground clearance and damper performance
  • Slight positive rake to accommodate loads
  • Manufactured to a tolerance of +/- 5% (industry standard is +/- 10%)
  • Lightweight, high-strength construction
  • Compatible with Audi Adaptive Suspension
  • Shot peened and powdercoated
  • Made in the USA at an ISO 9001 certified facility

Ride Height

Provides between 2.5" and 3.5"** of lowering.

  • Front: 60mm-80mm lower
  • Rear: 60mm-80mm lower

** Exact lowering amounts can vary from car to car depending on whether it is a Q5 or SQ5, as well as wheels, offsets, spacers, and the rolling diameter and width of different tire sizes and brands, all of which affect both the actual drop and its visual appearance. While exact distances can vary, the percentage drop is consistent with the natural variability found in all spring designs; due to the significant drop of these springs, those differences become more noticeable. Performance, handling, and ride quality are consistent across all springs, as is the positive rake, with the front sitting slightly lower than the rear — providing a balanced look and allowing the rear suspension to remain level under heavier loads.

Note

Pairing with Density Line Bump Stops is recommended.

Installation Effort and NVH

Installation effort is rated as high. NVH (noise, vibration, harshness) transferred to the cabin is rated as low, though some users report a mild increase in road noise. If unusual noises occur after installation, verify that all components were installed and torqued to specification.

Country of Manufacture
USA
Manufacturing Tolerance
+/- 5%
Front Lowering
60-80 mm
Rear Lowering
60-80 mm
Finish
Kugelgestrahlt und pulverbeschichtet / Shot peened and powdercoated
Shipping weight
12.7 kg

–

–

Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products