Germany

← Back to catalogue

Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI
  • Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047
  •  Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI 034-145-Z047

Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI

Part number: 034-145-Z047 / 034-202-6006Bundle

Not listed by the manufacturer for your selected vehicle: Volkswagen Jetta/GLI Mk5 (2005-2010) 2.0 TDI

€842.16 – €1,073.39

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Pulley Upgrade: Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Complete hardware kit for upgrading the supercharged 3.0 TFSI V6 to Stage 2+ performance levels. Includes a supercharger pulley, 190mm crank pulley, and matching belt for up to 540HP and 491FT-LBS of torque when combined with appropriate tuning software. Tuning software is not included.

Versions
VersionPart numberPrice
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · –034-145-Z047 / 034-202-6006: 034-145-Z047€842.16
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI · ✓034-145-Z047 / 034-202-6006: 034-145-Z047 + 034-202-6006€1,073.39

Description

Product Description

This kit includes all hardware required to upgrade an Audi B8 S4/S5/SQ5, C7 A6/A7, or D4 A8 equipped with the supercharged 3.0 TFSI V6 to Stage 2+ performance levels. The components provide the mechanical foundation for a significant power increase on the supercharged platform.

Dynamic+ 3.0 TFSI Performance Software is flashed via the factory OBD-II port and does not require any physical modification of the ECU. Stage 2+ is available in 91 Octane, 93 Octane, 100 Octane, 104 Octane, and E40 calibration files.

Note: Software is sold separately and not included in this kit.

What's Included

  • Supercharger Pulley Upgrade
  • 190mm Billet Crank Pulley Upgrade
  • 1310mm Dynamic+ Supercharger Belt
  • Installation Hardware

Supercharger Pulley Upgrade

At 57.70mm in diameter, this supercharger pulley is significantly smaller than the factory unit, increasing the drive ratio of the supercharger. Spinning the supercharger faster yields increased boost pressure throughout the RPM range, resulting in increased horsepower and torque when paired with Stage 2+ Performance Software.

190mm Crank Pulley Upgrade

This 190mm crank pulley for the Audi B8/B8.5 S4/S5/Q5/SQ5, C7 A6/A7, and D4 A8 increases supercharger rotational speed to provide more boost. It is compatible with both the OEM supercharger pulley and the upgraded supercharger pulley included in this kit.

Machined from a single piece of 6061-T6 billet aluminum and black anodized for a durable, corrosion-resistant finish, this design is 62% lighter than the OE pulley, significantly reducing rotational weight and parasitic loss. It is a complete single-piece inner and outer pulley, not a pulley "overlay," which would add rotational weight.

Features:

  • Machined from a single piece of 6061-T6 billet aluminum
  • Black anodized with laser engraving for a durable finish
  • 62% lighter than stock – reduced parasitic loss
  • Complete inner and outer pulley, not just an overlay that adds weight

Dynamic+ Supercharger Belt

This Dynamic+ supercharger belt delivers the strength and stability required by high-output EA837 3.0T engines, ensuring consistent boost and reliable performance for daily driving as well as track use.

Features:

  • Increased strength over the factory belt
  • High heat resistance
  • Engineered to support high speeds, boost, and rapid accelerations
  • 7-rib Micro-V belt made to strict OEM dimensional specifications
  • Aramid fiber reinforcement – will not stretch
  • Anti-squeal design

Stage 2+ ECU Tuning (Not Included)

Dynamic+ Stage 2+ Performance Software for the Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, and D4 A8 3.0 TFSI is engineered to further increase horsepower and torque beyond Stage 2 levels when this 190mm crank pulley is used together with the upper supercharger pulley. The pulley upgrade allows for increased boost pressure from the factory Eaton TVS1320 supercharger throughout the powerband, while proprietary calibrations safely extract additional power from the 3.0 TFSI engine.

Stage 2+ Performance Software raises the redline to 7,400 RPM, resulting in a broader powerband and higher peak horsepower figures than the factory 6,400–7,000 RPM maximum (stock RPM limit depends on B8 or B8.5 generation). Throttle mapping in both Dynamic and Comfort modes has also been refined for improved throttle response and more precise modulation. The software additionally enables left-foot braking for improved vehicle control on track.

  • Increased horsepower and torque throughout the powerband
  • Improved power delivery, acceleration, and driving characteristics
  • Available in 91 Octane, 93 Octane, and 100 Octane calibrations
  • Refined throttle mapping for enhanced response and precision
  • Raised RPM limit for a broader powerband
  • Speed limiter removed for increased top speed
  • Track-tested calibrations for consistent power delivery
  • Flashed directly via the factory OBD-II port

Advanced Launch Control

Dynamic+ tuning includes advanced launch control programs for the 3.0T supercharged engine. Desired launch RPM can be adjusted on the fly via the cruise control stalk. Intercooler pumps and engine fans run at full speed below 10kph, ensuring full cooling during staging. This results in the coolest possible intake air temperatures and allows the launch settings to be tailored to current conditions.

DSG Software Upgrade (Not Included)

Flashed directly through the vehicle's OBD-II port, this calibration for the DL501 TCU safely raises the factory transmission's RPM limiter, increasing the available powerband to make full use of Stage 1/2 Performance Software. It also increases shift speed and optimizes shift points in Drive and Sport modes for improved performance and driveability, without sacrificing comfort or reliability.

The DL501 Performance Software was developed in-house on a dedicated B8 Audi S4 development vehicle and refined on multiple enthusiast-owned B8/B8.5 Audi S4/S5 vehicles before release.

Features:

  • Raised RPM limit for use with Stage 1/2 Performance Software
  • Optimized shift points in Drive and Sport modes
  • Increased shift speed
  • Manual mode auto-downshift disabled
  • User-selectable 4-step launch control (3,000 RPM, 3,500 RPM, 4,500 RPM, 5,000 RPM)
  • Raised launch control counter limit (from factory 200)
  • Flashed directly via the factory OBD-II port – no TCU removal needed

Dynamic+ End User Flashing Kit (Not Included)

This kit allows customers to install Dynamic+ Performance Software themselves. It also enables customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software.

Requirements for End User Flashing:

  • Windows 10 laptop with available USB port
  • Power supply for laptop
  • Secure wired (or very stable WiFi) high-speed internet connection
  • CTEK trickle charger (or similar)
  • Available electrical outlets
Crank Pulley Material
6061-T6 Aluminium (Billet), schwarz eloxiert / 6061-T6 billet aluminum, black anodized
Supercharger Pulley Diameter
57,70 mm / 57.70mm
Crank Pulley Weight Reduction
62% leichter als Serie / 62% lighter than stock
Belt Length
1310 mm / 1310mm
Belt Type
7-Rippen Micro-V-Riemen mit Aramidfaser-Verstärkung / 7-Rib Micro-V belt with Aramid fiber reinforcement

–

  • Supercharger Pulley Upgrade
  • 190mm Billet Crank Pulley Upgrade
  • 1310mm Dynamic+ Supercharger Belt
  • Installation Hardware
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products