Germany

← Back to catalogue

Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10) 034-4ZZ-0014
  • Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10) 034-4ZZ-0014
  • Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10) 034-4ZZ-0014
  • Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10) 034-4ZZ-0014
  • Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10) 034-4ZZ-0014
  • Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10) 034-4ZZ-0014
  • Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10) 034-4ZZ-0014

Dynamic+ Camber Toe Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10)

Part number: 034-4ZZ-0014

Not listed by the manufacturer for your selected vehicle: Audi SQ5 B9/B9.5 (2018-2025) 3.0 TFSI

€772.80

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Kit for extended camber and toe adjustability on the Gen 1/1.5 Audi R8. Includes a camber shim kit and adjustable rear toe links, matched for improved chassis performance. Installation effort: mild. NVH level: medium to high.

Description

Product Description

This kit is intended for drivers who want to adjust the suspension of their Gen 1/1.5 Audi R8 beyond factory alignment limits. It combines a camber shim kit with adjustable rear toe links, providing a significantly wider range of camber and toe adjustment than stock.

Kit Features

  • Reengineered suspension geometry for performance driving
  • Increased adjustability of camber and toe beyond factory levels
  • Significantly enhanced cornering grip
  • Improved steering feel and handling response
  • Designed for easy, precise, on-car adjustability

Kit Contents

  • Camber shim kit (32-piece set)
  • Adjustable rear toe links (Motorsport line)

Camber Shim Kit – Description

The camber shim kit for the Gen 1 & 1.5 Audi R8 allows the easy addition of negative camber. Each shim extends the maximum adjustable camber range by spacing out the lower control arm on the front and rear suspension, improving both turn-in and cornering grip.

Adding negative camber substantially improves turn-in and mid-corner grip by maximizing lateral tire grip, allowing higher cornering speeds both on track and during spirited road driving.

As cornering loads increase, tire distortion and body roll increase as well, loading the outer half of the tire more heavily. Increasing static negative camber counteracts this, allowing the tire's contact patch to be optimized at maximum cornering load, improving traction and tire wear.

The Audi R8 uses a double-wishbone suspension front and rear, with upper and lower control arms connecting the wheels to the chassis. Camber at both axles is controlled via the lower control arm and has a limited factory range of approximately 1.3°. The shims are installed between the lower control arm and the chassis, increasing the overall camber range. Up to two shims can be installed per lower control arm bolt point, allowing up to -4.3° of negative camber in front and -3.5° in the rear.

Camber Shim Kit – Features

  • Changes the overall camber range; will not guarantee camber gains unless aligned accordingly
  • Each shim adds approximately -0.7° in front and -0.5° in the rear
  • Precision laser-cut from aluminum plate
  • Can be installed with the car on an alignment rack – remove only one bolt at a time
  • New Grade 12.9 M8x1.25x30 bolts and washers included
  • Note: Staggering shims in the front suspension does not add caster
  • Note: Loctite required on new bolts, torqued to 30 Nm

Camber Shim Ranges*

Front
Shims InstalledMinMax
0 (Stock)-1.5°-2.8°
1-2.2°-3.5°
2-3.0°-4.3°
Rear
0 (Stock)-1.1°-2.5°
1-1.6°-3.1°
2-2.3°-3.5°

*Note: Total adjustable range may vary depending on ride height, whether stock or lowered. The values above were measured with Dynamic+ Lowering Springs installed.

Adjustable Rear Toe Links – Description

These toe links replace the fixed, cast-aluminum factory rear toe links on the Gen 1 & Gen 1.5 Audi R8 with a performance-engineered adjustable design.

The adjustable rear toe links allow simple, precise toe adjustments for optimizing track performance or tire wear. They feature Aurora spherical rod ends for maximum precision and durability, maintaining proper suspension geometry under hard cornering.

The toe links were thoroughly tested on street and track on a Gen 1.5 Audi R8 4.2L V8 development vehicle prior to release. They are direct replacements for the factory parts and are fully serviceable and rebuildable.

Adjustable Rear Toe Links – Features

  • Precise toe adjustment
  • Eliminates all bushing deflection
  • Improved handling
  • CNC-machined 6061-T6 aluminum tie rod bodies, anodized black for durability
  • CNC-machined aluminum rod end spacers
  • Aurora spherical rod ends with self-lubricating Teflon race lining
  • Designed for easy, precise, on-car adjustability
  • Direct drop-in replacement for factory toe links

Recommended Track Alignment

These alignment specifications are suited to a track-driven car with a very "loose" handling attitude and a lively rear end that drives towards oversteer. Caution should be used with these settings, as they can cause the car to over-rotate and spin, especially under throttle-lift conditions while turning and during trail braking:

Front (Tires: 255/35/19 Michelin Sport Cup 2)

  • Camber: -2.2° each side (with camber shims)
  • Caster: 6.0° each side (not adjustable)
  • Toe: 2.2 mm toe-in

Rear (Tires: 315/30/19 Michelin Sport Cup 2)

  • Camber: -2.4° each side (with camber shims)
  • Toe: 2.0 mm toe-in (with adjustable toe links)

The test vehicle was additionally equipped with front and rear sway bars, Dynamic+ Lowering Springs, and other spherical Motorsport line suspension components.

Shim material
Aluminium, lasergeschnitten / Aluminum, laser-cut
Camber gain per shim, front
ca. -0,7° / approx. -0.7°
Camber gain per shim, rear
ca. -0,5° / approx. -0.5°
Maximum camber, front (2 shims)
-4,3°
Maximum camber, rear (2 shims)
-3,5°
Bolt grade
Festigkeitsklasse 12.9, M8x1,25x30 / Grade 12.9, M8x1.25x30
Torque spec
30 Nm
Tie rod body material
6061-T6 Aluminium, schwarz eloxiert / 6061-T6 aluminum, black anodized
Rod ends
Aurora Kugelgelenke mit Teflon-Gleitlagerung / Aurora spherical rod ends with Teflon race lining
Shipping weight
2.7 kg

–

  • Camber shim kit (32-piece set)
  • Adjustable rear toe links (Motorsport line)
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products