S34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI
Part number: 034-108-1027
Not listed by the manufacturer for your selected vehicle: BMW 4 Series F82/F83 (2015-2020) S55 3.0L
€553.74
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The S34 Carbon Fiber Intake was developed specifically for the supercharged 3.0 TFSI found in the B8/B8.5 generation Audi S4 and S5. It delivers measurable power gains, a more aggressive induction and supercharger sound, and a clean, functional look thanks to its carbon fiber heat shield.
Description
Product Description
This comprehensive intake solution was developed for the supercharged 3.0 TFSI engine found in the B8 and B8.5 generation Audi S4 and S5. The S34 Carbon Fiber Intake offers measurable increases in horsepower and torque, a more aggressive induction sound with enhanced supercharger whine, and a carbon fiber heat shield that keeps hot engine bay air out of the intake tract.
Throughout development, multiple designs were modeled, prototyped, and tested to ensure measurable performance benefits as well as excellent fitment. The result is an optimized open-airbox design that uses the factory fresh air duct inlet to channel cool outside air to the filter. The large airbox design accommodates a 4" inlet conical air filter free of restrictive shrouding, with air channeled through a CFD-optimized 4-ply silicone inlet hose that smoothly increases air velocity toward the throttle body.
Minimizing Unnecessary Filter Shrouding
A critical factor in a high-flowing intake is the ability of air to flow freely around and into the filter. If airflow around the filter is restricted, flow into the filter suffers as well. Many aftermarket kits fit an oversized filter into an enclosure that cannot properly accommodate it, choking the filter and reducing overall flow — typically the result of optimizing for one variable at the expense of others. Extensive testing led to a design that maximizes airflow surrounding the filter as well as through it. The result is a correctly sized filter in a correctly sized housing, delivering maximum airflow and performance with OEM-level filtration.
Maximizing Airflow
A CFD-optimized 4-ply silicone intake tube was developed as a direct, high-performance replacement for the plastic factory accordion/sound-deadening hose. Using CAD software and 3D scanning technology, the cross-sectional area of the intake tube was optimized while respecting the available space constraints. The result maximizes performance within the factory packaging while featuring smooth transitions that ensure optimal airflow to the throttle body.
Performance Air Filter
The S34 Carbon Fiber Intake houses a high-flow conical air filter with a double-layer pleated cotton filtration medium capable of trapping particles as small as 5 microns. This design increases flow through an enlarged filtration surface while maintaining superior filtration. The filter has been tested in applications exceeding 800 HP with minimal restriction and OEM-quality filtration.
While many intake kits leave the air filter unsupported and prone to movement, a dedicated filter support prevents unwanted movement while still allowing compliance for engine movement under varying load. The air shroud also remains stationary, avoiding rubbing against other engine bay components as seen with many other designs.
Pressure Drop Improvements
Pressure drop is the difference between ambient air pressure and the air pressure measured at the supercharger inlet across the engine's rpm range. The higher the pressure drop at a given rpm, the more restrictive the intake system is, reducing airflow.
| Intake Configuration | Chart Color | Pressure Drop |
|---|---|---|
| S34 Carbon Fiber Intake | Yellow | -0.97 psi |
| Stock Intake | White | -2.18 psi |
Dyno-Verified Wheel Horsepower & Torque Gains
Development was validated on multiple vehicles using a Mustang AWD dynamometer, confirming substantial gains in horsepower and torque with both stock and ported supercharger configurations.
Peak Wheel Horsepower & Torque with Stage 2+ E40, 57.75/190mm Pulley Combo
- Stock Intake: 416 WHP / 396 WTQ
- S34 Carbon Fiber Intake: 436 WHP / 416 WTQ
- Peak Crank Gains: 26 HP / 24 TQ
Product Features & Details
- Developed in-house
- Fits both left- and right-hand drive configurations
- High-quality carbon fiber air block-off heat shield
- High-gloss epoxy finish
- 4-ply gloss black silicone intake tube
- OEM+ fit and finish
- No rubbing or excessive movement
- Dyno-proven horsepower and torque gains
- Improved airflow from factory airbox and intake tube
- Enhanced engine induction sound
- Improved throttle response
- Large 4" inlet conical pleated cotton air filter
- Reduced intake air temperature
- Secure installation using factory mounting grommets
- Simple, straightforward installation instructions
CFM Gains
CFM stands for cubic feet per minute of airflow — the higher the number, the more horsepower an intake can support. All intakes are tested at 28" of water on a Superflow airflow bench for accurate, repeatable results.
- Stock Intake: 541 CFM @ 28" H₂O
- S34 Intake: 904 CFM @ 28" H₂O
- Filter Inlet Diameter
- 4 Zoll / 4 in
- Intake Hose
- 4-lagiges Silikon, hochglänzend schwarz / 4-ply silicone, gloss black
- Filtration Rating
- 5 Mikron / 5 microns
- Airflow (Stock)
- 541 CFM @ 28" H2O
- Airflow (S34)
- 904 CFM @ 28" H2O
- Pressure Drop S34
- -0,97 psi / -0.97 psi
- Pressure Drop Stock
- -2,18 psi / -2.18 psi
- Shipping weight
- 4 kg
–
- S34 Carbon Fiber Heat Shield
- S34 4" Inlet Silicone Hose
- S34 4" Double-Layered Cotton Pleated Filter
- S34 Secondary Air Injector Filter
- Metal Mounting Bracket for Intake Hose
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Supercharger Heat Exchanger Upgrade Kit for Audi B8/B8.5 S4034-102-1000€1,567.50
3.0 TFSI Supercharger Pulley Upgrade, B8/B8.5 Audi S4/S5/Q5/SQ5 & C7 Audi A6/A7034-145-Z034€242.18
Drivetrain Mount Insert Package, Billet Aluminum, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & Porsche 95B Macan034-509-6000€357.80











